Stealthy Bambu Poop Chute Bucket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stealthy poop chute with magnets (or without, your choice)! No extra space needed and works with external spool.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 415
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
Original description from TrevorK:
"This bucket has the same rounded corners as the printer and has a low profile so it doesn't stand out. It also has the same width as the spool of filament on the back, so it doesn't add any dimension to the printer. I added cutouts for magnets so it sticks to the back of the printer. There are three versions: one that uses the bed scraper magnets included with some bambu lab printers, one that uses gridfinity magnets, and one that has no magnet cutouts.
Printed with PLA on standard settings, but material and settings shouldn't matter much."
I added the BambuLabs logo and font to the front of the bucket.
I personally printed the version for the magnets from Bambulabs, which come with the printer and are intended for a bed scraper model. As I did not need them, there are perfect for this. You can also use GridFinity magnets, which are 6mm in diameter and 2mm high.
Printing
- PLA with standard settings, 0.2mm layer height
- 2 perimeters
- Sparse infill of 5-10%
- May want to slow down layer times for the model, at least around the text. But as this might create artifacts I would advise you to slow down the print time for the whole model instead, if you want a very clean look. I printed mine with the standard 0.2mm profile on a P1S and it looks very clean with very minor artifacts around the text if you look closely.