Liczymy pasujące modele…
Here is a small pop filter for a Shure SM58 type microphone. --- It's probably not the best sounding one but it does the job, it's small, quick to print, easy to realise and in one piece. Update => The empty round version offers better…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
Mount (clip) for Shure SM58 and other compatible microphones. With 3/8-16" mount (for standard microphone stand) and 1/4-20" mount (for photo stands/tripods). Can be used with original screw and nut as well as any part can be used instead…
Shure sm57/58 Microphone Desk Clamp Stand + Headphone holder. Don't forget to print the screw that is a separate file.
These two chin mount sizes were designed to snap into place on the ASTARS SM5 helmet. They have a generic mount piece on the end to primarily suit the GoPro. I printed with a 0.4 nozzle, at 0.12mm 80% infill Print on an angle (see…
Transform your Shure SM58 into a Shure SM7B with 3D printing, and save around $300! The Shure SM58 has similar technical specs to the Shure SM7B; the main differences between the models are the pop filter and design. We can’t replicate…
The battery covers or cups on the wireless Shure SM58 easily crack and eventually break around the threads if you twist the cap on a little too tight. This started as a remix of pmcpajadan's battery cover but I decided to re-implement it…
This clamp is perfect for combining shure sm57 and other small diaphragm condenser mics and having them aligned. It is useful for hihats snares guitar amps recordings and much more!!!
This is the upper replacement part of a shure microphone holder. Printed with black PETG with support. The stl is a little bit messy, but slicer correct it when u load. top microphone hole diameter: 25mmm bottom microphone hole diameter:…
I've added fastening for a shure sm57 (and similars) to the original model.
This is a simple adapter to give your Shure SM57 (or one of its clones) a right-angle bend. It's great for miking snares, where the hi-hat normally gets in the way, and might be useful for miking amps and the like, depending on your mic…
A table top mic stand to keep your wireless microphones from rolling away. Designed to fit the Shure ULXD2/SM58 but likely still useful for microphones of a similar shape. I made this stand so we could have microphones on all of the…
A printable 1:1 model of the Shure SM58 microphone. Designed to help prototype a custom grip. Could also be a prop.
This is a quick print to make a small color-coded identification ring for multiple Shure SM58 microphones. It will only fit the wired version of the SM58; the wireless variants are larger, and other people have made identification rings…
I wanted to copy the Royer R121 and SM57 combo mic holder, but with the bigger body Sterling ST170. The opening for the ribbon mic is 32-35mm ish. I printed it in PETG at about 20% infill so it'd flex a bit. To attach it to a mic stand, I…
Designed to place microphones gently and in a specific order. I also stuck some self-adhesive foam rubber on the inside to dampen the noise. The connection between the modules is designed for 3x30mm steel dowel pins. CAD Model:…
This is a simple model that can be used for Shure SM58 (wireless) microphones or other similarly sized microphones. This allows the microphones to be placed on a table without risk for them rolling off. During printing, you can optionally…
I needed a means of identifying my microphones that would be subtile, yet still easily recognizable. I took a look at the SLXD2 mic and saw this space specifically between the SM58 grill and the microphone body. It had an unusual shape…
You have two options. The first is to print the frame and use your own thin foam between the rings. The second way is to print the rack and apply a pop filter from another microphone. Pop filter to Shure SM57 You need to print: 1x…
Battery Cover for Shure Wireless Mics Fits PGX and SM58
This is the SM57 body Original war broken, so i decided to measure and print Printing Material: PETG or ABS (recommendation); PLA (alternative) Layer Height: 0,16mm (recommendation) Orientation: On the Bottom Support: Base only Infill:…
To put the ring back in place, you will need to unscrew the grill, put the ring back in place, and screw the grill back in place. I stuck colored labels on the console with double-sided tape. Category: Gadgets
A tray that holds 6 Shure SM58 microphones so that they take up minimal space in the case drawer without flying around. It features a space for 19mm spike tape for labeling as well as slots to easily grab the mics.
Non stackable holder for 1 SM57 without a windscreen. I tried making it stackable but wall strength was an issue for the environment it would be deployed in. Feel free to remix and try to fix this issue!
This model needs to be printed in a flexible filament. The model shown in this post is printed in TPU with a Shore Hardness of 95A. It should also be printed with 100% infill. The mount can support the weight of a Shure SM57/8 when…
While the pouch that comes with the Shure SM57 is more than enough to protect it (and much more importantly, anything it comes in contact with), the official A2WS windscreen/pop filter isn't nearly as robust. This case snaps on to protect…
A tray that holds 4 Shure SM57 microphones so that they take up minimal space in the case drawer without flying around. It features a space for 19mm spike tape for labeling as well as slots to easily grab the mics.
Insert for SM57 based on gridfinity
A simple stand suitable for GHB SM50B baby monitors.
These are feet I designed for my Sliger SM570 which allows me to use 120mmx25mm case fans under the case. They allow the use of the stock hardware; stock lock ring nut can be removed from rubber feet easily. You can see from the photos…
The Linkup PCIE 5.0 riser cable is not compatible with the original bracket that comes with the Sliger SM580/SM570. The mounting holes do not line up. I decided to design my own bracket that will fit the Linkup riser cable. The holes to…
I designed these mic racks for colleagues in the music department at school. They are now installed in a music room and behind the stage in our auditorium. They are sized to fit Shure Sm58 mics, but when testing them others fit as well.…
Designed to fit the classic Shure aesthetic (reminiscent of the SM57), with technology inspired by the Neumann KMS 105 2-stage mesh pop filtering, making it even more effective at eliminating plosives without rolling off high frequencies…
I was printing and assembling BoByS' excellent "Simple Microphone Pop-Filter" but was lacking a way to clamp it onto my SM57 microphone. So I came up with a simple yet effective clamp that joins the two together. It's a fast and easy…
This design is a simple vertical holder for the legendary Shure SM58. It has a cutout an attached cable can be simply slid through. This is designed to fit onto a HSW (Honeycomb Storage Wall). I will provide different sizes for different…
License as per original design.
Works on Shure SM57 or the Pyle alternative. uses a M5 Screw to hold a pop filter
Included one STL file. Prints without supports.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/025DkRYMTla Category: 3D Printing
Bushing-type adapter to make the cheap no-name "spider" shock mount (mine has a diameter of approx. 45mm) tightly hold a Shure SM58 shaped mic like the Behringer XM8500. Designed in Dune3D , d3ddoc source attached in the zip. Print with…
A bracket to hang an SM58 with 1/8" paracord.
This sleeve helps secure an SM58 or other similarly shaped microphone into the slot for a desk-mounted digital microscope stand. The model is designed specifically for stands which are compatible with cheaper microscopes you may find on…
Replaces Ring Mount_v1 from the original file
A protective shell for an A2WS windscreen on a Shure SM57 microphone (just like the US president has used since 1965!). It prevents the windscreen from being crushed and deformed in storage or transport. The groove in the handle part is…
The Linkup PCIE 5.0 riser cable is not compatible with the original bracket that comes with the Sliger SM580/SM570. The mounting holes do not line up. I decided to design my own bracket that will fit the Linkup riser cable. The holes to…
