Liczymy pasujące modele…
Gamer case for your BBC Micro Bit Features: Easy to print Easy to handle Allows access to all the board features You can attach the battery box in the back. https://www.prusaprinters.org/prints/20132-case-for-bbc-microbit Print…
This is a controller shaped case for the BBC Microbit with a detachable battery holder that fits the standard 2xAAA (JST-PH) battery pack for the Microbit. The original design for the controller case was done by Guillermo Melantoni…
Any feedback is welcome Because of the frequent use by young people it seemed smart to make a case to protect the Micro:bit against falls and damage. This is an easy snap-on case that keeps all functions of the Micro:bit working while…
Holder 32 4mm hex precision microbits compatible with Zack Freedman's Gridfinity organization system. There are lots of other similar holders our there, but most of them either included a slot for a screwdriver I don't own, were too big,…
You can fit the MicroBit Board alone or the "GAMER case for BBC MICROBIT" Download it here: https://www.prusaprinters.org/prints/20112-gamer-case-for-bbc-microbit It also has compartiments for: USB Cable Battery Print instructions No…
I have created multipurpose battery pack holder for BBC microbit. I have spent lots of time perfecting it. It can stand on its own, be clipped on lanyard or with use of velcro strap used as wearable. Now i am releasing it out in the wild.…
The Microbit v2 comes with a very clever cardboard battery holder that you have to fold. I replicated the original design and made a couple of variations, including the Animal (which loosely resembles a racoon). Important : this model has…
I have created multipurpose battery pack holder for BBC microbit. I have spent lots of time perfecting it. It can stand on its own, be clipped on lanyard or with use of velcro strap used as wearable. Now i am releasing it out in the wild.…
A simple, quick-to-print design, borne of the necessity to afford a modicum of protection to this hardworking educational tool in its travels to and from school. Plus, who wouldn't want a Micro:Bit on their fridge or whiteboard? Design…
microbit case with integrated breadboard. For small tinker projects or if you just want to quickly test something out. What you need in addition - a micro:bit GPIO Expansion Board I have also posted a version for the Raspberry 3 and 4.…
Microbio case in form of the aztec rain god Tlaloc
A tiny and low cost protector for the microbit V2/V2.2 I use in robotics classes. Contacts remain exposed for sliding into pin breakout board. Assembly: Start by sliding in the buttons and then push the snaps until click. For disassembly…
Remix of georgmierau's brilliant remix which is based on rayjizza’s model. My version allows the touch pins to be used.
The model is accurate enough to base case designs off of it, but is missing the large square on the back
Still a work in progress, works but needs some refinement. Visit our blog to see this and other projects we have completed https://realbaddad.com 3D Printed Fortnite Axes & Props - https://realbaddad.com/3d-printed-fortnight-axes-props/…
Since i've changed from a Wowstick to an electric screwdriver i wasn't happy that i couldn't use my bits anymore because they are microbit. With this adapter you can put your microbits onto your regular bitholder. For a good fitment i've…
i designed this microbit case to be used as a nametag. the rear compartment holds the batteries, the front is designed to display the microbit.
I've had this piece break on two of my Retro-Bit Saturn controllers at the same time. If your controller no longer responds to dpad input in at least one specific direction then this internal piece has probably broken. I made the part in…
This is a remix, the original design was made by @Kytor. Removed back storage for USB dongle. Added Skadis feet. Adjusted back to clear controller from the wall. Added Sega Saturn Logo.
Un piccolo gioco per dare concretezza alle lezioni di coding con Micro:bit. Buon lavoro a tutti! PS: è necessario impostare un cambio colore per poter avere il cerchio bianco intorno all'8 PPS: avevo finito il nero quindi versione…
As a teacher, the need for having a place for alle the things needed is nice. So I made a storage station for the Microbits. fits 20 microbits. compatible with v.1 and v.2
I was tired of having to put my microbits back in the Box or having them fall around my workspace when working on projects. After i saw a holder for the standard ¼" bits i designed my own version for the 4mm Version. The last two rows are…
Game controller for BBC Microbit. Needs some more work.
made to fit the microbit step counter project here→ https://makecode.microbit.org/projects/step-counter
I bought a cheap Ants Make AM-044 Micro:bit game controller for my students, but it was missing cover for the fragile electronics so i designed one on my own. This does not fully cover the device, leaving a space between to expose some of…
Depending on your printer and Microbit, you may need to scale the STL accordingly to get a good friction fit
Stand for micro bit in flower pot. Outer diameter for pipe 8 mm.
