Liczymy pasujące modele…
Mount your Startech USB Hub securely! Mounts Startech ST4202USB USB 2.0 Hub, giving you open access to cabling on both sides (DC power barrel, USB-B & the four USB ports on the hub). Can screw right into a rack like…
I designed these in onshape cad with parametric variables in mind these are 30mm wide by 45mm long for 6x3mm magnets but I also designed the untested 90mm length. I decided I like the look of 45mm segments better and the weight of cable…
Lets you replace the 80 mm x 20 mm stock fan on with a common 80 mm x 25 mm size upgraded one on the StarTech HSB4SATSASBA “4 Bay Aluminum Trayless Hot Swap Mobile Rack Backplane”. Bill of Materials 4x M3 x 30 mm screws 4x M3 x 5 mm x 5…
Holder for a StarTech.com Mini Dual 4K Monitor Thunderbolt 3 Dock with DisplayPort + Ethernet (TB3DKM2DP) dock. This holds the dock to the side of the desk. Which gets around the problem of the stupidly short thunderbolt cable on the…
Mount your Startech USB Hub securely! Mounts Startech ST4202USB USB 2.0 Hub, giving you open access to cabling on both sides (DC power barrel, USB-B & the four USB ports on the hub). Can screw right into a rack like…
Just a very basic sturdy VESA mount for the Startech ST7300U3M USB hub in 70mm and 100mm sizes. I recommend at least 5% infill and print with the countersinks for the screws facing upward. Uses standard M3 pan head screws for the hub…
Mounting bracket for a StarTech 2 Port DVI KVM (D86A2-2-PORT-8K-KVM) switch. Printed in Prusament PETG Galax Black
I designed these in onshape cad with parametric variables in mind these are 30mm wide by 45mm long for 6x3mm magnets but I also designed the untested 90mm length. I decided I like the look of 45mm segments better and the weight of cable…
This was made for a need to have 2,5" SSD's mounted somehow in retro computers. It will fit the Startech ide2sat2 adapter and allow for toolless 2,5" drive mount. The 2,5" drive can be screwed down from the bottom. The optional part is…
StartTech USB-C Minihub mounting bracket for model ST4200MINIC
An adapter to put in place on the hinge to prevent it from tipping over when mounting a monitor, such as a 49" ultrawide, which is heavier than the specs allow for. You can still tilt the screen left and right, but not up and down. I've…
Cable organizer for the side of a StarTech 12u Wall Mount 19" rack. I guess it work also for other StarTech open frame racks. You need: M3x10 countersunk screw M3 nut Print settings: PETG PrusaSlicer print profile “0.25mm STRUCTURAL” 15%…
For M4 screw. Very tight tolerances, do not hesitate to use pliers to tighten the screw.
Stand for Steam Deck with StarTech USB-C Video out hubx
Startech VGA KVM and Ubiquiti Flex mini switch for a 19" rack printed with Elegoo PLA CF on a Centari Carbon
Designed to fit Startech KM switch: P4A20132-KM-SWITCH
StarTech TB310G2 10GB Thunderbolt 3 ethernet controller cradle, which can be screwed under your desk. One side is open to slide the adapter in and the cables will then lock the device in place.
I love Nestea's Steam Deck stand design for the Anker hub, so I decided to remix it to fit my StarTech hub, which is too thick to fit into the original design and has a unique shape. The StarTech hub model number is DKT30CSDHPD . There is…
I wanted to add a USB hub to my Prusa MK3s. The StarTech ST4200USBM is an industrial 4-port USB hub with a DC power connector for 7-24VDC and a mounting flange with several holes. I made this mounting bracket to take advantage of the…
In the ever-improving process of organizing my desk, I needed a clean and accessible place for my USB hub. It's designed to fit this hub: https://www.amazon.com/dp/B01MSKSG70?psc=1&ref=ppx_yo2ov_dt_b_product_details
Originally designed for a Startech.com 6U wall mount server rack. But should work with their entire line of wall mount server rack products. It's a two piece design. You can installed the CAT 6 terminated or unterminated it doesn't…
I created this model because while the KVM was on the desk: The weight of the DVI cables made it pop up in the front. The cables from behind the desk were unsightly. The holes on the side allow for mounting using the built in rack mounts…
I needed a support for my 7.1 Audio sound card in my virtual pinball. I could not find one so I made that version.
Uses this dock: https://www.startech.com/en-ca/cards-adapters/hb30c5a2csc#overview-applications Printed at 20% infill at .2 layer height. Pretty easy print. I'd recommend you turn on ironing to give the part a nice finish.
This is a modification based on the Lian Li Additional I/O Kit that allows the Startech USB 3.0 Internal Multi-Card Reader to be added to the Lian Li O11 Dynamic EVO case. Remove the metal shell from the Startech card reader and install…
Here is a Raspberry Pi 3B case with NVME M.2 SATA drive support from Startech company support. You can buy the NVME card for Raspberry here: https://www.startech.com/en-us/hdd/pib2m21…
I really liked the look of Majestyk2k's SteamDock but I already had several hub's in a different form factor. This model is a remix of https://www.thingiverse.com/thing:5422982 You will need either a 90 or 180 (u shaped) USB adapter. I…
Needed a way to hold some of these things on the underside of my desk so designed these. I used drywall screws to mount to bottom (as I do for most things). I'm sure these will only fit the exact ones I have here but still worth your time…
A client wanted an HDMI switch hidden under their conference table but wanted to be able to access the HDMI Select button from the top of the table via a push button because they did not want to rely on a tiny cheaply made remote control…
This is a prototype module for the NAS ITX modular case - https://www.printables.com/model/590711-nas-itx-pc-case-with-stackable-expansions. It's specifically designed to accept the Startech HSB4SATSASBA. This module follows the existing…
I could not find any stands for my USB switch, so I designed one in Blender. This stand is intended for the StarTech.com 4 to 4 USB 3.0 Peripheral Sharing Switch (model number HBS304A24A ). It raises the USB switch at a 45 degree angle,…
Just a simple remix of Bele2009's excellent mount that adds retention tabs to keep it from sliding out front to back when mounted in a different orientation.
Lets you replace the 80 mm x 20 mm stock fan on with a common 80 mm x 25 mm size upgraded one on the StarTech HSB4SATSASBA “4 Bay Aluminum Trayless Hot Swap Mobile Rack Backplane”. Bill of Materials 4x M3 x 30 mm screws 4x M3 x 5 mm x 5…
Holder for a StarTech.com Mini Dual 4K Monitor Thunderbolt 3 Dock with DisplayPort + Ethernet (TB3DKM2DP) dock. This holds the dock to the side of the desk. Which gets around the problem of the stupidly short thunderbolt cable on the…
I realised that I don't have enough space to mount power strip in front of the rack, instead I decided to mount it on the side. Parts: M3 Heat inserts M3 bolts Screws for rack mounting Installation process: Unscrew 4 bolts on the side,…
