Liczymy pasujące modele…
Not the easiest print, there is very little contact with the build plate. Brim recommended (can work without) 0.2mm Layer height 6 walls/perimeters for max strength PLA/PETG
Pegboard holder for CMH caliper piston spreaders
Remix of the amazing wallet by Mike (itself a remix). I only modified the magnet holes to fit my existing magnets of 5x2mm. Please download all remaining parts from the original model.
A VERY simple spreader … Basically, I was looking for a little piece of plastic that I could use to spread glue. Since it is covered in glue after use, I didn't want to bother with cleaning it and be able to trash it. So it had to be…
Fits Glue Spreader Remix with Bevel by Jordan K (printed at 150% of original size). Glue Spreader Remix with Bevel by Jordan K | Download free STL model | Printables.com Printed in PETG .2mm 2 walls, 50% infill in about 40 minutes on an…
This actually ended up really useful, if grass seed wasn't so expensive I'd be using it all the time because it really works well! Long story short, I needed to spread some grass seed so I designed and 3D printed one (well mostly printed,…
Not the easiest print, there is very little contact with the build plate. Brim recommended (can work without) 0.2mm Layer height 6 walls/perimeters for max strength PLA/PETG
Tool to keeps the brake pads apart for easier rear wheel changes. Works with J Juan rear caliper of the Ohvale GP0 160 et GP2190. Push the caliper back and you can insert the tool to hold the brake pads apart. This prevents the pads from…
A tripod spreader arm/leg stabilizer designed to match the other legs on a Canon Deluxe 200 Tripod. I created this after finding one for 5 bucks and decided I'd finally use my limited knowledge of CAD.
A 7‑cm aerated‑concrete adhesive comb designed for evenly distributing thin‑bed mortar when laying cellular concrete blocks. The tool features a straight handle and a notched edge that creates consistent adhesive ridges, ensuring optimal…
Can be printed laying down or upright, although mine struggled with the upright.
I designed this customizable spreader to provide rock-solid stability for any tripod, regardless of brand. How to Customize: This model is fully parametric in Fusion 360 . To adapt it to your gear, open the "Change Parameters" menu and…
With just 12g of filament and 20 min you get a neat mini pad with spreader and scraper for your woodworking gluing.
A quick job creating a two-part mixing cup for various tasks when paper or Styrofoam will not handle the job. Use it to mix 2-part epoxy or resin, paint, or anything you can imagine. This is a great end-of-spool print; when you need one,…
A simple and practical holder designed for safe storage and organization of DDR4 DIMM modules without heatspreaders. This model securely holds up to 4 RAM sticks and is specifically sized for standard bare PCB modules, ensuring a tight…
A simple and practical holder designed for safe storage and organization of DDR4 DIMM modules. This model securely holds up to 4 RAM sticks and is compatible with modules both with and without heatspreaders. The design keeps the modules…
just needed the original model to be a little longer to speed up application.
Der Erste Funktionaler RC Streuwagen in Maßstab 1/16 und 1/14,5 zum Selbstdrucken (ohne Einschmelzgewinde) Der R3D-2300 ist ein funktionaler RC Streuwagen für den 3D Druck und eignet sich ideal als RC Streuer für Salz, Sand oder Dünger.…
Needed a cleaner design. The spreader width is slightly adapted for any chosen tooth size to accommodate only whole teeth. The provided stls measure roughly 100x60 mm. The parametric Fusion source file is now also available.
I made these 53 mm external jaws to fit bowls I made with the Nova chuck with standard jaws on the SC1 so I could finish or post-work the bottoms of bowls more easily. The SC1 is so small (51 mm diameter) it is not in the way when…
I used blue PLA at 0.3mm layers and 15% support cubic infill. Designed for a surgical glove size 9 hand, or a medium nitrile glove-sized hand.
