Liczymy pasujące modele…
V2 is out!!! I apologize for the video quality and for the mess! Parts needed: bearings (10x) size: outer 19mm inner 6mm threaded rods with a diameter of 6mm and a length of 71mm batery box 4x AA motory:…
I built the Mini Warehouse for use with the remote controlled Mini-Skidi RC model that I remixed here: https://www.printables.com/model/567657-the-mini-skidi-rubber-remix. It became a play environment for young drivers. The warehouse was…
There is a PDF file giving the parts I used and some build notes. The OpenTx transmitter files and “sounds” are also included in a ZIP file. This is quite a challenging build due to its small size but great fun to operate. Only the parts…
If you have a problem, write to me. Tutorial coming soon This model can also be used with MINI SKIDI/Bobík V1 if you have V1, you do not need to print the models marked ORIGINAL. This excovator is fully functional and tested in 10 hours…
What you need for this project Mini Skidi (optional, but is recommended) MG90S micro servo (I got some for cheap on Amazon) https://www.amazon.com/dp/B09V5BR7J5?ref_=cm_sw_r_apin_ct_KVPM1GDWKYQ719Y7Q2XF&language=en_US&th=1 Supports: 0.4mm…
12-29-23 Tow hook and adapter to V1 12-30-23 Snow pusher 1-14-24 Full release All the grapple parts from the original can be used on my grapples this is the servo connector for my arms that the long version works great on both 2.0 and 3.0…
Drew up some more "realistic" looking tires for the mini skidi. Printed them with the same settings as the original. There is a left and a right due to the offset in the notches on the mini skidi hubs.
MiniSkidi Flip Cup Challenge Rules 1.) Cup must be printed as provided(No changing dimensions) and out of PLA. 2.) When recording attempt there must be a timer running in view of the camera for example a phone, stopwatch, computer e.t.c.…
By far the coolest RC printable I have done. Kudos to @ProfJohnny_823077 for all his efforts designing this awesome RC skid steer. Adding my personal touch to an already phenomenal model, I added a notch at the bottom of the motor cover,…
Just added a box to the rear door to add weights to help keep from tipping forward. Also added cat logo just because
longer arm to fit legos 43.2x22 tires and hubs
This is a 3-D printable, quick attach for professor boots, mini skidi I was able to print all of these parts with supports on with my Ender3. Just make sure that when you print the arm you do not have supports on the inside of it. It…
I modeled this model so I could transport things with my BOBÍK V2, so I modeled a trailer with a ramp so that it is possible to transport smaller vehicles. Parts needed for assembly: Screws 2X M4 30mm 1X M3 28mm 2X M6 (threaded rod) 135mm…
The CargoBox Challenge is a fun competition completed with your Mini Skidi built from this project. https://www.instructables.com/3D-Printed-RC-SkidSteer-V20/ My remix of the Mini Skidi is located at this location which is designed to use…
Its a glock to put on ytou skidi!
print lid horizontally
This remix of the MiniSkidis rear cover adds two hollow exhausts that not only make it look like an insect but also are suitable as antenna ducts for a radio controlled version. Additionally I added a compartment as others already have…
The quick wiring attachment plate by @Printoptiontwo enriches the usability of the MiniSkidi from ProfessorBoots by enabling the quick swap of different, wired attachments. As it is, the Dupont connector used for connecting attachments…
2 pin jst connector 2mm friction fit.
A better tire for the prof boots mini skidi (unless your using treads)
To print, import both arms into the slicer, then add a part to each selecting the text for the correct arm. The text will load in the right location & orientation. Text elements are 0.25mm thick so print on 0.2mm layer settings with just…
I loved the look of the motor cover by @Geekware but don't have an MMU so printing vertically would be very time consuming. And nearly certain to fail. Printing flat and sinking the handle for opening the cover would make it hard to open,…
Based on @lev's V4 Skidi, this part allows you to mount the 16340 battery holders in front of the PCB where the 9V would normally go. They battery holders are put in place and then a soldering iron or hot steel implement is used to…
I wanted to build my own controller for the proffessor boots MiniSkidi, and other projects. This controller runs on and ESP32 C3 board, Github files are here .
I really liked the cover made by @SD89_3029896, but I didn't want a logo or to leave it blank, so I added a grille. Fins shape is inspired by CAT D series skidsteers. It fits up to 12 wheel balancing weights
I wanted to build my own controller for the proffessor boots MiniSkidi, and other projects. This controller runs on and ESP32 C3 board, Github files are here .
The quick wiring attachment plate by @Printoptiontwo enriches the usability of the MiniSkidi from ProfessorBoots by enabling the quick swap of different, wired attachments. As it is, the Dupont connector used for connecting attachments…
Widened slightly to be closer to the width of the tracks. Removed the teeth for a smooth cutting edge and removed grapple holes.
If you have a problem, write to me. Tutorial coming soon This model can also be used with MINI SKIDI/Bobík V1 if you have V1, you do not need to print the models marked ORIGINAL. This excovator is fully functional and tested in 10 hours…
used gt2 80tooth mod for the drive belt used: https://www.amazon.com/dp/B0BZNVMGGB?product_details&th=1 Parametric pulley - lots of tooth profiles by droftarts on Thingiverse: https://www.thingiverse.com/thing:16627 and tinkercad to mod…
This is based on the excellent design work of ProfessorBoots who created the RC controlled Mini-Skidi, using a wifi-enabled ESP32. His original work is here: https://www.instructables.com/3D-Printed-RC-SkidSteer-V20/ The Rubber Remix was…
https://www.printables.com/model/721244-3d-printed-rc-skidsteer-v30 YOU NEED 2 EXTRA Track Tensioner Roller.STL FROM PROFESSOR BOOTS Assembly Slicer supports (WITHOUT ROLLERS) (WITH ROLLERS) Tools required: mini skidi tools to get…
Swap batteries faster and add counterweight with this rear compartment hatch battery holder! You will need battery tabs for this model. I ordered mine from Mouser:…
