Liczymy pasujące modele…
Activate firmware retraction in your slicer. Activate firmware retraction in klipper by adding this to you printer.cfg : [firmware_retraction] retract_length: 0.8 retract_speed: 60 unretract_extra_length: 0 unretract_speed: 60 Slice the…
Since I could not find the ideal temp tower that meets my expectations, I designed my own. Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the…
Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the layer adhesion by breaking it - A bridge, from 30mm length in the back to 35mm in the front -…
Behold, a much more ultimate stringing test. Optimized to lower print time while still giving you clear results on retraction/temp/speed setting tweaks. With typical settings, I found print times of 10 minutes. If you still want it,…
Badminton Stringing Machine Side Support need M8 bolt without head
Behold, a much more ultimate stringing test. Optimized to lower print time while still giving you clear results on retraction/temp/speed setting tweaks. With typical settings, I found print times of 10 minutes. If you still want it,…
For 3,5 turns of string The length of the gauge needs to be adjusted according to the diameter of the tuning pin. 7mm - 72.5mm 7.10mm - 73.5mm 7.20mm - 74.6mm...etc.
If your printer can print this, then you have the best printer post a make ( my guess is there will be no makes) Category: 3D Printing Tests
Stable lacrosse head stand designed for stringing, restringing, and displaying men’s field lacrosse heads. The stand slides directly into the throat of a men's field lacrosse head , creating a stable hands-free workstation while following…
fast and easy stringing test to test the stringing of all 3d printers
These oversized, two-sided letter beads are meant to stand out:) I designed two sets: one for horizontal stringing and one for vertical stringing. Perfect for making keychains, luggage tags, or chunky necklaces 😂 3D Print Settings: PLA…
I use this test for years because it fast to print and easy to use, you can easely understand what to do to solve your problem whit stringing and bridge failure. If you don't want to test bridge you can make a cut at 22mm height and…
print to test your stringing on your printer if there is string try a medium retraction speed with o.6 retraction and a z hop (different settings for different printer
Noise-Reducing Damper for Wilson Baiardo Stringing Machine Effectively reduces the loud noise produced when the clamp drops, creating a quieter workspace. Dimensions Inner hole ø14.1mm Outer ø17.1mm Filament used TPU - Filatech FilaFlex…
With this model you can test the print quality at various distances and speeds. This model can be printed in less than an hour and uses less than 5 grams. I would appreciate your feedback to help improve the model. Follow me on X for more…
I designed these to be printed very quickly so you can test your retraction settings without wasting a lot of time/filament.
Badminton Stringing Machine Side Support need M8 bolt without head
I have desinged a few test models and hears what you need to know about them: Calibration Cube: Print Time: 20min Size: 15x15x15mm It tests how acuate the X,Y, and Z belts are. After it prints you need to mesure it.(with something more…
Can be scaled to diffrent Sizes. Also good for sla resin printer
diameter : first circle:3mm second circle: 5mm square:4x4mm and last random shapes separated by 2mm the whole is 80x20x41mm (without a base 40mm)
A basic model to test your printer for: Z wobble/banding, ringing after corners, pressure advance, seam and VFA. It also have indicator every 10 mm. Chose a size or take the biggest one and use the cut feature in your slicer to cut it at…
A few different stringing test. Because models are different so this will help to test stinging. They can be used for any type of filament.
A simple low poly curve, it's a great test for retraction and combing settings.
This is an all-in-one PLA/PLA+ Temperature Tower inspired Tronnic! I've duplicated it along the y-axis and added "X" and "Y" letter indents so that ghosting/ringing is tested for each temperature along with the original tests to take…
A fast retraction test that also tests your printer's overhang up to 75°! This is a useful calibration test tool that uses less than 2g of filament! Feedback and Makes are always appreciated, If you're up for another challenge, check out…
Making the model solid, it only took about 1.5 meters of filament, great test to be able to run out some scrap filament shorts you might have laying around!
When I saw this flexi bat I thought I could Bring it to printables add an upgrade I think it's pretty cool especially with the logo!! Recommend pla printing speed 40 to 60 any filament would do.
