Liczymy pasujące modele…
Sleeve that slips over the 2-stroke oil fill cap that reduces the build up of dirt to the underside of the cap lessening the chance of dirt being introduced into the oil tank during oil fills. Print simply slides over the top of the cap…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Naruto to Boruto Paper Bomb / Brush Stroke Picture Good candidate for Color Change at Z height. Easy 2 tone. UV Map Enhanced with Stable Diffusion img2img - used as (Displacement) Modifier.
Wydruk około 4,80 €–5,87 € nettoWstępna wycena jednego wariantu
An AvE style warning sign with attitude for the petrol engine enthusiast add blinkenlight and chooch to where it's needed Size The model measures approx. 45mm x 45mm x 0.65mm Manual Multicolour This print uses manual multicolour with four…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
Wydruk około 3,39 €–4,14 € nettoWstępna wycena jednego wariantu
REMIX 3D PRINTED BASE This is a 3D printed alternative base to the original suggested in wood. I designed to be used with M3x25 bolts (1/8" x 1") No need support. You can see the original model here: 4 stroke solenoid Motor with 3D…
Wydruk około 9,39 €–11,47 € nettoWstępna wycena jednego wariantu
A flathead engine, also known as a sidevalve engine is an internal combustion engine with its valves contained within the engine block, instead of in the cylinder head, as in an overhead valve engine. The boxer configuration with two…
A flathead engine, also known as a sidevalve engine is an internal combustion engine with its valves contained within the engine block, instead of in the cylinder head, as in an overhead valve engine. Printing and Assembly The parts…
A flathead engine, also known as a sidevalve engine is an internal combustion engine with its valves contained within the engine block, instead of in the cylinder head, as in an overhead valve engine. Printing and Assembly The parts…
General A Overhead Camshaft engine is an internal combustion engine with the camshaft placed in the cylinder head. This single cylinder model has four valves, with an engine capacity of 30 cc. This model was designed in Tinkercad.…
I have just added a new STL file called washer, this can be placed between the engine case and the handle to remove excess play. All parts are pre oriented and print with no support material. Very nice drawing to see how 2 stroke engine…
A flathead engine, also known as a sidevalve engine is an internal combustion engine with its valves contained within the engine block, instead of in the cylinder head, as in an overhead valve engine. A matching 2 speed gearbox you can…
2023-06-16: Updated with stl and step for Mini SB released with v0.2r1 on June 10th. Accent parts are now 0.2mm thick instead of 0.4mm. Less hassle with one layer accents when using the 2 virtual tool head method. Remix of the great work…
Updated the original faceplate for multicolor print and added a stroke around the edges. Also removed the fillet from the hexagon corners. Made to match this Mini SB…
cover for intake ports when working on engine
This simple little golf stroke counter has helped my score keeping this past season. Originally designed for multi-color printing, you can also print the dial and the body without the numbers and logo and fill in the depressions with…
Use either the separate stls or the multibody to print the parts in different colors. The accents are 0.45mm thick so they should be at least two layers thick.
We have made a four-stroke engine for you. It is suitable as a learning tool for all students. To assemble it you will only need small screws to connect the piston to the crank. Print with the support.…
The parts should to be printed on a smooth build plate, not textured. If possible, avoid elephant foot. I printed the model on a PRUSA MINI, with PLA+ filament, layer height 0.15 mm. I use Hard Plastic Glue. For assembled and exploded…
stroke coach holder for NK stroke and speed coaches, you just need to put it in double side tape and put on a boat, you can see original here. Took quite a few tries to get it right.
Two versions of short stroke spacers for airsoft GBB like Hi Capa, one open one closed, both 5mm tall, change your Z size as you need. Recommended: 2mm, 3mm, 5mm. The open version works better with PETG, it flexes more so it can go in and…
Rumaged through my saved Pepakura folders and was once again inspired by Killonious great work on his helmets. Please note these files were freely uploaded to the internet via Pepakura.com. I can not take credit for these models, only the…
I wanted to make my Knomi look a little more Dapper so I remixed it using the technique @Panzarkatten used for his SB Shroud. I printed in PrusaSlicer Set up 2 extruders Change tool change GCode to filament change Import 3MF Orient Set…
Test model of a yamaha yz125
Make your own table-top model of a four stroke, single cylinder, OHV (over head valve) engine. This model features a functioning crankshaft, piston, camshaft, and a pushrod-rocker valve system. Rough Dimensions: 172mm x 122mm and 273mm…
A proof of concept for the 2024 Porsche 6 stroke internal combustion engine patent. Showcases the 6 stroke functionality with a single cylinder cutaway view. Standard Lego axle compatible (used to mate the assembly).
