Liczymy pasujące modele…
Hello friends from all over the world :) This is a simple smartphone stand for cases, when you don't want to keep it in your hands while sitting at the table and would like to have a more ergonomic angle of view. For example when you're…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
The holder has a capacity of up to six devices, with a width of up to 2.1 cm. The power supply in the base can have dimensions of up to 9.9 x 7 x 2.7 cm (L x W x H), as it is the case for the Anker PowerPort 6, which I am currently using.…
Wydruk około 3,50 €–4,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holder for postcards, small booklets, smartphones, etc. or even printing sheets (works!). Too small? Simply scale it up! Small version of my other smartphone holder with charging station I recommend printing it lying on one's side with…
Wydruk około 2,33 €–2,84 € nettoWstępna wycena jednego wariantu
Recently I designed a very rugged Tablet Stand for a Tradeshow booth that used quite a bit of unique hardware. After posting the design on Reddit and getting feedback, I decided to try and duplicate the design without using any hardware…
This project combines concepts from both the marvelous Modular Mounting System by HeyVye (on Thingiverse), the innovative Tripod Phone Stand by DieZopfe, and my own designs. I used the GoPro compatibility of the arms from the system from…
I really enjoyed Sneaks' wonderfully designed Adjustable Stand and how well it works for tablets. Wanting a smaller version that fits for my phone, I scaled down the parts, removed material from the bases, and slightly modified the hooks.…
This is my horizontal "widescreen" HoloBox for Smartphones, based on Pepper's ghost illusion technique. Superb for advertising stuff! Very easy build! Print out the two halves snap them together (they have snap-joints). Slide in the…
There are some usb-c dust protectors on printables but they were too bulky or too shaky for me. That's why I designed my own protection for my smartphone with a Pitaka protective cover. if you need any adoption or change let me know :-)…
Just designed my own vertical Holobox for Smartphones, based on Pepper's ghost illusion technique. Superb for advertising stuff! Slide in the acrylic glass sheet and put your smartphone on the top. I also made a “horizontal” version check…
I designed a sturdy version for bigger phones, the mesurements are for a Samsung Galaxy A70.
slimer, better fit and easier to remove Improvment to my earlier design: https://www.printables.com/de/model/783667-usb-c-dust-cover-for-android-smartphones-with-ultr There are some usb-c dust protectors on printables but they were too…
El soporte para smartphones más práctico, rápido de imprimir y portable que jamás hayas visto!!! MiNemo es un soporte para teléfono celular o smartphone portable. Básicamente, un accesorio para celular que mantiene al teléfono en una…
Hier ein Höhen- und Neigungsverstellbarer Handy- und Tablethalter. Den Knopf zweimal drucken. Es werden zwei M5-Inserts und 2 M5x10 mm Schrauben benötigt. Gedruckt mit PLA, 4 Wandlinien und 25%-50% Infill. Wer den Sockel schwerer möchte,…
Universal binoculars adapter for smartphones
Original: https://www.printables.com/model/834159-tilt-phone-stand-v30 Update : The original model was created by Matthew Ghost (the files on printables were deleted by the author). The original still exists in makerworld profile:…
Printing orientation: Ideally print the mount standing upright. This ensures maximum of strength for the cold shoe mount. When seeing the POP4 and reading about the standalone scanning support with the app or screen mirroring while…
ASTROTRACKER [EDIT] PARTS LIST at the BOTTOM [EDIT] GET BETTER - LOOK FURTHER Todays Smartphones are getting more powerful than some early DSLRs - and so the time for Smartphone Astrophotography has come. I love the night skies, but…
Handyhalter / Smartphonestand
After Snowden you maybe just want to make sure not three letter agency watches you. Needs some double-sided adhesive tape which sticks well enough to the surface of your phone or another kind of glue to put it there. Works similar as…
A cheap and effective method for taking photos of Coomassie/silver-stained SDS-PAGE gels is to use a light box and a cardboard box with a hole cut out from the bottom. It's like a home-made gel doc just for Coomassie/silver-stained gels.…
Solid, adjustable and taking a minimal amount of space, this stand can follow everywhere you go. Supports smartphone and tablet. Print it flat as it is without support . 0.2 layer or below recommended
The same as the parent model but with the left wing increased to support sizes of modern smartphones.
