Liczymy pasujące modele…
Thank you steveleader for making this and available to us. I just swapped the temperature sequence, because starting with 190°C got my print get knocked off. Important: when importing the 3.mf file, copy the Before layer change G-code and…
The cup has tiny holes on the bottom so that the soil can absorb water from a tray. The cup has very thin walls on purpose so that it's easy to flex it and remove the compressed soil with the plant once it's time to move it to a larger…
Hot Wheels starting gate in which the base has been modified to support being mounted to a Hot Wheels track connector. This allows it to be mounted on something like a desk clamp (as seen in pictures).
This is the model of the Starting Player Token used in the boardgame Lying Pirates! Dive into the swashbuckling world of 'Lying Pirates' with this exclusive 3D printable Starting Player Token coin, featuring the iconic skull and crossed…
This design is inspired by Epic Gardening and their Epic 4-Cell Trays. To view the product that inspired this visit: https://shop.epicgardening.com/collections/all-products/products/epic-tray-4-cell-garden-propagation-trays I couldn't…
I was looking for some entry and exit tiles to print for our Gloomhaven sessions but couldn't find any. Therefore, I created them according to the designs in Jaws of the Lion, Gloomhaven, and Frosthaven rule books. These tiles fit the…
UPDATE: This is now an outdated model. I have created a new one that is much easier to print and also has a bottom tray to keep things neat and tidy. https://www.printables.com/model/639430-seed-starting-set-v2 These are a sturdy and…
I made this clip to give you roughly a 25mm starting gap for you filament when using the 3D Chameleon. This is just easier to use to line up the filament instead of tape. I use PETG to print this because it's a little more flexible than…
This is a major update to my original seed starting trays. I made a 2x2 model, added a base tray to go underneath a set of 4, and most importantly added some supporting structures for much better printability. A full set would be 4 of the…
1/64 scale racing starting grid. Has indents to center rolling cars. AMS required. I printed at a 45 degree angle so the lines are parallel. Can also be flipped over and printed upside down for a textured finish.
Same Overhang test but starting from 30º for faster testing
A simple rack that holds hydroponic tower grow cups upright while establishing roots in a seed starting. Blacks out the water area underneath of the tray to discourage algae growth. Once the seedlings are established and there are roots…
These transplant pots are 3D-printable versions of the thin black plastic starter containers you might find at your local nursery. These pots are designed to be semi-flexible to allow for easy removal of a started plant by gently…
A remix of self starting siphon by dougfeig. This version is smaller and easier to print: 60° overhangs don't need support Triangular section assures a better adhesion on printer's bed Wall size optimized for 0.4 nozzle Have fun!
If you have a mix of seeds and seedlings in your starting tray, you're bound to start using nutrients… and nutrients means algae. These covers will protect your empty slots and cores from excess light. NOTE : The cover without the slot…
Wall mount for the new Speed Champions F1 sets. It resembles a starting grid:)
See https://www.printables.com/@Dom360/collections/1929103 for more gravitrax junior pieces
I wanted a seed tray with deep pods to try starting bush beans as transplants and made it parametric, so I'll always be able to print the seed tray I need. This was my first attempt at a fully parametric model, so please play around with…
A full range of seed starting trays inspired by the ones sold by Charles Dowding and Epic Gardening. I designed this set of trays from the ground up for 3d printing and made sure that all the overhangs were vertical enough to be easily…
Seed pot scaled up and doubled into a 2 x 1 unit. Made to fit standard 10 x 20 jiffy/seed starting trays. Shown is empty seed pot print (black) and with lettuce seeds started (silver). Holds a generous amount of soil - experimentally…
This is tool for trimming perfect shape of the starting shoe friction material. Print it from PETG 4 perimeters, 25% infill cubic. You need 2 steel shafts 8 mm h8 tolerance length 1x50 mm and 1x70 mm. 2x screw M5x20 mm 2x nut M5 Category:…
Based on the Epic Gardening Epic 6 Cell Seed Starting tray. Has ventilation slits on sides for root air pruning, hole in bottom for drainage and easy removal, and 6 cells for planting 6 individual plants. 12 Cells fit perfectly into a…
Every part is going to need glued. I printed 50% infill no supports.
a tray to put water and the pots in to self-water them. i recommend you use ASA for outdoor use.
A tray with 30 small pots designed for starting garlic in water. I designed it to fit inside a small clear plastic container but this can work in anything that can hold water. Fill with water so its just touching the inside of the bottom…
Drone Helipad Landing Pad with Anchor holes. Category: 3D Printing
I needed a place to store starting fluid that was readily accessible, yet not on a shelf with the rest of the stuff in my shed so I modeled this up. This fits a standard can of Lucas Oil starting fluid and fastens to whatever you'd like…
This seedling tray was inspired by the epic gardening 6-cell tray. It features 4 side slits per cell for air pruning and one bottom hole per cell for easy bottom watering and plant removal. Recommended materials: PETG, ABS, ASA or other…
Another 6 colors 3D print .... with 6 ways Flux capacitor, MarlinKimbra (MKDuo),,,,,, printed with BFB 3000 IeC refurbished...."Alligator" on board.... ;) A dream for first race in Australia..... FORZA FERRARI!!!!!!!!!!!!! Formula 1…
simple bin to hold the “Greenjoy” seed starting deck. if your printer mess up and created some gaps, you can simply rub and melt some wax on the inside part of those problematic area. sponge holder tray from darkcody :…
Print these two parts in different colors, stick (and maybe glue) them together and enjoy your flying rocket. Print with supports. The diameter of the plant hole ist 100 mm. Scale it up or down to the size you need.