Učební pomůcka do hodin fyziky. Model je poháněn motorkem z auta z autodráhy o tvaru zploštělého válce. Průměr motoru 21mm a přes zploštělou část 16mm. Model je poháněn 9V baterií a výkon regulován regulátorem. A teaching aid for physics…
Non-printed parts needed are bearings, shaft, valve, timing cam and belt, switch, ignition circuit etc. All parts are metric, but if you can find a close fitting imperial parts they should work too. Modular design allows for 1, 2, 4…
Replacement knob for the fuel selector on many 2-Stroke Seadoo models. There are 2 models, one is a shorter version without the need for supports and a longer version modeled closer to factory. Both work fine, just personal preference.…
English/Английский Hi!! This is a model of a 4-stroke internal combustion engine. The model is designed to study the operation of the engine. This model can also be used as a mechanical anti-stress. !!! For correct functionality, it is…
impression of DC mercenary deathstroke. The items: sword, pistol and knife are character complement items.
Four Stroke Cylinder Head Organizer
I was too unsure with a printed chain when I designed this, so I went with gears. The model in the pictures is still with metal screws, but i updated the files so all of you can have fun with this model and are not meant to search for…
Arrow Mask Death Stroke, Cheers Jace
Designed my trucks 6.7L power stroke badge due to disappearing on the passenger side. Came looking for any 3D model to see if anyone have done it but no one had, So I took it upon myself to try to create one in Solid Works. "Turbo diesel"…
0.4 Inch 0.4" Stroke version. Here is the product on Amazon: https://www.amazon.com/gp/product/B09YQYRHB9
The Worker Seagull Trigger Short Stroke + Safety Delete is a drop-in mod part for the Worker Seagull that reduces the pre-travel of the trigger before it engages with the catch. This allows for a snappier, more responsive trigger feel.…
This labeled kinematic engine model helps visualize piston movement during a 2-stroke engine cycle. Turning the knob at where the conrod attaches to the crankshaft moves the piston from BDC to TDC. Parts of the 2-stroke engine are…
Whether you are installing this as a buffer to extend your AAP-01's lifetime or as a short-stroke kit , the installation process is the same. You can follow any YouTube tutorial for an AAP-01 short-stroke kit installation; the only…
THIS PROJECT IS WORK IN PROGRESS; PARTS MAY CHANGE AT ANY TIME! This is a modular Airbox Design which has mainly been designed for use with Moped Two-Stroke Engines. Common brands are Sachs, Ciao or Puch. The modularity allows combining…
I recommend using stronger materials like ASA or ABS 100% infill and support enabled
Create your own golf stroke counter! Follow These Instructions: https://www.printables.com/model/703299-bead-counter-geometric-shapes
Model is of protecting Mey Interceptor Crossbow from dry fire. Emulates 2 arrows, so magazine capacity is reduced to about 16 maybe 16,1 if you squeeze. This model catches the string at beginning of stroke, so less force is exerted on…
Deathstroke inspired Faceshell Enjoy Category: 3D Printing
For training your pool stroke. Modelled by request. *Not yet tested
After removing existing grips, unscrew bolt in bar end, remove washer from bolt and reinstall through bar extender and install new grips per manufacturer. Can be cut to length in slicer as needed, 30mm extension in the file. Printed with…
3d printed parts for stroke coach holder that you can put on wing, best to use some material that is flexible like PLA or PETG not ABS or ASA.
Simple model to hold a dial indicator for measuring piston protrusion. You mount it to the cylinder with a head bolt slightly snug and use it to measure the piston height above or below cylinder top surface.
A Blast Golf Sensor Mount for a Super Stroke Putter Grip with the Counter Weight Option
Pull-start handle for 2-stroke 47cc/49cc engine. Use M3 nuts and bolts to assemble it. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0.3mm Infill: 50% Filament: gembird PLA+ black Notes: For…
In this electrifying digital artwork, a right-handed cricket maestro takes center stage at long-off, ready to unleash a mesmerizing pool shot. With every muscle poised and the bat held high, he exudes power and finesse, promising a…
Get rid of those thoughts: Is there already two-stroke oil in it? What type of gasoline is in the canister? Just put the label on each canister and screw the bolts into the right holes to indicate the current content. No slider that slips…
Edit: Did it wrong. Corrected now! Thanks to GuMieth for pointing that out! Now 2 Types! Beaker for measuring 1:50 two-stroke oil for 5L (roughly 5 quarts) of gas/petrol. Messbecher zum Abmessen von 1:50 Zweitaktöl für 5L Benzin.