Description: Print your own handy Car Vent Holder for smartphones! Designed to be tough, use ASA or ABS filament for durability in changing car temperatures. I printed mine with 15% infill for a good balance. Easy to Use: Snap it On:…
Mini bedside storage box for your smartphone and other stuff. I added a hole on the floor to put your charging cable through, when not used you can put it in the small slid at the side to prevent it from sliding out. I included several…
This is a simple Stand for Smartphones. I needed a stand for my smartphone and created one. The problem with many other stands was that my iphone didn't fit in them with the case on. This bothered me and gave me the idea for this stand.…
This model was redesigned for a colleague at work who has 2 smartphones. One for work and 1 personal phone. She wanted it to be more organized on her desk, including a stand for her headphone. The model was printed in PLA with 15% infill…
Heart Keychain Smartphonestand / Herz Schlüsselanhänger Handy Ständer in 2 Neigungen und als Anhänger ohne Halter.
FOR VW CADDY 5 *** FOR VW CADDY 5 *** FOR VW CADDY 5 *** FOR VW CADDY 5 snap on mount for the air vents below the central screen for smart phones or other devices with a HR mount system. I printed mine with PETG with 4 perimeters and 25%…
I printed out in black PLA Materio3D material witout supports.
Intended for adding fins to IKEA Skadis parametric pegboard tray so you can charge smartphones and other devices on it… or you can just use it by itself to hold devices in a vertical manner as well… For enhancing…
This is a sound amplifier for all common Smartphones. As you can see on the pictures, I had to print several parts (3 in total) becouse of the limitations with the Prusa Mini and then glue them together. But hey, this little printer is…
Simple and usefull minimalistic smartphonestand. No supports print. Take a look to my other models and like them.
Für das bekannte HR Richter-Adaptersystem ist dieser Magsafe-Smartphone-Halter. Hält ein S25 Ultra sicher fest und lädt es dabei auf. Bei mir sitzt der Richter-Anschluss auf einem Schwanenhals. Damit ist die Ausrichtung optimal möglich.…
Reworked Skycontroller mount for smartphones. Using it with Xiaomi Mi Max 2. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.2 Infill: 10 Filament: Devil PETG Category: R/C Vehicles
With this tripod holder you can easily use any smartphone or small tablet on a tripod with hama compatible 40x40 mm base plate. You can attach the phone with its back or with its display to three small suction cups. You need in addition:…
It's a foldable smartphone stand. You can 3D print it in one go using a 3D printer (probably). The filament used is eSun
Printer used: Ultimaker S7 Print settings: 0.2mm, and set all other general settings as per the ABS material. Print material: ABS
Yet another QS wireless charger for under-table mount. Using those mounts for our Samsung S8, S9 smartphones in the Spigen cases. (previously was using more than 2.5 years https://www.thingiverse.com/thing:3797023 , but now decided to…
My daughter needed a stand for her smartphone while she was dancing, so I made this simple holder for her. I added a model with a 67° angle. The original one is approximately 81°.
These are files for every letter of the alphabet, so you can surprise every one of your family with his or hers individual smartphone- or tabletstand. Sketchup2017 file included, if you want to change something.
Hello everyone! I’m excited to share my passive smartphone speaker, modeled in Tinkercad! After chatting with a few coworkers about practical 3D designs, I decided to create a simple, easy-to-print Minimalist Passive Smartphone Speaker .…
My daughter needed a stand for her smartphone while she was dancing, so I made this simple holder for her. I added a model with a 67° angle. The original one is approximately 81°.
The model prints with minimal support that’s easy to remove. I printed it in PLA and haven’t tested other filaments, but
BOOM | Speaker Box for Smartphones Want to buy a physical 3D print of this product? Head to Trajann online store . Become the king of the party with BOOM, my eye-catching smartphone speaker box and its outrageously cool curves. 2 design…
![[mod] TILT PHONE STAND V3.0 for large smartphones](https://media.printables.com/media/prints/881891/images/6760618_31e68388-1e8a-4559-aa14-ecd5f92f42dd_00ed72cb-d05e-43c5-871d-bd4b42c8c092/20240516_172543.jpg)