I made this as an easily labelled mini soil blocking tray, but also starting just filling it with my seedling mix and then pricking the seedlings out and potting them up. It works fine both ways for me, and was water tight. I've only…
Self-Watering System This is a self-watering insert system for seed starting. It is intended for re-using containers as seed starting pots; adding the self-watering reservoir, drip trays, and a greenhouse top/lid. The STLs I've provided…
A small pot for starting seeds. the raised base keeps it out of the water and also allows light to get to the base to stop the roots growing thru the mesh. Look at the 3mf file to see how to print the mesh. adjust the infill size to suit…
This model is used to store the monster, condition, and starting items mini cards for Arkham Horror 3rd edition. I designed this to store all of the cards from the base game and all current expansions, with a little space for more cards…
We used Slicer Goodies on here to make the lettering and not sure where we got the blank plant label from. Hope every one likes it. Look at all the other plant labels in our collection.
A tray and starting components for Pandemic Legacy Season 0.
Includes: To save material and time, print trays with a single perimeter. 48 Cell Tray 24 Cell Tray 12 Cell Tray The legs will need a little more structure to print properly. 5mm Leg Spacer 10mm Leg Spacer 15mm Leg Spacer 20mm Leg Spacer…
Reuse your old Nespresso capsules as tiny pots for growing seedlings. Remove the top of the capsule and clean the capsule. Add some nice soil and your seeds. Place the capsules in the tray on a small plate. Water all of the pots at the…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Added some negative space over some parts of the grid to accommodate the 2×2 starting tile for the Mists Over Carcassone expansion / co-op game. It looks awful in the Slicer but prints perfectly. :P
The Seed Starting Soil Presses in this design are used to help in planting seeds in multi-cell seed starting trays. The three sizes of presses in this set cover many of the tray sizes commonly used in seed starting. The presses will make…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
This is a drilling template designed to help you easily install double or triple electrical wall boxes (68mm diameter) in plasterboard (placo) walls. It aligns perfectly based on the position of your first hole, allowing fast, accurate…
This is the house where you start in the game The Legend of Zelda: Link's awakening for the original Game Boy. I made this in 1997. I played the game a lot and I wanted to see if I could recreate the house as close as possible to the game.
For the starting player piece, I scaled down cerberus333's spaceship ( https://www.thingiverse.com/thing:20872 ). The other two are custom box for cubes and dice, while the other holds the player's starting ships. Category: Games
The ring must also be printed with the funnel, it attaches to the bottom of the funnel to lock the part in place (Glue may be needed). This design took way more testing and redesigning than any of my other models, the main challenge was…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
I had made som larger signs, but concluded that smaller will do fine, especially handy when seed starting inndor. And it prints fast! Very easy to make new version in inventor simply edit the drawing for the ebossed text in the part. The…
simple pot for starting seeds like sunflowers or corn. you might have some problems printing the horizontal raised bottom. i made two files, a single pot and 9 seperate ones.
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
After printing the board overlays and a tray for the tiles, I needed a tidy way to store the factory displays, the scoring markers, and the starting player marker. So I made this one. This is a first draft. It works, but you have to tip…
Dice is 45 mm in height I use the dice in the Sagrada board game to represent the starting player. Printed in red. The dots I painted black.
Modelo creado para poder poner todos tus legos f1 como si estuvieran en la parrilla de salida . No es necesario el uso de tornillos para su montaje esta diseñado para poder pegarlo con cinta adhesiva o cinta de doble cara. Existen dos…
This is a model i made of the blue starting wand of the game Noita. I used a 30mm x 1180mm wooden rod as the core. I glued the pieces together using cyanoacrylate glue. There are two different crystals to choose from. The crystal in the…
My wife and I love F1, and we wanted to make something cool for our toddler to play with that was F1 inspired - we came up with the idea of a sequence of red lights that mimic F1 style race-start lights. Alas, the internet could not…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
These are mini garden tags I created for seed starting trays. It works perfectly for labeling your trays with whatever you are growing. I have also included a blank one to make your own I printed mine in PLA, and they held up just fine…
## Ironing Test Square (40 × 40 × 3 mm) A small, solid square for tuning ironing so top surfaces come out smooth instead of lined, gappy, or blobbed. Size is large enough to see stripes and edge buildup, small enough that a test print is…
For tube diameter 22.4 mm 2 socket head cap screws M4 x 30 2 lock nuts M4 ASA Filament recommended. PET-G will work too.
a cool way to turn on your car
Simple model to signal who is the starting player!