Use it to spread salt outside in the winter time. 1/12/17 Update: Customizable.stl is a version with no holes for those who want to make their own holes. Use a drill or your 3d modelling software of choice. Just make sure your holes fit…
This leg spreader for the RT90C tripod is designed to work in conjunction with the ZWO PE200 pier extension. It consists of two parts: the spreader and a bracket for a M10 hex bolt which prevents the bolt from spinning and allows for easy…
I built an STL based on the VanDoren spreader bar concept. This works with any cord-based neckstrap to keep pressure off the sides of your neck. Printing at 100% should be fine but feel free to enlarge or reduce as desired. Print Settings…
Manure Spreader - 1:16th Scale Uses M2 Screws and 6.4mm diameter x 138mm(1/4in diameter x 5-7/16in) rod for axle 1.75mm TPU can be used for hydraulic hoses
Manure Spreader - 1:16th Scale Uses M2 Screws and 6.4mm diameter x 138mm(1/4in diameter x 5-7/16in) rod for axle 1.75mm TPU can be used for hydraulic hoses
Applying glue evenly is crucial for strong and durable joints. The 3D printed glue spreader is designed to help you achieve a uniform application of glue, ensuring your joints are as strong as possible. Its ergonomic design makes it…
Spatula handle/ trowel or spreader i don't know what's it called, but here it is. Hight. 100mm Wide. 150mm Thooth. 2mm
Just a simple short print to spread apart the light stems. General print settings. For outside use ABS, ASA, or PETG would be better, but it takes little time to replace in PLA if damaged.
I occasionally wash my OzArmour bee suits. I remove the hat “spreader bar” to prevent damage before putting the suit in the washing machine. I have been known to lose the spreader bar from time to time before putting it back in the suit.…
After trying to buy a replacement spreader/center tray from Celestron and failing, I modeled a replacement and printed one to see how it worked. Perhaps I went overboard on everything (8 walls, 8 top/bottom shells, 60% gyroid infill,…
Pegboard holder for CMH caliper piston spreaders
HARDWARE REQUIRED: 4 - 6 x (M5 x 20 bolt + nut) GENERAL PRINT SETTINGS: I'd prefer you use the 3MF files provided, they have all the print settings I used to get these working. Please print load-bearing parts one at a time to help layer…
GER: Siehe Unterschiede. Genau so drucken wie den anderen Spreader, allerdings müssen Supports aktiviert sein. ENG: See differences. Print in the same way as the other spreader, but supports must be activated.
For whatever reason, I couldn't really find any good models online for putty knives or plastic spreaders, so I made this quickly in Fusion 360. I specifically needed this to spread caulk on a drop cloth to make a battle mat for our DND…
Refer to the original model for more infos. Modified Spreader Bars: Sizes range from 143-402mm for the version without the middle hole and 175-443mm for the one with the middle hole. 3 Units larger and shorter than the original one, with…
I printed these with ABS. Assembly with bolts. Model is split into three parts in order for it to fit on a 256x256mm hot plate. Four or five sets should be enough. Fusion 360 model is provided for tuning.
Cup design choices: Rounded edges just like the stick Rounded top to keep the mix inside Outside lip to catch accidental spills 2 handles for fingers to hold the cup without touching epoxy Default print settings are ok Category: Tools
Part designed to be placed on top-shroud above the spreaders. It will spin freely and prevent the sail from touching the spreaders. Desinged for 6mm shrouds, but you can scale it as you like, also adjust screws to bigger size. Print from…
Remix of the amazing wallet by Mike (itself a remix). I only modified the magnet holes to fit my existing magnets of 5x2mm. Please download all remaining parts from the original model.
This item holds the wheel on with a screw through it, similar to a drywall anchor, just larger in size. The expandable portion is precisely 11MM in diameter and 12MM in length from the flange face. Printed on a Creatily K1C out of PETG.…
STL only from smal version, for wider use the f3d file the modify. On a Prusa mk3s print the original stl bar from SnapbackDigital.
