Liczymy pasujące modele…
An AirTag mount that sits hidden under the bottle cage on a bike. The mount (including the AirTag) is thinner than an actual AirTag! See “AirTag Preparation” below for more info. The mount is made of two halves. The top half gets screwed…
Print them in the supplied orientation. Using a 0.6 mm nozzle, you can get away with a single perimeter and no infill. They are meant to be attached with tesa powerstrips, command strips, or anything similar. If you want to print…
This is a protective case for the Seeed SenseCAP T1000-E which lets it attach to Magsafe compatible phones. It is only 9.5mm thick and gives access to the button and the charging port on the back. There is also a slot cut out for a…
A replacement rear wheel nut cover that also fits an AirTag. Fusion 360 file is provided so it can easily be adapted for newer Xioami scooters. Print in picture was printed with 0.6mm nozzle and PLA. If scooter lives outside, PETG or…
These are supposed to be in mm, not cm. Scale to 10% if needed. 09/APR/2022: Thickened and remixed BLTouch mount so the wires are on the inside, added screw holes for the 4020 fan This is an amalgamation, fix, and re-modeling of: The…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Simple coat hanger with hidden screws and stealthy desing Print hook with supports, don't use pla if exposed to direct sunlight. drill screw mount into wall using one or 2 screws.
This is a wall mount for the original ps2 that is made to be as discreet as possible. I was unsatisfied by the models I could find as I would like the mount itself to be seen as little as possible. After all, you want to see the painting,…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Description Original description from TrevorK : " This bucket has the same rounded corners as the printer and has a low profile so it doesn't stand out. It also has the same width as the spool of filament on the back, so it doesn't add…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Clad in a snug, cloth-wrapped tunic and mask, this nimble gnome crouches low in a poised fighting stance, ready to spring into action at a moment’s notice. His pointed hat is tied back with a simple knot, allowing for unimpeded movement,…
Remix of the StealthySwiss to accept a GDStime 4020 fan. Slip fit 4020 fan in the front. Use the back file with M3x25 screws and a fan cover if you want a guarantee of it not coming out. I've tried a few attempts, but the back file always…
A replacement rear wheel nut cover with a hidden compartment for Silver Monkey SMA193 AirTag alternative (rebranded mili mitag hd-p16). Best to print on the visible side down, no supports needed. Installation Remove reflective sticker…
This is inspired by the famous F-14 Tomcat and the F-24 concept from the ATF program. For those who don't know the F-24 concept is basically a naval version of the F-22 with variable-sweep wing. Unfortunately, it remained as a concept. If…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Just saw some flex in my original mounting plate and solved for X. Thought I'd share. Category: 3D Printer Parts
Stealthyswiss Mounting Bracket for Microswiss Linear Rail Direct Drive Extruder & BLTouch This part is designed to facilitate the use of both the " StealthySwiss " ( Voron Stealthburner remix) and BLTouch with the Micro Swiss Direct Drive…
Printed with a .6mm nozzle in mint green Inland PLA at standard quality I would suggest some kind of supports as well bc there is some sillyness happening here! Any questions or concerns can be directed towards me, myself, and I <3
For using a klicky/euclid probe, no BLTOUCH mount for the stealthyswiss
The SealthySwiss doesn't work with CR Touch due to the location of the connector, and has a tendancy to bend even if printed in ABS.
50% version of the original one.
I wrote up the full node instructions here: https://phillymesh.net/2025/05/16/water-bottle-node/
For all of your Ender 3 Linear Rail Stealthyswiss cable management needs NOTE: The photo I took of my cable routing uses an earlier revision of the part. The current iteration is a little wider along the X axis among other changes. An…
Clad in a snug, cloth-wrapped tunic and mask, this nimble gnome crouches low in a poised fighting stance, ready to spring into action at a moment’s notice. His pointed hat is tied back with a simple knot, allowing for unimpeded movement,…
An AirTag mount that sits hidden under the bottle cage on a bike. The mount (including the AirTag) is thinner than an actual AirTag! See “AirTag Preparation” below for more info. The mount is made of two halves. The top half gets screwed…