Now you can add your Microbit to your Prusament spool and use it as a race steering wheel I had to print my own Prusament spool since I don't have one empty. Here you can download the program to your Microbit…
I was looking for a cool design for my micro:bit on the Christmas tree and found Kitronik's ( https://kitronik.co.uk/blogs/resources/mipower-microbit-christmas-baubles ) page. Their perspex designs caught my eye. Since I don't have a…
This is a Gridfinity 2x2 holder for the Wiha 75992 27-piece microbit screwdriver set . I think that the handle has changed a few times based on reading the Amazon reviews. Mine is the yellow one that holds the bit in with a magnet. I made…
I created this little project as a way to avoid undesired interruptions at work. With the A button you can change the your state between "free" and "busy". You can also turn off the LED matrix display. With the B button you active a 20…
A circular and iconic case for microbit V2/V2.2 with snaps to grab on both sides. Use minimal support to print the small overhangs. Assembly: Start by putting the buttons through, and the snap over the sides of the board. You can use a…
This is a case for the BBC Microbit which can be 3d printed in 2 pieces in less than 1 hour. It can be used to attach the microbit to clothing either by a hook which clips onto a pocket or a hole where a safety pin can go in. The back…
Heat-Insert Nut *4 m3 screw *4
This block was designed to fit the Ks0308 keyestudio Motor Drive Breakout Board for micro bit and the BBC microbit.
SQ-ES126 and Wiha Go Box MicroBits Stand A stand for a Sequre ES126 electric screwdriver and the Wiha Go Box MicroBits Set. Description I have one of the ES126 small electric screwdrivers from Sequre. This model has more torque than the…
This is a low-cost and easy-to-program device that allows users with motor disabilities to use Morse code in order to type on a computer or mobile device. The built uses the Microbit's Bluetooth capabilities to send keystrokes to the…
Based on https://www.printables.com/model/511086-microbit-protective-case
I've enhanced my micro:bit movemotor kit by incorporating a clip designed for the front, ideal for attaching shields, weapons, and various accessories. Additionally, I've affixed LEGO blocks to the mount using glue, providing an easy and…
Microbit adapter for smars V4 Lite, you can find it here https://cults3d.com/en/3d-model/gadget/smars-v4-lite extra parts: shield https://s.click.aliexpress.com/e/_9zuxxn microbit https://s.click.aliexpress.com/e/_9HFrTJ Category: Robotics
A simple case for joystick module
You can to use cotton wool to fix micro:bit i case, rather than use glue or scaling down the size of the case.
This model only includes body and wheels and no instructions on how to use and setup. This model is only shelf model and final version will be available July 1st.
A simple display or wall mount for the wired Retrobit Legacy16 Game controller. I have split it in two parts so it prints with no support needed - and can be used both as a stand or a wall mount.
Modified this to remove the dongle in the back so make it closer to the board
L-Boxx mini Einlage für Wiha Microbits System 4mm mit Fächer zum Herausnehmen, es passen auch die Bits von Brightison Feinmechaniker Schraubenzieher Achtung! die Bithalter01 passen nicht in die Mulden, sie liegen bei mir nur oben auf
Robitornic Powerswitch Holder and Cover for the Reciver Box The Switch https://shop.robitronic.com/de/robitronic-elektronischer-schalter-r01612 the cover closes the hole from the manual switch the holder / cover fits on the buggy and…
https://makerworld.com/de/models/1712947-kurobit-the-monkey-fighter#profileId-1817805 Kurobit der Affen-Kämpfer 10 cm Eine detailreiche Figur im futuristischen Rüstungsstil, ausgestattet mit markanten Panzerplatten und Waffe. Trotz der…
The sensors from Seeed come in packages and end up all over the place. These two trays hold all of the sensors, connectors, the shield, alligator clips, microbit, and LED strip in one place that fits perfectly in the original box. One…
Carcasa para Microbit con el personale de Yoda. Ideal para la programación de la tarjeta Microbit como mascota interactiva.
This one is parametric and is done in OpenSCAD. I've also added some notches to make it clip into my screwdriver (Dnipro-M CSD-36X), but you can probably adjust parameters to your filament and printing process. There are also several…
I bought an Origin8 yesterday and I really hate having to keep up with dongles and adapters, so I made a stand to hold it all! Easy to print, just needs support for the name on the front. I sell these as well at…
Microbit set box for Stanley Mini 0,3 layer PETG MK3S+
Supercooler kleiner Bit-Dreher, den man immer brauchen kann - Danke an den Ersteller … da ich gerne mit Micro-Bits arbeite, hier noch ein entsprechender Adapter dafür … Der Adapter steht ca. 5mm über, damit man ihn auch leicht wieder…
Od OMG Robotics jsme si koupili jejich jezdítko Simple Car včetně joysticku na rozšiřující desce MB2. Rozšiřující deska má akumulátor přilepený oboustrannou páskou k desce, což se mi pro používání s dětmi moc nelíbílo. Tak jsem vytvořil…
This is a case for a micro:bit expansion board. These boards aren't precision-made, so yours may be slightly different. I'm providing step files for easy customization.