A VERY simple spreader … Basically, I was looking for a little piece of plastic that I could use to spread glue. Since it is covered in glue after use, I didn't want to bother with cleaning it and be able to trash it. So it had to be…
very Polish spreader, make friends with Poles on the construction site. Tested on field!
I was tired of spreading seeds and then having to separate them after they grew. So, I designed this useful seed spreader. It’s very simple to use: place your seeds on the opposite side of the hole, tap the spreader with your finger, and…
My Scott Spreader twist lock broke where the trigger wire attaches to the base. This is a replacement for it. I screwed a course screw into it and was able to finish the yard. I have no long term testing on this fix to see if it will…
I believe I printed top down I printed with ASA and have been using it for about 1 season so far with good results.
Upon printing the first version, I noticed that the wall thickness was very thin. Be very careful removing the supports. If you have time to spare, Scotts support is very helpful and would easily replace this part for free, I just…
Badminton racket load spreader adapter for Gamma Progression II 200 Hold and secure the racket, reduce side movement when pulling cross string print with PETG
Fits Glue Spreader Remix with Bevel by Jordan K (printed at 150% of original size). Glue Spreader Remix with Bevel by Jordan K | Download free STL model | Printables.com Printed in PETG .2mm 2 walls, 50% infill in about 40 minutes on an…
when you just need some extra centimeters. also print the extra bolt insert.
Should be plug n' play. Model printed on a Bambu Lab X1C printer in org. PLA. Worked fine. Note: If you want long lasting spare-part print in Nylon preferable PA6-CF. PLA is not UV resistant.
Spreader for various kinds of glue, primarily for wood glue. Printed with TPU for more flexibility and ease of use.
here's a simple thermal paste spatula for your CPUs. 40mm blade for AM4, AM5, LGA1700, graphics card, etc. I recommend printing in thin layers and/or slowly to achieve a nice paste surface. Print with any rigid filament. No supports…
Hinge pin door stops have the potential of creating holes in hollow core residential doors. I was worried kids playing with the doors would cause the door stop to punch a hole in the door so I created a load spreader. This should fit on…
Don't forget mouse ears when printing. About 50 g in PETG. 3 pcs will fit on X1C bed. Mine printed in about 2h 15m with 0.75 line width (using 0.4 nozzle)
Wedge to press disc brake caliper pistons back into the caliper body during service. Print two, use them in a pair. Insert from opposite sides of the caliper, push them together, then use the finger holes to remove them. Quick and easy,…
These little wedge spreaders -now 50% littler!- will help you keep the calipers of your disc brake system apart when you take your wheel off, and when not helping you do that they'll clip together to store neatly and efficiently wherever…
Tired of wrestling with your book when you just want to read hands-free? I designed a print-in-place finger ring that spreads the pages open wide while staying super comfortable to use. ✅ Print-in-place – no assembly needed ✅ Minimal…
CrabLeg's original file had a few minor errors in the door file. The diagonal rails on each side were protruding down through the bottom, and one of the rails protruded through the locking mechanism. I simply removed those protruding…
Design Concept The bike brake pads spreader is designed for cyclists who frequently need to maintain or adjust their bike's braking systems. Its bright color ensures that it's easily visible and not easily misplaced among other tools.…
This actually ended up really useful, if grass seed wasn't so expensive I'd be using it all the time because it really works well! Long story short, I needed to spread some grass seed so I designed and 3D printed one (well mostly printed,…
Thinned down the back part without sacrificing room in the coin stash. Mostly achieved by halving the thickness of the wall between the credit cards and the cash storage. The entire back of the wallet is now 0.8mm thinner and the cash…
Simple sprung spacer for when not using the full card capacity of this wallet: https://www.printables.com/model/796303-pop-up-credit-card-wallet-spreader-with-coincash-s Helps cards eject out consistently and rattle less when stored away.…
Henk's spreader is awesome, but the big hole in the lid was letting stuff fall out when I didn't want it to. Rather than make 3 lid options I figured I'd just do this and you can slice out only the holes you need with a utility knife.
