Liczymy pasujące modele…
Floor stand for tower orientation of 2U equipment. I designed this for my APC SMT2200RM2U. Should fit 2200 and 3000 models of APC UPSes (or “schneider electric”). May fit other 2U UPSes and equipment. Be careful not to block any…
These parts are for an Echo SRM225 trimmer. It is the choke lever and the choke flap. These parts have been slightly modified from the OEM parts. You will need to remove the factory pieces completely. You will need a #8 x 0.5 inch machine…
Just to test placements of Items. Gives maybe a hands on. Your slicer might be busy for a while. Because it takes extreme long to print in original 1.6mm height, I added a version with 0.4 mm thickness. Saves a bit the time and the money.
The bumpers are to prevent the bottom of the battery bank from getting scratched up setting it on rough surfaces. They're slightly undersized on purpose to fit snugly and not slide around. The cover prevents dirt intrusion into the ports…
This adapter allows you to get every last drop of resin out of your cartridges. To use it let your cartridge sit at an angle to let all the left over resin flow to the top of the cartridge, then use a knife or saw to cut the lower corner…
Use standard Skateboard bearings, preferrably brand new, clean. Needs to be JB or Epoxy welded to a thick steel plate for accuracy with Dial Indicators. I wired the Rod in place so the stand could be as small as possible. You may not need…
A simple Bumper for the Storm2 Powerbank from Shargeek. Have fun with it and happy Print!! :)
The standard door latch has 2 locking positions (technically 3 positions total): Locking the door tightly closed Locking the door open slightly cracked Floating, unable to close at all This modification adds a third locking position for a…
Building Platforms Stacker for Formlabs' Form2 ( & Form1+) (one platform per material avoid cross contamination). STL & STEP files are available here. Empileur de Plateformes de Construction pour Form2 (& Form1+) de Formlabs (une…
Just startet out with my Honeycomb Storage Wall and designed some hooks, mount and holder for my items. This is just one more of them :D
A simple way to include more 80mm fans inside the SilverStone RM23-502-MINI
This bracket requires a Thermaltake PCI-E 4.0 Dual 90 Degree Riser Cable 400mmPCI-E 4.0 Dual 90 Degree Riser Cable 400mm The bracket comes in two halves and is bolted together using a single countersunk m4 bolt (or glued). The riser slot…
The base was built in methacrylate, the elevator in 3D printing and the sacrificial table to glue the MDF PCBs with double-sided tape.
An adapter designed to fit Ok_Cheesecake_8918’s “server rack cable management arm” onto a SilverStone RM23 rackmount cas Allows you to remove the top panel while keeping the arm in place. Design to be Used with à M4 Screw .
Building Platforms Stacker for Formlabs' Form2 ( & Form1+) (one platform per material avoid cross contamination). STL & STEP files are available here. Empileur de Plateformes de Construction pour Form2 (& Form1+) de Formlabs (une…
This is my cover for the Shargeek 100/Storm2 Power bank (Model: STM2-2) The first one is a full cover that has no design, except for a hole for the screen and the button underneath it. The second and third ones are "Wireframe Inspired"…