Update: Made the lid's Z height higher and added a .25mm lip. It snaps on now as it was a bit loose prior. Created a lid for the original seed starting pot. Helps to keep moisture in during the germination process. Printed with Blue PETG…
This is a drilling template designed to help you easily install double or triple electrical wall boxes (68mm diameter) in plasterboard (placo) walls. It aligns perfectly based on the position of your first hole, allowing fast, accurate…
These are designed to tamp down the soil in square seed starting trays. 2026-02-08: Added 1.5 inch round tamper for starting seeds using cardboard toilet paper or paper towel tubes.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Gets over the rim of a cup by itself. This siphon starts completely empty and primes itself: the liquid climbs above its own level, goes over the rim and drains out the other side. You don’t suck on it and you don’t pump it. It’s just…
This is very similar to the remix created by "byWulf," but I wanted it to be easier to start the filament on the spool.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Hideg indító kábel diselhez és kézi karburátorhoz. Pteg és TPU95A és bármien vezetákes kűbellel befűzhető, ideiglenes vagy helyetesítő pótalkatrész. 161711501/C https://www.heritagepartscentre.com/eu/161711501c-choke-cold-start-cable.html…
Print the tower in ABS for rigidity. Print the spring-loaded starting gate in PETG for rebound strength. Print with small layers - I printed mine with 0.12 mm layers to ensure that the connectors fit in the angled slots. Spring strength…
Knowing that there are many people around who love marble racing I designed this starting gate as an extra part compatible with the Marblevator Starting gate in action: https://youtu.be/M8bvlDLAor8 There might be need to file the lever…
Machine à laver Daewoo De dwd-ed1212 bouton d'allumage Print Settings Printer Brand: Prusa Printer: i3 MK3 **Rafts:** No Supports: Yes **Filament:** prusa filament PLA Category: 3D Printing
I created this so I can sprout seeds for my Gardyn Grow tower. I would recommend using a food safe filament for the print. Also use a 1.1 extrusion multiplier to ensure the container is not going to leak.
This 3D-printed pickup height hooking gauge is a practical workshop tool for passive P-Basses (split-coil pickups), designed to set reproducible pickup height starting points without using calipers. It is not a “perfect setup” and not…
Print with only one wall, the tinner the better, roll up newspaper and then fold the bottom
A reusable seed-starting tray with a grid of cells and drainage holes for raising vegetable, herb and flower seedlings indoors before transplanting — a tidy, plastic-waste-free alternative to disposable trays. Parametric: set the grid…
A step file that represents half of a clip for an sn30pro. Mirror it for the full clip. I've included a folded print to test the fit on your device. By folding the clip it lets you print it with no supports.
print with tree supports 0.2mm nozzle Printed in PLA 150mm's
This base was designed to fit on top of the makerbot sketch, which is an enclosed printer. I supposed it can be used with any flat object, however. I printed mine as half cut pieces then epoxied them together.
A small modular seed starting pot, designed for a cover to be fitted into the slots on the side. I have not fully finished designing everything thing yet but once I do, I will upload all of it. The plant pot can be used individually or in…
Make free, biodegradable seedling pots from old newspaper. Plant the whole pot out later: the paper rots away and the roots aren't disturbed. HOW TO USE • Cut a strip of newspaper about 10 cm wide and wrap it round the former, with about…
A full range of seed starting trays inspired by the ones sold by Charles Dowding and Epic Gardening. I designed this set of trays from the ground up for 3d printing and made sure that all the overhangs were vertical enough to be easily…
Modelo creado para poder poner todos tus legos f1 como si estuvieran en la parrilla de salida . No es necesario el uso de tornillos para su montaje esta diseñado para poder pegarlo con cinta adhesiva o cinta de doble cara. Existen dos…
These are designed to tamp down the soil in square seed starting trays. 2026-02-08: Added 1.5 inch round tamper for starting seeds using cardboard toilet paper or paper towel tubes.
A small modular seed starting pot, designed for a cover to be fitted into the slots on the side. I have not fully finished designing everything thing yet but once I do, I will upload all of it. The plant pot can be used individually or in…
a tray to put water and the pots in to self-water them. i recommend you use ASA for outdoor use.
This voluminous UPGRADE SET for your Traxxas TRX-4M and its trailer (#TRX9795) includes the following: (Please have a look at ALL pics to get an overview!) CASE BODY WITH SLIDING DOOR Slip-on trailer case body with sliding door for the…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
This deign happened because I wanted to make a more modular 72 plug system. The plugs measure 1.5 inches sq. at the top and tappers down to 1 inch sq. with a height of 2.25 inches. There is a model with air pruning and one without. Large…
Shadowheart's starting gear mace from Baldur's Gate 3 for cosplay! This listing is for the digital .STL files ONLY. The mace measures approx. 80cm in length. You can choose between an option with a printed handle (with a 12mm internal…
Starting from an STL model of the left lens, build a parametric frame for your glasses using OpenSCAD. Hinge and temple design inspired from by u: erickso 's glasses but both redesigned from scratch in FreeCAD. * * * Rev.1: adding taper…
