Liczymy pasujące modele…
Features Left-side mounting Steep angle to prevent filament poop from getting stuck Matching bin that fits under the chute Easy installation with no printer modifications required, uses existing screws and screw holes
I spent a long time looking for an elegant solution for the steep curves that isn't permanent. I found the safety fence and adapted it to the scale and my clips. I have modified my clips so that they can be used in steep bends. The fence…
The original stand positions the Stream Deck XL at an 50° angle. I needed a steeper one to get rid of ceiling light reflections in the buttons, so i designed a replacement with an 63° angle. You will need 12 5mm x 2mm magnets to snap in…
See https://www.printables.com/@Dom360/collections/1929103 for more gravitrax junior pieces
Here we have the first of many scale figures I have created for my 00 train layout. The figures are firstly put together in MakeHuman setting up the armature and clothing, and a basic pose. I then import into blender to get the final pose…
Simple yet elegant flowerpot base. Also used as a dish or bowl. I printed mine with a .6 nozzle at .15 layer height. Also added a version for 2 bases on the build plate. Designed in Fusion360, for the fillets :)
This is the modified version to accommodate the safety fence. It works with the original Carrera fences, but also with the modified version of the safety fence: https://www.printables.com/model/693001-safety-fence-for-steep-curve-racetrack
its a really snugfit and a little force was needed for the XL. Considering scaling it 0,x % up.
Althou pretty satisfied with the 3d-printed stand from the original I went for an even steeper version to reduce glare on the display and to make it a bit more comfortable to use as a general shortcut device for other applications. I have…
These rails have been slightly extended to accommodate gradients that cannot be handled by standard rails. Having a few of these on hand can be very useful in a pinch. Since it can be difficult to identify these slightly extended rails…
Stand to keep laptops at an almost vertical angle. Supports the laptop back but frees the vents intake (at least for mine). Raises the screen to allow a more relaxed desktop position while freeing a lot of space on the desktop. Perfect…
The reduced inclines means our electric trains can now drive up without failing. Its increased in length but still fits on the pretty standard 250mm build plates. You can use the trestles of the original. So one of our 2 trains can go up…
I wanted a stand with a very steep angle, close to 90 degrees. I've seen a very nice-looking model for the mini and used it as an inspiration. If you don't want the stand to move around add small rubber feet to it. You can barely see it…
Had a small pencil sharpener for the kids and took the blade and screw from that and made the angle steeper.
tried to reduce the slope from the original wide vase to make it print without an issue, changed a lot of parameters 1) enlarged the size to 15 cm diameter 2) changed the nozzle from 0,4 to 0,6 mm 3) Prusa PLA -> colorfabb XT
Istvan Matuz ( https://www.instagram.com/istimat.g00/ ) wrote an extensive blog post on creating a tea steeping robot: https://solderchips.wordpress.com/2016/01/07/3d-printed-arduino-powered-lazy-mans-tea-steeper/ My remix modifies the…
I added 5 degrees to the angle to allow my ERCF mounted cutter to clear my top hat while being mounted on the side. The ideas is that I want a short and relatively straigh filament path from ERCF to my Triedent toolhead, without looping…
Add a touch of dark humour to your tea break with The Steeping Gallows — a practical tea-bag string holder designed to clip onto the rim of your cup. Simply attach the holder, loop the tea-bag string over the hook and let your tea brew…
LED strip mount countersunk.
The wedge is inserted in the hinge of the legs to increase the legs steepness by 10°. The wedges are held in place by zip ties. The eyepiece holder is also exchanged to a smaller printed version. The steeper legs requires less space on…
When geological contacts cross valleys or hilltops, the contacts are bent. The direction and amount of bending depends on the slope of the valley and the dip of the contact. This is one of six models that demonstrate the “Rule of V's”.…
Resin printed mine, but could use PETG, PLA, etc.
This flowing piece prints without supports. There is a 75% size gcode version and a 100% size gcode version.
This was reliable but awkward to thread and had some friction at large angles. Been through a few ideas for this latest is https://www.printables.com/model/1472627-sh02-filament-dryer-guide-v2. Early days but it's working a lot better.
Fresh off the Mad Doctor's operating table is my version of ubiquitous steeple Cab designed for HOn30. I've made steam and diesel engines, so why not an electric loco? This model was designed to be printed on an FDM printer with a…
This is the build plate for Cornwall Street Railway Light & Power 14, a 1929 steeplecab locomotive preserved at the Illinois Railway Museum. This locomotive was built in January 1929 but not sold until 1936 to Springfield Terminal, an…
Burley Temple of the Church of Jesus Christ of Latter-day Saints. I just updated the steeple of my original Burley temple to look more like the actual steeple.
Large church with tower joined into one (1) model. Recommend supports, especially for edge of roof only where the cutoff for church and tower join. The Top of the roof is optional, but adds a cool look. The top of the tower is hand…
This tool has a scale of 100 mm to calculate the steps of the extruder with the ejection of 100mm of filament. The part that is fixed to the aluminum profile can remain installed there. The part that measures can be put on and taken off…
steeps one or two cups of tea. USB powered the switch came out of an old pc power supply. motor https://www.amazon.com/gp/product/B0716T8JNN usb plug https://www.amazon.com/gp/product/B0183KF7TM Category: Kitchen & Dining
.2 layer height, .4 nozzle. Suggest 3 wall loops with inner outer inner wall printing order for precision. Also suggest using random seam so that the roller doesn't have a lump in one spot at the seam.
A replacement base for David's tea steeper.
This was a ridiculous build I made to automate my tea steep time for a specific tea steeper found at: https://www.amazon.com/FORLIFE-Brew-Mug-Extra-Fine-Infuser/dp/B001JPA3Y8 More info can be found at:…
Steep and deep hook for your MFT3, to hand onto it whatever you need, from a trash bag to your hearing protection. Nothing will come off. Slides easily onto the Festool MFT3 side rail. Enjoy and posting a make of your print would be…
made a small minimalistic hook for our attic/loft stairs in out tiny cottage/house works really well to hang bags or other items without dropping or forming printed in PETG, 6mm high
Simple and stupid spool holder that fits in more space constrained environments.
The reduced inclines means our electric trains can now drive up without failing. Its increased in length but still fits on the pretty standard 250mm build plates. You can use the trestles of the original. So one of our 2 trains can go up…
Keep mud out. Also has a small cutout to wire a magnet sensor.
Keep mud out. Also has a small cutout to wire a magnet sensor.