Adjustable Stringing Test Model This adjustable stringing test model is designed to help you fine-tune retraction settings for your 3D printer. It consists of a base and stackable levels , giving you the flexibility to test one or…
This is a very simple stringing test you can use to dial in your printer's retraction and other settings. 'Nuff said. Pssssst! Hey this is me from the future. Check out my new Ultimate-er Stringing Test that's like 100 times better than…
Here is an upload of a hair tie dinosaur that has storing, its a really good model and can be used for just decoration and not even storing recommend pla [or any filament] printing speed 40 to 60 just take it slow to make the best details.
This test part is optimized so that you can print it quickly to achieve many iterations in a short period of time without wasting too much filament.
A simple test for testing bridging and stringing which I made in Tinkercad. Enjoy! UPDATE- I uploaded a new file : Bridging & Stringing Test V2 This file is an updated version of the previous one. I changed it so that it will take less…
A stringing test I made in Tinkercad to test your 3D printer on stringing. Enjoy! -Please help me by downloading and liking this model, its free! It would be REALLY appreciated!😀
I adapted a version of my original stringing test to print faster. I recommend using 0.2 mm layers for speed while getting informative results. I hope it's helpful.
This is a stringing test that I made that also somewhat tests bed adhesion because of it's size.
File "rozeta sroub zaslepený" print 1 pc. "rozeta sroub" 3 pcs. Brass tube has an outer diameter of 9mm. Screws and nuts M6.
Test for all printers with different distances between the cones. Material: All Nozzle: 0,4mm (your choise) Layerhigh: 0,2mm Brim: none Supports: none
Stringing Test Planning to buy something on Prusa3D.com? Use the referral code @FFFprint at checkout and get rewarded.
Introducing FlickFlash , where modern technology meets the charm of the past in a fun and creative way. This innovative phone mount projector transforms your smartphone into a mini movie projector, using its flashlight to cast hand-drawn…
Badmintonový adaptér do vyplétacího stroje. Modrý je originální díl. Odzkoušeno PLA a PCTG.
Read the guide on stringing and oozing: https://help.prusa3d.com/en/article/stringing-and-oozing_1805 Test different retraction lenghts and temperature settings. About 8 minutes print time.
Its a quick and easy was to test your printer for stringing, helps you fine tune your setting for future prints
For 3,5 turns of string The length of the gauge needs to be adjusted according to the diameter of the tuning pin. 7mm - 72.5mm 7.10mm - 73.5mm 7.20mm - 74.6mm...etc.
This is a fairly simple build. It involves four parts. One the block base. The second is the socket base which fits onto the block base. The third is the socket ball which fits into the socket base. The fourth is the tightening screw,…
If you would like to change the temperatures of the objects you can Ctrl + F with "Set temp for object " + the number of the object you would like to change (1-6).
Just print the model and see if you need to fix anything.
Layer height 0.2mm - recomended. I use PETG and ABS on speed 80 - 100 mm/sec. Not having an ADXL accelerometer handy, I decided to take a non-traditional route. I tried to make the model use as little plastic as possible while packing in…
If your printer can print this, then you have the best printer post a make ( my guess is there will be no makes) Category: 3D Printing Tests
Open your slicer and select your filament profile. Set the print temperature to the lower end of the recommended range. Enable retraction in the printer settings. Set the retraction distance (start with 4–6 mm for Bowden, 1–2 mm for…
I've made these small temperature tower models so they can be printed relatively quickly in about 30 mins. Each model has 9 levels in 5 °C increments and a range of 40 °C. They range from 190-230 °C (suitable for most PLA filaments) to…
to be used to start mains with the clamp raiser (raises for 25mm) offsets to be used on crosses, to offset 50mm
This is more or less a remix of the linked Nano All in One 3D printer test. I printed all of that just fine except the overhang after 45 degrees. It took me awhile to dial in the settings to get my overhangs looking good. After probably…
Stable lacrosse head stand designed for stringing, restringing, and displaying men’s field lacrosse heads. The stand slides directly into the throat of a men's field lacrosse head , creating a stable hands-free workstation while following…
Designed with using firmware retraction in mind. Tested with 0.4 and 0.6mm nozzles at layer hights up to 0.4mm. If a smaller nozzle is used, scaling it may be an option. First picture shows the default dimensions and distances, second…
Bring the iconic look of the James Webb Space Telescope (JWST) to your home! This set of stars, featuring the signature diffraction spikes, is specifically engineered for a fast, clean, and frustration-free printing experience. I went…
Adds a decent sling mounting point and some schnazzy sights to your HC Diana. Uses three M3x10 screws, one M3x20, and you'll want to replace your solenoid screws with some sort of 8mm screws, countersunk or not. You just need a little…
Very quickly slapped together Stringing Test. Markings 1cm apart so you can post-process z-height changes. Deliberatly no temperature numbers b/c they confuse when you use different temperatures (or - like me - test retract distances…
this model for checking how good your printer actually and it doubles up as a wall art
You can test the cooling power of a 3D printer and the effect of nozzle temperature on the models.
