Fender Rhodes Cheek Block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fender Rhodes Cheek Block
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
I was fixing up a ‘72 Fender Rhodes that was missing the cheek blocks, so I designed this model from scratch instead of buying reproduction blocks. I secured each block with a wood screw into the existing hole on the frame, and then secured the name-rail to the blocks with some generic hex nuts/bolts (you’ll see how the 10mm hex nuts fit up inside the model).
It is different than the factory/reproduction cheek block design, and not perfect, but it gets the job done. Rather than further tinkering I stopped at the ‘good enough’ point to get back to making music.
I printed it PETG, with 10% infill, with supports everywhere.