Pool Stroke Trainer as requested by a Reddit user.
Printing: The logo and Hex design are technically 7 different objects and should be separated out under the Objects in your slicer of choice. Logo/Hex pattern is 1 0.2mm layer deep. Model is already oriented in the .stl.
I made a file that HAS A 4 STROKE engine mode in it it is a 13-hour ender print enjoy 50% infill use all supports best temp is 210 c and bed 60 c Category: Models
If you have a problem with the building, write to me I printed everything with a 0.4 mm nozzle and a 0.2 mm layer height. The screws don't necessarily have threaded quality; they are simply pressed into the holes due to their dimensions,…
ML-120K — lightweight two-stroke gasoline aircraft carbureted engine (12 hp), manufactured by JSC “Motornaya Lavka”. Applications: • entry-level ultralight aircraft • small fixed-wing UAVs • motorgliders and experimental aircraft •…
The Worker Kunlun Trigger Short Stroke + Safety Delete is a drop-in part for the Kunlun Bolt-Action Blaster that reduces the pre-travel of the trigger before it engages with the catch. This allows for a snappier, more responsive trigger…
NK stroke coach back cover, it is tight fit so you will need a screwdriver to put it in place. Better print it from PETG, PLA works too but wont last as long, if you dont have original sprint just pu a piece of foam there. This is the…
REV UP for My lastest Engine model, The Single Cylinder 2 Stroke Piston Engine. This model serves as both a learning/educational model, and a design for enthuisists. You can choose between a fidget crank case, or a descriptive model with…
I wanted to design a four-stroke engine model on my own :) All you need is a 3d printer and some adhesive. If you want to you can use two or more cylinders in a series switching to create an in-line engine. The best example would be the…
I've created this holder, to look like a cooler for great models of @Bootjevaarder: https://www.printables.com/cs/model/379935-4-stroke-flathead-boxer-engine https://www.printables.com/cs/model/144943-constant-mesh-two-speed-gearbox Easy…
Saab 96 two-stroke keychain. Plain and simple. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Filament: Addnorth PETG Category: Keychains
Compatible with Cooler Master's MasterLiquid 240 Atmos & MasterLiquid 360 Atmos. The inspiration comes from a two-stroke moped cylinder Please note: Do not print the part with a 0.6mm nozzle like I did. This is definitely too big for it.
The Vesper Trigger Short Stroke is a drop-in mod part for the Hare Tech Vesper Brushless Flywheel Blaster that reduces the pre-travel of the trigger before it engages with the firing switch. This allows for a snappier, more responsive…
Fuel line grommet for 2 stroke (and 4 stroke?) engines usually found in cheap weedeaters and other garden equipment. Modelled after original NAC weedeater grommet with 19 mm but it should work with 20 mm openings too. Hole and line seal…
ML-80K — compact two-stroke gasoline carbureted (optional fuel-injected) aircraft engine rated at 5.5 hp, manufactured by JSC “Motornaya Lavka”. Description: • compact carbureted engine (fuel-injected version available) • designed for…
3D printed parts of Computer controlled stroke position system. We use the positional system in our laboratory to test an experimental microwaves system for the detection and classification of strokes in pre-hospital care. More…
The main purpose of the device is to aid people who had a stroke to regain mobility in their arms. Over the course of several 10-minute intervals with the device throughout the day, it aims to aid users in regaining full mobility in the…
I have a 2016 ktm 300xc and needed a radiator fan. The standard one that uses the Spal 30103018 does not fit on my Emperor radiator braces as it's too big. (https://www.emperorracing.com/product/radiator-frame-1803/) I found a smaller DC…
This rework of the Mercury fuel cap allows you to pump petrol from a distant tank whilst underway. You can't over fill the tank as there is a return line attached to the external tank. A few pumps every so often will prevent that horrible…
More of a fidget version of my first engine model. The angle of the cylinders is 67.5 degrees. Print in the way the files are arranged. Comment if you want a new engine and what model i should make.... maybe one with a camshaft??? Post…
Bei Bedarf im Slicer einfach die letzten Schichten (ab den Zahlen) in anderer Farbe drucken. Die Pins evtl. einmal mit der Zange ganz rein und raus drehen, damit das Gewinde frei wird.