A quick stringing test for your printer thats easy and fast, have fun printing.
Recommend sizing it up
Purpose of the Model Parametric temp tower for temperature tests, stringing, and bridging. Similar to models by Extrutim and the fixed version of FlorinB . Rebuilt from scratch in FreeCAD 1.1.1. Requirements To create your specific temp…
Adapted this stringing and retraction test for use with the 8 Tool INDX. I have already colored it based on toolhead to make it quick to use. Let me know if you want any changes!
Simple 2-Tower Stringing Test Welcome to the ultimate quick-and-easy stringing test! This simple two-tower model is designed to help you dial in your 3D printer's settings and banish those annoying plastic cobwebs for good. Whether you…
Print this model to fine-tune and test your slicer settings and get rid of annoying stringing. This is the original, Basic Stringing Test by Loohney with over 160,000 downloads on other platforms. Angus from Maker's Muse has an excellent…
Battle stringiness by enhancing retraction and/or wipe, or eliminating Z-hop. At the end of the day, a good quality filament or a very dry one will just not string. The two white prints in the picture are simply befor and after a spool…
Please give it a ❤️ if you like it 🥰 Vous trouverez toutes les infos sur le cache et la manière de nettoyer votre ventilateur de hotend ici : Pour retrouver tout ce que j'utilise : https://kgy.yt/matos Please give it a ❤️ if you like it 🥰
Another in my series for makers to earn achievements for their dedication to 3D printing. Model prints with no supports and with 10% infill. Optional panels are included if you want to print brown/wood covers for the model base. This…
A simple test for bringing and stringing performance. It is very fast and costless in terms of filament. About 4g of filament and 15-20m test, you can obviously scale it in the slicer if you wanna. I needed a fast test for a fast tweaking…
There are lots of stringing tests available. I just wanted one with a thin base to get results fast. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: .1 mm Infill: 100% Filament: Eryone PLA…
A quick model I whipped up to test stringing over 5mm, 10mm, and 25mm gaps. Can use this to test your profiles.
This test was built to test stringing under unfavorable conditions in the minimum amount of material possible. I designed it because I had consistent stringing issues and printed larger stringing tests over and over, wasting about 2kg of…
The Advanced Retraction Test allows the user to tune retraction while taking into account variable distance. This uses 4 pillars that start at 5mm tall and increments by 5mm. 5, 10, 15 and 20mm tall. This allows you to change retraction…
This is a simple ground/dirt anchor for vertical trellis vegetable stringing (in my case, tomatoes). Simply tie your string around the knob at the top, then screw the anchor into place near the base of your tomato plant (trying to avoid…
FR: Version française d'un modèle payant sur Cults du test “Si vous pouvez lire ceci, régler votre stringing” EN: French Version of "If You Can Read This - Fix Your Stringing" A paying model on Cults
Very tiny test print I designed to test the level of detail I could get from my settings. See attached pictures for all measurement details. This print tests dimensional accuracy, curves and spheres, holes, bridging,…
