Liczymy pasujące modele…
This is a remix of 87squirrels MasterSpool Remix. https://www.thingiverse.com/thing:2794052 I just made the wall a little more thick to increase stiffness and reduced the diameter to 100mm to make it easier to use. meanwhile I have…
Wydruk około 4,36 €–5,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description A simple clip for socks to keep them paired for traveling, laundering and drying. This ist the stiffer version with 3mm height Best working slow printed from ASA without cooling . Do not use PLA, because it will deform in the…
With original springs Landy Mini is very "jumpy". I wanted to keep the original design as much as possible and so I added small “connections" to block springs from moving to much.
updated left block with cutout for fan based on Dustmuffin's design. see “x axis block left v6 v0” I redesigned the X-axis blocks to make them stiffer and easier to print and modify. features: pom nut location on top and bottom of the…
This ratchet is a little longer, meaning it sticks out the tip a few mm. It is also a bit stiffer than the original.
Did you build the Hill Mount for Hadley and still have the remaining 2 feet of pipe laying around? Print a few more parts and further stiffen your telescope mount. Are you planning to build a Hill Mount and like it to be even sturdier…
Mount for the Pluto-IIx HDMI board so it can replace the original Digital AV Port of the GameCube. You can find the board here http://www.knjn.com/ShopBoards_RS232_Parallel.html This is a remix of…
The X-End is the part I find myself adjusting all the time for a level bed. This mod adds more stiffness and gives a proper thread for all screws. You can also easily pull out the pulley to the front, in contrast to the original prusa…
I added tolerance to the screw holes for the Z-motors. I changed the model so it would be compatible with 10 mm long M4 heated inserts I made the top of the bracket 4 mm thicker to increase stiffness The thicker top bracket allows you to…
This is a remix of fbeltrao's great Insulation and Mount Plate for the Mellow Fly MiniAB or BigTreeTech Piggyback36 boards. The plate was made stiffer without changing the external geometry.
Less fragile version of handle. Print in PET-G. PLA not reccomended.
This remix adds shafts in places where moving parts rotate. This change makes it easer to screw full model together becouse you don't need to leave space for parts to move. The orange outline on picture is 0.1mm higher and lower than the…
It's difficult to adjust the tension when it's in an enclosure, so I added a screw so that you can easily adjust the tension even if there's a wall on the left. Requires a DIN562 M3 square nut like the original mod. October 16, 2023 Data…
The Z-Motor mounts are taller and encloses more of the Z-rod. I also recommend to place a 2mm rubber pad between stepper and mount. I also added two extra screw holes but to stay only on the two top ones is also fine. Those rubber sheets…
Hello, I have modified the two versions of the reel axis to be able to insert a PMMA or PA axis and increase the stiffness.
These files remix the original Voron files to add an additional hole so that they can be mounted to Ramalamas stiffer DIN mount. These are less prone to breakage, has a lower profile and are easier to mount. The stiffer DIN mounts can be…
Combined Positron-style conversion kit for EasyThreed K10 by @hoge_coc and EasyThreed K10 Alternative Bed @Eladisimo_355
Just saw some flex in my original mounting plate and solved for X. Thought I'd share. Category: 3D Printer Parts
I tightened up the steering bracket so the wheels would turn properly without the slop of the stock system. I made a new center brace to stiffen up the whole chassis. Much more precise steering now, with the shock clips no more sag in the…
This modification is untested by me. But I got feedback from some testers that the firmware test is passed.
The model is optimized to print flat on the bed, making printing simple and reliable with no supports required. Feature
to make the suspension stiffer - 6mm Category: R/C Vehicles
Modesty mesh with vertical rib for improved stiffness
A simple modification on the amazing large bucket created by BCN3D, I personally printed it in ColorFabb XT, which is great, but I found it to be a little flimsy, with some unnecessary flex, that made the cloth support not quite…
A simple remix of the front part, it was too wobbly to me so I designed these two holes. The t-nuts and the bolts used are spares i got with the printer, so you should have these two. Print Settings Printer Brand: Creality Printer: Ender…
I was quite surprised how few of this 120 degrees connectors is available to download, for 3030 it was none, so here one is :) I printed it from pla (as i think it is not that bendable as petg), 0,25 structural, 5 perimeters 5 top and…
Uses the spring based mag release for the Ehdrien gecko. More stickout and a thicker leaf spring wall.
When too much weight is stored in these sorting bins of the “Action” store, the walls are pushed outwards and the bins collapse. This even stiffer stiffener, prevents the bins to collapse; shown as the orange stiffener between the top 2…
Inspired by: This model uses M5x(8 or 10) screws and T-nuts instead of the original screws to secure the crossbar. It is more secure for applications such as installing a nozzle-wiper/purge bin. BOM Name Amount M5x8 Screws 6 M5 T-Nuts 6
Description This SUP Can Holder fits a can with a koozie, to keep your drink cool. I have used it extensively and it works great for a nice day on the water. The Can Holder has two hooks to fit stiffer SUP bungee cord(s). The continuous…
I really liked the nippleshuffler by Lexapskov (https://www.thingiverse.com/thing:4605923) but the print turned out a little flimsy for my clumsy hands. So I added a little strengthening.
Small improvments: - hex nuts - printability
I had a project made, and I realised after that project, it was really hard to print gears and correspond them. When I was searching for a model for a gearless power transfer product, I came across this method, but I couldn't find an STL…
There is only one part of the B34R that bends and it's the top rail. Well now that is fixed.
The model is optimized to print flat on the bed, making printing simple and reliable with no supports required. Feature
I had a project made, and I realised after that project, it was really hard to print gears and correspond them. When I was searching for a model for a gearless power transfer product, I came across this method, but I couldn't find an STL…
Thanks to Steiner-Se for suggesting and testing this model. The idea was to make a tighter DIN rail clip, and try to standardize the hole spacing to 50 or 55mm, since there are many designs which use 46mm, 52.5mm or other hole spacing,…
Since these models could be used with electrical components, if you use these models, it is at your own risk. Using a fire resistant filament is probably a good idea too. This is a remix with a clip design that originated from Ramalama2…
