Liczymy pasujące modele…
Custom Front Wing and Rear Wing for Traxxas 2WD ONLY vehicles Provides adjustable downforce for speedruns! This is a pair of front and rear wings that have been designed to give adjustable amounts of downforce while producing very little…
These wings are meant for Traxxas 2WD models only. (NOT the rustler 4x4 or slash 4x4) Pls traxxas lawyers do not take this down again, this is a custom NON-TRAXXAS part.. Front wing installation: The front wing comes in two parts: the…
** Warning: This is a complex and heavy mod for your RC truck. The increased weight will increase the wear and risk of vehicle breakage.** Materials Used PETG - 2kg White (Cab, Bed, latches) - 1kg Black (Frame, Bumper, Tail light frames,…
I printed this out of PETG the proto type was done out of PLA but cracked easily. All infill was done with 40% gyroid. I used 3 supports with long screws that run the full length. When using these on the plow it self you will have to…
A mounting solution for the Hobbywing Max10 SCT in a Traxxas Stampede 4x4 with the stock chassis. This design has 3 parts; a base plate, a step (to keep things level) and then a holder that keeps the ESC and switch in place. 2 x M3 6mm…
Quick'n'dirty model because I do not have the patience to do fiddly geometric cutting myself, heh. Unscaled size is 55x119x4mm, which is to scale with the anime on me (a ~5'9" adult). I strongly recommend using the ironing setting in Cura…
IF you lost the part that holds in the battery here is the file to print a new one
Didn't have the shield for my Nerf Stampede so I modeled a printable version using pictures and measurements that I found online.
Currently building a modified OpenRC F1 to go real fast, using an old RC Car (Traxxas Stampede) as Donor for now. Required a different mount for the Trans/Diff/Engine.
Printed at 5mm tall, scale the width and height to your jacket
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
I designed this mount for the SkyRC GSM020 Performance Analyzer to fit the BL-2s Stampede right on the top of the steering servo. It may also work with the Traxxas Hoss 4x4 since they share the same chassis, TRX9022. This mod is non…
An adapter that allows you to mount an FrSky X8R reciever to the Taranis QX7 remote to the Traxxas stampede RC car. This includes spaces for antenna and pwm connections.
A fore-grip for the Nerf Stampede remixed from the Nerf Stryfe Foregrip MK2 by Darkstar77 to better fit the bottom rail of the Nerf Stampede
Replacement ESC holder for Traxxas stampede with Titan 12T brushed motor. Allows for direct mounting to original traxxas esc mount on stampede.
Nerf Stampede Picatinny Rails Description : Picatinny adapters for a foregrip, optic, and side rails on the Nerf Stampede Materials : 3x M3 washer 5x M2.6x16mm self-tapping screws Printer Settings : At least 4 walls, 25% gyroid infill…
This is a model that you can insert into the stock barrel of the stampede, and it will push the dart into the barrel you can install. print at 0.2 layer hight you need a 7 ID 11 OD mm O-Ring you need a 13 ID 16 OD mm barrel. (you can also…
there are sand, snow, or mud tires for the traxxas stampede. they work great and due to the honeycomb like structure inside they do not ballon like the original traxxas tire. they should work on the slash and rustler with some…
This mount for the Traxxas Stampede puts the SkyRC GSM020 GPS under the rear 'bed' to keep it out of the way. Quick and easy print (about an hour). This fits the stock rear body mounts. You'll need: 2 x M3x20mm cap head bolts (18mm also…
Current test model https://www.reddit.com/r/nerfhomemades/comments/1lqwecw/can_somebody_makefind_a_3d_printed_nerf_stampede/
there are sand, snow, or mud tires for the traxxas stampede. they work great and due to the honeycomb like structure inside they do not ballon like the original traxxas tire. they should work on the slash and rustler with some…
the back hub of my car broke and I am too cheap to buy a new one. so i designed this. this hub has been designed to be printed on its face and to have the bearings pressed into it with your thumb. the hub should be printed out of PETG and…
this is an updated version of the original rear hub. the way this one works is it is printed out of three parts. the last two photos in the gallery is of how they should be oriented in the slicer. the amount of walls should be set to 12,…
A custom holder to hold a Goolrc 60a esc that screws into the four screw holes in front of the rear shock tower in the chassis, it is a snug fit do it won't fall out. the little slots in the side are for a zip tie to go around and hold…
Vash's super cool gun! Its sized for earings which I resin printed for a friend, but it is more than detailed enough to scale up for a full sized prop
this is the battery cover for the traxxas stampede 1/10 scale 4x4 R/C car. Print instructions Unassociated tags: R/C Category: R/C Vehicles
Traxxas rear uprights. Stock look with a little more strength added in with rounds. I haven't printed this yet, just measured and drew it up. So it may need a few fixes in the future. Print Settings Printer: Voxelab Aquila X2 Rafts: Yes…
I've been researching cycle control for the Nerf Stampede, and I understand that it's not too uncommon to trim the control plate to help manage runaway by adding dwell. It's kinda hard to “un-cut” something, so here's the replacement I…