Had one of the springy parts of the "middle-section" break and noticed it was designed with sharp 90 degree cuts at the weakest point(which is where it snapped). So I added fillets to hopefully improve longevity of the part. I also cut a…
These holders for 2 or 3 Bonne Maman jam jars are specially designed to prevent the jars from knocking against each other when opening or closing the refrigerator door. To suit all refrigerators, two models are available for two or three…
Decided to place the spreaders and tube housing on one bed. Made the tube holders longer so you have less strain on your prints. PETG will work best for this. Hope you have fun and original design goes to DL2MAN.
Spare parts for the "Rauch" fertilizer spreader models ZS, ZSA, and ZSN (others may be compatible as well)
Spare parts for the "Rauch" fertilizer spreader model ZSB (others may be compatible as well)
Depending on orientation and printer capabilities this may require a small amount of sanding to ensure no “rough” edges (nothing even close to what it would take to cut a bridge line. Please drop a make or comment so this design can…
1.2mm thick. Notches are 2mm 3mm 6mm and 6x3mm. Enjoy 8mm hole for hanging.
moves plow and salt controls to cupholder. more eurgonomic
Look at the other models in my profile. This part is the final combination of bird seed spreader and the multi-part Mix & Match Bird Feeder from thingiverse (https://www.thingiverse.com/thing:1678790 ), and this replaces the base or…
A versatile spreader designed for salt, seeds, and other granular materials. 🔄 Includes 6 interchangeable lids — 5 with different hole patterns + 1 fully closed lid 🌱 Perfect for planting grass, distributing seeds, or salting icy paths 👌…
easy to print Disposable Scraper or Spreader Straight Edge
easy to print Disposable Scraper or Spreader R500 Curve
easy to print Disposable Scraper or Spreader Narrow
Tool to keeps the brake pads apart for easier rear wheel changes. Works with J Juan rear caliper of the Ohvale GP0 160 et GP2190. Push the caliper back and you can insert the tool to hold the brake pads apart. This prevents the pads from…
simple glue application tool. small enough to consume the last bits of a filament at just under 1g per tool. very useful for spreading contact adhesive. The "teeth" will not be as sharp or pronounced once printed, this is intentional. It…
Spatulas, Scrapers, and Thermal paste spreaders had to remix since most of the original files where non-manifold and didn't have the numbers on them.
A tripod spreader arm/leg stabilizer designed to match the other legs on a Canon Deluxe 200 Tripod. I created this after finding one for 5 bucks and decided I'd finally use my limited knowledge of CAD.
Spreader arms for my Kossel wire/cable frame brace kit here: https://www.thingiverse.com/thing:2941886 The original brace kit does wonders for frame rigidity, but comes at the price of some of the printable volume. I racked my brain for a…
I could not find a model I liked to download for free so I made my own and thought I would also share it for free. YOU MAY WANT TO SIZE DOWN TO 75%, I have to on my computer but when I open it on my tablet I do not, so it all depends on…
A set of six spreader plates for smooth and consistent silicone finishing. Three plates feature concave radii (fine, standard, large) for common inner corners and joints. One plate has convex radii for outer corners, and two plates are…
I've included STL, STEP and Fusion 360 files if you would like to edit. 6mm x 6mm. I printed in PETG but would work in most materials. 0.3mm layer height
A 7‑cm aerated‑concrete adhesive comb designed for evenly distributing thin‑bed mortar when laying cellular concrete blocks. The tool features a straight handle and a notched edge that creates consistent adhesive ridges, ensuring optimal…
Can be printed laying down or upright, although mine struggled with the upright.
I designed this customizable spreader to provide rock-solid stability for any tripod, regardless of brand. How to Customize: This model is fully parametric in Fusion 360 . To adapt it to your gear, open the "Change Parameters" menu and…
Fully compatible with FDM printers, NORMAL SUPPORT REQUIRED for little bridges
