40 modeli
The last Metroid is in captivity, the Galaxy is at peace… This is our second fully 3D-printable articulated figure: Samus Aran, from the Metroid franchise of video games by Nintendo. The designer is Dany Sánchez , who is also behind…
-INCOMING DISTRESS SIGNAL- This bust statue of Samus Aran , from the Metroid series of video games, is easy and quick to 3D print. A great step to get used to OpenFigure3D models before going for the full articulated 3D printable figure,…
This model replaces the lower arm and hand of LUCKY 13 and can be printed upright without supports, though a raft is recommended. Remixed from Reticulum_Infirma64 's “Samus Aran's Arm Cannon” model: https://www.thingiverse.com/thing:4715334
Probably the coolest power suit around, here is Samus Aran in her metroid suit. Also included is an amiibo style base, with keys for easy assembly. The Base is intended for printing on an FDM printer at .2 layer height or less for best…
Newly infused with metroid DNA, here is Samus Aran in her fusion suit. Also included is an amiibo style base, with keys for easy assembly. The Base is intended for printing on an FDM printer at .2 layer height or less for best results. An…
This is a 1:2 articulated figure of Samus' Varia Suit from Metroid Prime 3: Corruption. The model is from the game, extracted with Metaforce, and can also be found at the Models Resource dot com. Most of these can be printed in a 200x200…
My take on the Varia suit helmet. This is a sixth scale helmet and not made to be wearable as is, but it should work scaling it up... There is a slot for a visor sheet but it's not optimized, feel free to remix and split it as needed
This is not my make, this was uploaded/made by WhizzerStudios, Dave Drollman Original text found on thingyverse: (I only uploaded Varia suit) "I finished this action figure about a year ago, and have finally uploaded it. I was in a bit of…
Articulated samus aran from metroid, uses tinkercad joints
Made a mod for Lucky 13 as Samus Aran from Metroid. For the Arm, Cannon, shin and foot parts, I used the parts of the Megaman model from @DrOperator. All printed good with PLA at 0.16 but if you can, print it with a SLA printer for more…
These are Extras & Items to enhance your Samus from Metroid OpenFigure3D. Included are: Charged energy shot, a ball of energy from the tip of Samus' cannon. Grappling beam, a jagged energy chain that lets Samus reach things at distance.…
A new Metroid figurine! This time its Dark Samus in her MP3:Corruption form. For this one I used the Smash Ultimate model (from The VG Resource website), and added joints attempting to conserve as much from the original object as…
This is a 1:2 scale replica of Samus' Arm cannon from the Metroid Prime games. The cannon is made up of several parts to emulate the way it morphs and shifts when selecting different beams. The light is an RGB LED lamp I gutted and…
The model is scaled up by 1000% from original and a cutout was made to hold an Amiibo. I also filled in a few spots around the three thrusters in the model to make printing easier. Print Settings Rafts: No Supports: Yes Filament: N/A PLA…
Samus Helmet Filled print it in 1 GO!
Can print printed wall decoration, coaster, keychain or used in another design. Add a filament swap at the start of the raised areas to add contrast.
To attach, follow the steps to attach the forearm for Dummy 13 (on Dummy 13's page)
This model is inspired by the Wiiu Smash Bros Samus. The helmet was made with Bambu AI image-to-model tool, and the shoulder and cannon was made by me in TinkerCAD. To use the shoulder pads, you must take off the shoulder armor plates on…
Modio designed version of armored Samus
Llavero giratorio con forma de S, inspirado en la tipografia de Metroid y del Nombre Samus Aran. S rotating keychain, inspired by the typography of Metroid and the Name Samus Aran
Źródło oznaczyło ten model jako treść 18+.
The Samus S logo. For hanging in a windooooooow, or on a wall.
Źródło oznaczyło ten model jako treść 18+.
Źródło oznaczyło ten model jako treść 18+.
Źródło oznaczyło ten model jako treść 18+.
This is a modified version of the top lid of collingall's GBA Consolizer shell, since a while ago I tossed out the idea of Samus themed shell. So here you go. Print all pieces facing down. If the pointy corners lift, try using a brim or…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x160mm in size You may print at higher layer heights below the Base Thickness of 0.4mm The Max allowed Thickness is 2.16mm and the Actual…
A cute bust of Samus Aran in Roman style. All my AI-created figurines are tested on a Prusa Core One, which guarantees a 100% printable model and a correct rendering! FR : Un sympathique buste de Samus Aran a la romaine. Toutes mes…
Modio designed version of armored Samus remix.
Detailed 3D printable Samus Aran Suit figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: https://www.patreon.com/Marjers…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x160mm in size You may print at higher layer heights below the Base Thickness of 0.4mm The Max allowed Thickness is 2.16mm and the Actual…
COMO ESTA ECHO POR IA TIENE DEFECTOS MANOS, PIES, OREJA, ETC (NO ES PERFECTO LA IA) TRATO DE QUE SALGA BIEN LA IA
COMO ESTA ECHO POR IA TIENE DEFECTOS MANOS, PIES, OREJA, ETC (NO ES PERFECTO LA IA) TRATO DE QUE SALGA BIEN LA IA
COMO ESTA ECHO POR IA TIENE DEFECTOS MANOS, PIES, OREJA, ETC (NO ES PERFECTO LA IA) TRATO DE QUE SALGA BIEN LA IA
COMO ESTA ECHO POR IA TIENE DEFECTOS MANOS, PIES, OREJA, ETC (NO ES PERFECTO LA IA) TRATO DE QUE SALGA BIEN LA IA
A new Metroid figurine! This time its Dark Samus in her MP3:Corruption form. For this one I used the Smash Ultimate model (from The VG Resource website), and added joints attempting to conserve as much from the original object as…
if you want NSFW versions join the club and text me