For all the Two stroke fans. All my pistons are dirty and weren't tall enough for pen, so I made this. I printed it at 15% infill 0.20mm no supports. Just rotate the top down.
Set of 2 plungers, shortens the draw to ~3.5" and ~2.75". The long screw version is for 1"/25mm long #4 or m3 screws, but there's a version that uses regular stock ontos screws, but then you'll need a longer allen key possibly to install…
This is a simple dual-slide movement demonstrator. This is essentially the same motion the cylinders in a V-configuration, four-stroke engine make. To build, you will need to print: (1) Base, (1) Thumbwheel, (2) Conrods, (2) Slides, and…
I had one broken end stroke so i made a replacement, it is sized to let through the original 6 mm bolt and fit the relative nut inside (all quite comfortably) I used petg and 100% infill since it was the toughest stuff i had around and by…
i made with tinkecad
Update: added 2 new cups with an elliptical profile that provides easier pouring. Two measuring cups that allow you to precisely measure enough 50:1 oil for either 1-gallon or 2-gallons of fuel. FreeCAD models are included should you want…
WORKS WITH VORSK HI CAPA As i know Vorsk is WE based so should work with WE as well I guess it can be install on other too ID 8mm OD 14mm
Spacer under fillipi wing, stroke side This is ment for 8+ or other single oar boats.
-- ENGLISH -- Measuring cup for two-stroke oil for use on the go, with a 2% or 2.2% mixing ratio (equivalent to 1:50 or 1:45) When refueling, fill the two-stroke oil up to the mark indicating the gasoline amount and add it. Ideal for…
Gasket files for intake, NT carb and magneto. The clutch cover is not in dxf but can be traced from scanned file Enjoy! Let's make parts available for everyone.
Background: This is part of a much bigger system design which is detailed here: Mountain Bike Data Logger Update 7-26-2026 : I put a rib on the top strut piece of magnet mount to stiffen vertically. I noticed a 45Hz peak in the…
Update 2026/8/8: I added a gusset where the circular part transitions to the downtime of the magnet mount. I noticed a small crack and a lot more flex. Maybe due to a crash but was an easy fix to make stronger and still clears the ribs in…
Custom Stroke Dice — d20 + d6 Two dice numbered in a custom stroke script rather than digits. Each face carries a centre line with strokes cut across it; where the strokes sit and how many there are gives the value. You do not memorise…
Yamaha 2-Stroke Outboard Remote Control Cable End Replacement end fitting for the remote control cable on Yamaha 2-stroke outboard engines. This part is designed to fit certain Yamaha 2-stroke outboard models, potentially including the…
This is a CUSTOMIZABLE 4-stroke single-cylinder engine teaching model. It is built from a short TrueGeometry Playground recipe, so you can change the scale (S) and the radial clearance (CLEAR, in mm) and rebuild it in a minute. Each unit…
This is a CUSTOMIZABLE 2-stroke inline-twin engine teaching model. It is built from a short TrueGeometry Playground recipe, so you can change the scale (S) and the radial clearance (CLEAR, in mm) and rebuild it in a minute. Each unit also…
This is a CUSTOMIZABLE 2-stroke flat-twin (boxer) engine teaching model. It is built from a short TrueGeometry Playground recipe, so you can change the scale (S) and the radial clearance (CLEAR, in mm) and rebuild it in a minute. Each…
This is a CUSTOMIZABLE 2-stroke inline-four engine teaching model. It is built from a short TrueGeometry Playground recipe, so you can change the scale (S) and the radial clearance (CLEAR, in mm) and rebuild it in a minute. Each unit also…
Rudimentary manual counter from 0 .. 9. Compact design with 4 printed parts and a small metal coil spring (5.5 x 8 mm). Take the spring from a pen and cut it to length if you don't have suitable springs lying around. Print comments: Flip…
Disclaimer – Experimental 3D-Printed Part IMPORTANT – READ BEFORE DOWNLOADING, PRINTING OR USING THIS MODEL This 3D model is provided for educational, experimental and personal prototyping purposes only. The adapter bracket is designed to…
