Liczymy pasujące modele…
For growing smaller plants like herbs, arugula, basil,… I use my designed foldable net cups which can be found here: https://www.printables.com/de/model/770952-hydroponic-rockwool-netcup-flat-foldable
A rockwool plug holder for 25x25x40 cubes like the ones available from Ebb och Flod: https://ebboflod.se/mediumkrukor/rockwool/sticklingkuber-25x25x40.html This is a new design that I made after IKEA discontinued the VÄXER plugs which I…
Printed in PETG with a 0.8mm nozzle and a layer height of 0.5mm (for speed), except the first two layers which use a layer height of 0.4mm (for proper dimensions) Each wall is two lines with a 0.8 nozzle. Each cell is 40x40mm The floor of…
seemed silly trying to cram a square peg into a round hole, also the 1.5" rockwool cubes seemed way overkill for my little kratky plants, so I came up with these netcups to fit a 1/4 and 1/8th of a 1.5" rockwool cube which I found cuts up…
Updates 10/8/23 - WORK IN PROGRESS and I intend to publish some updates in the coming months. Current models are absolutely functional, and I am using them to grow greens today. Just wanted to make some changes to fit better in my…
This is a tray designed to germinate seeds in 4*4*2cm rockwool supports. Print one tray, one insert, and either one (or both) of the lids - you probably want to start with the sealed one and move to the one with vents after a few days.…
Net cups I created for my new hydroponics experiment with Kratky method. They fit 1 inch (2,5 cm) Rockwell cubes. Print upside down with supports. I used 0.4 mm layer width so walls are 3 layers thick.
simple tray for 9 rockwool cubes , 4x4 cm (1.57x1.57 inch) with a trivet. There is space under the cubes to see if roots have formed and to protect the roots from the water. I recommend a wide brim because the corners will easily detach…
I like the idea of printing these things flat and fold the net cup with a locking mechanism for my hydroponic system. I can fit 8 cups on one print plate and it uses 0.8g of filament per cup. The bottom uses a simple “hook” which fits on…
Just a little project I did for learning Fusion360 1 tray holds 6 cells of 2"(50mm) cubes. The dome fits pretty snug but there should be enough tolerance for all sorts of printers Water tray 176x124.5mm Rockwool holder 156x104.5mm (Inner…
Gehrungslehre für Rockwool Rohrisolierung 22/20 Für 22/20 Isolierung = ( 22er Rohr und 2x20er Isolierung = 64mm Gesamtdurchmesser) Auf alle anderen Isolierungsgrößen skalierbar Anleitung: 1. Bis zur Mitte des zu isolierenden Rohres…
I make few models seedling tray for rockwool cube 4x4x4cm + Legs Enjoy !
A simple drainer for Grodan (or any other) 4x4 rockwool cubes that allows all water to drain out of the bottom of the cube, so that any excess water doesn't lead to damping off of your seedling. It also prevents the taproot from being…
A little Adapter for 2inch Netcup Hydro-,Aqua-,Aeroponic Systems. It enables the direct use of this Rockwool-holder: https://www.printables.com/model/65737-rockwool-cube-holder for easy growing from seed to finish. I designed that part…
The 3D-printed clip for a hydroponic system is designed to securely lock in rockwool cubes, providing an optimal environment for plant growth. It was made for Dani's Hydroponic 50mm tower…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
A pot for a hydroponic system to hold a rockwool cube. Designed towards the grodan SBS36 that I use. It fits snugg and tight so that the Plant doesnt fall sideways gaining laverage over the pot potentially destroying the pot. The bottom…
A pot for a single Rockwool cube Print Settings Printer Brand: RepRap Printer: Mendel Prusa Rafts: Doesn't Matter Supports: No Resolution: 0,2 Infill: 20% Notes: Printed with a 0.4mm nozzle. Wall thickness is 1.2mm to fit with nozzle.…
I use 27mm X 20mm diameter rock wool cylinder that I find here: https://www.amazon.fr/dp/B0B63P94P7?psc=1&ref=ppx_yo2ov_dt_b_product_details
Replacement tray to use your AeroGarden 3 hydroponic system with seed starter plugs. Instructions This part replaces the top of the bowl in a AeroGarden 3 hydroponic kit. I've made two versions of the tray. One holds up to 16 Grodan 1.5"…
4 inch and 6 inch Rockwool/Stonewool Grow Block Cover. The cover helps prevent Algae from growing on top of the block due to light… Print 2 pieces per block
There is 3 files: A big rockwool support you can fill with clay balls to avoid the rockwool to became greenish A cover for this rockwool support when he is empty A cover for the hole directly. This is made for the 10*10cm rockwool
2x4 frame (file 8a) as well as single cell option for the 1.5in / 40mm rock wool starter cubes. Allows your cubes to be in contact with heated seedling starter mat until roots protrude, and then second frame lifts 20mm to allow safe root…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
There is a seat the raises the cube off the floor. And a space between each cube to allow for better airflow. I've achieve faster rooting using these compared to dropping them in standard 6 pack seedling trays. PETG. I was able to print…
A sturdy 2-inch hydroponic net cup designed to hold a standard 1.5-inch rockwool cube. The square 38.8 mm pocket grips the cube so it doesn't spin or fall through, and the open slotted sides and bottomless design give roots plenty of room…
A compact, modular seedling nursery designed to start twelve plants for your hydroponic tower. Its 3×4 layout uses individually removable holders sized for 1.2-inch rockwool cubes, with open sides for root growth and finger tabs for easy…
Cheap rockwool alternative - Pool noodles. Cut pool noodle into 20mm-24mm sections, then cut a slit to fit plant stem into noodle. For smaller plants cut a section of the noodle out to better support a smaller stem size, as seen in video…
I made it from 9 slots to 4 on both the tray and the holders for the rockwool. Made another version from it to add labels with Nimbot D101 label machine and one that should fit generic machines. Printed it in Translucent PETG (Just…