Hi all, This is origanaly uploaded for a competition for 3D printer hosted on My Mini Factory. https://www.myminifactory.com/pages/bbcmicrobit The Case.stl can be printed without support and must be done on its back- with the walls up The…
This is a case to hold the microbit and 2 audio jacks to allow a user with a disability to plug in their preferred switches and send keyboard commands to a connected computer via bluetooth. Build instructions for a case free version is…
Naším cílem bylo vytvořit ochranné obaly na pomůcku, kterou využíváme v kroužku robotiky a také ve výuce informatiky. Microbit je malý počítač s velkým srdcem, chceme jej chránit
Just the STL, OpenSCAD files for the parts used in a small robot cat along with the circuitpython code to get it moving. http://makerblock.com/2021/05/building-the-monocle-top-hat-cat-for-microbitvirtualconcert/
Transport box für die Robitronic Hobbywing programierkarte Dien box ist mit Magnet Deckel größe der Magneten 3x4mm
A simple way to connect a trailer to your BBC microbit car
This grid is designed to shield each LED element on the “ Kitronik ZIP Tile for BBC microbit ” Since components like capacitors are placed between the LEDs on this ZIP Tile, the grid is modeled to avoid them. This allows the grid to fit…
Vytvoř si funkční sonar pomocí 3D tisku a microbitu nebo dalších mikropočítačů. Projekt je velice jednoduchý a stačí ti k tomu pár základních periferií. Pokud se bojíš, že je projekt moc složitý, tak koukni k nám na web a zjisti, že je to…
C'est un support qui permet de ranger sa carte MicroBit et le boitier de piles sur son bureau afin de la programmer ou de la tester plus facilement grâce à l'inclinaison de la carte. Impression 3D (Creality Ender 3 v3 SE) PLA (Forshape…
Žáci si zkusí sami navrhnout způsob skladování dílů stavebnice, mohou vytvořit organizér do původní krabice, či navrhnout krabičku novou.
Fits the Wiha System 4 ESD Safe MicroBits Set, as well as an after-market micro-bit to 1/4" socket so I can use these micro bits with my other screwdrivers. You may optionally glue in a 6x3 magnet to hold the bit adapter in place.…
Pokud máte rozšíření MB2 OMG Robotics a joystick, tak si k němu můžete vytisknout kryt, který vám zpříjemní držení celého zařízení. K sestavení budete potřebovat šroubky M3x20 a matičky M3.
Pokud se ti valí periferie k microbitu na stole a kabely vedou všude, tak si vytiskni držák microbitu a periferií a udělej své aplikace trochu statičtější. Jsou dvě varianty, a to na stůl nebo pro zapíchnutí třeba do květináče, tak aby…
Hier ein Halter für das Wera Micro-Bit-System. Die Bits werden magnetisch auf ihrem Platz gehalten und im unteren Teil ist noch eine kleine Ablage integriert wo kleine Schrauben abgelegt und ebenfalls magnetisch festgehalten werden. So…
Supercooler kleiner Bit-Dreher, den man immer brauchen kann - Danke an den Ersteller … da ich gerne mit Micro-Bits arbeite, hier noch ein entsprechender Adapter dafür … Der Adapter steht ca. 5mm über, damit man ihn auch leicht wieder…
This is a case for a micro:bit expansion board. These boards aren't precision-made, so yours may be slightly different. I'm providing step files for easy customization.
This is a case to hold the microbit and 2 audio jacks to allow a user with a disability to plug in their preferred switches and send keyboard commands to a connected computer via bluetooth. Build instructions for a case free version is…
The sensors from Seeed come in packages and end up all over the place. These two trays hold all of the sensors, connectors, the shield, alligator clips, microbit, and LED strip in one place that fits perfectly in the original box. One…
Transport box für die Robitronic Hobbywing programierkarte Dien box ist mit Magnet Deckel größe der Magneten 3x4mm
Since i've changed from a Wowstick to an electric screwdriver i wasn't happy that i couldn't use my bits anymore because they are microbit. With this adapter you can put your microbits onto your regular bitholder. For a good fitment i've…
This is robo a cool robot with a thunderbolt logo at the front of his body with two articulating guns and four moveable legs. You will need to add supports when printing this model because there are harsh overhangs as the guns stick out.…
100x160mm sign, featuring a picture of an alien and text “Pursue Probity” Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my…
Layer filament changes and some supports. (May also need some sanding or filing) Needs to be split into bodies in the slicer and also scaled up. Made by someone idk on the Mekanism minecraft mod team
These are the files needed for ROBIT, a teaching platform for realtime embedded systems. The code can be found at github , more explanations in the portfolio . The circuit board is attached as a fritzing file (.fzz). The treasure chest…
