Liczymy pasujące modele…
Modern Halloween Pumpkin decoration. The model is 90 mm tall and 123mm wide, the standard model can be scaled up to your liking and scaled down to about 75% and still print fine and fit a standard electronic tea light. I also included…
UPDATE!!!🎃🎃🎃 You can now download a new version of witch hat: MadEye Hat! Downlaod from HERE Pumpkin Venom - No AMS is LIVE NOW! Patreon.com/DraftAxis for EXCLUSIVE content and COMMERCIAL license ✨ Meet the Grumpy Witch Hat! 🧙♀🎩 This…
Pumpkin model as tealight holder Be carefull with ussing candles, for safe use led lights candles Printed with 0.6 nozzle Layer height: 0.25 3 bottom layers, 3 top layers
Each part was printed with 2 walls, 5% infill, and a .2mm layer height.
Hi Folks, We may not be fully in the Christmas season yet, but many of you are already starting to plan and produce for the holidays. So, it’s time for Deltaprints to start ringing those Christmas bells as well! 🎄 Over the next few weeks,…
Modern easter egg decoration. Large egg is compatible with tealight (use light or transparent filament. Both sizes should be printed in vasemode. The large egg is 129 mm tall and the small one 90 mm. If you want to support me or get…
Christmas tree ornaments for vase mode printing. When using light or transparent filament you can use a tea light to lightup the tree. The big tree is 150 mm tall and the small tree 100 mm You can get a permission to commercial use of…
Set of Hexagonum flower pots - 3 sizes S/M/L) with tealight. Pot sizes: small - 59.94mm height medium - 79.98mm height large - 104.84mm height Tealight size is 31.17mm Pots have a closed bottom. No special instructions to print. However…
Tall Pumpkin for halloween decoration. The model is 160 mm tall and 84mm wide. The body and stem are seperate bodies to make it easy to print in two colours, you can simply glue the stem into the pumpkin body. The inside of the model is…
These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad This is a semi-realistic Christmas tree that can be…
We’re kicking off this year’s Halloween season with a cute little ghost. The model is simple to print, requires no supports, and is compatible with an LED tealight or a small light source that can easily be placed inside. The model has…
A beautiful ribbed tea light holder. It is suitable for standard tea lights up to 40mm in size. If you want it to be larger, simply scale the holder. It is recommended to only use LED tea lights! 🚀 Support My Work & Supercharge Your…
TL;DR A little fast printable moon lamp cover to put over a cheap LED-Tea-Light. Mentioned on YouTube: Many thanks to Chris for presenting the model in his nice channel. More stuff for IKEA moon fans:…
Acorn autumn decoration. Available in large and small size, large is 150 mm tall and small 104 mm. The inside of the bottom is hollow to save on filament and to allow an electronic tea light to shine through when using translucent…
A delightful, miniature Gingerbread House decoration, printed in white PLA. This piece is designed to evoke a warm, festive feeling, reminiscent of classic Christmas holiday sweets and winter nights. The kids love it.
Modern and minimalistic Santa decoration, fun and stylish deco for this year's christmas season. All parts can be printed seperately, no need for MMU. The body of santa has a hole on the bottom to insert an electronic tealight, which will…
The hole for the tealight has a diameter of 38mm. If you have a different sized tealight, just scale it up/down! Enjoy this model and leave a photo of your print! 👻👻👻
A great ribbed round tealight holder that is available for download in three sizes. Depending on the size, suitable for 40mm, 50mm and 60mm tea lights. It is recommended to only use LED tea lights! 🚀 Support My Work & Supercharge Your…
The autumn season is slowly approaching, and of course, there will once again be seasonally themed models from Deltaprints this year. So, let’s get started with a charming little pumpkin tealight holder. This model is quick and easy to…
The Christmas lantern consists of two parts, which are printed in place. The inner part can be rotated so that the LED candle can be placed inside the lantern. The snowflakes are embossed in a way that allows the light from the candle to…
As the MOON CITY 2.0 creation by Kijai https://www.printables.com/de/model/218224-moon-city-20/comments is very well known here is a little LED tealight stand for the modell. It is an oval plate with a center hole matching the tealights…
Cat and dog ghosts for Halloween decoration. Can be illuminated with LED tealights or using glow in the dark filament.
This time I present you Christmas Tree in voronoi style that creates really wonderfull Christmas atmosphere. I have remixed it to be voronoi and added tealight holes at the bottom. You have 2 sizes to choose - 10 and 15 cm. Also there are…
https://www.buymeacoffee.com/maxt ---------------------- UPDATE 19TH JAN 2023: A new version has been uploaded. I fixed some bugs with the model, and I've added extra supports, for example to one of the internal arcs inside of the model -…
Enjoy printing :) Disclaimer: The individual who 3D prints this model is fully responsible for the choice of materials used. Ensure that appropriate heat-resistant materials are selected, and never leave the tealight unattended while…
Bring Halloween to life with this 3D printed jack-o’-lantern pumpkin tealight holder ! Designed to fit standard LED tealight candles (safe, no flame), it glows through its sharp eyes and jagged mouth, making it the perfect decoration for…
Check out: my Instagram to see the tealight Print with a low temperature (195C) to avoid stringing otherwise standard print settings. Made for tealights with 39.5 mm in diameter
The Unholy Six Collection A collection of legendary horror icons from the 80s and 90s – now immortalized in plastic. Six figures that turned nightmares into blockbusters – and now peacefully hold a tealight. printed on Prusa Mk4 and Bambu…
A cobra coiled around a tealight well with its hood flared over the flame. The light catches the underside of the hood and the scale texture on the coils, and throws the snake's shadow out across whatever it is sitting on, which makes it…
Printed on my Creality Ender 3 S1 with following settings: Mode: Vase mode Layer height: 0,16 mm Material: White PLA
best to print it with 0 infill
Very easy print. Standard print settings, just dry your filament and print at 200 to avoid stringing.
A minimalist octopus-shaped tealight holder. A real eye-catcher in your living space. Quick and easy to print. Fits standard 40 mm tealights. (Freely scalable) The standard dimensions are 160 mm x 131 mm x 83 mm . Printed with the…
Whether as a gift for Valentine's Day, or just because... The "Two Hearts" tealight holder brings harmony into your home. The tube of the tea light holder is intended for standard 40mm tea lights. (The use of LED tea lights is…
A modernly shaped holder for LED tea lights. A rounded shape with vertically extending ribs. Easy to print without supports. The standard dimensions are 71 mm x 71 mm x 55 mm . Printed with the following settings: Layer Height - 0.2 Walls…
A play of light and shadow, kindling for whimsical fables. Open source version of https://cosmicjubilee.com/designs/twinkling-bloom/ - available to buy now! A tealight holder with delicate tendrils growing from its base, designed to cast…
Hangover Buddy The Morning After, Doggy Style! This 3D model captures a dog having a seriously rough morning, perched on the toilet, cigarette dangling from his mouth, questioning life choices. But don’t let his expression fool you – he’s…
I made adjustments to my original design, changed the faces and made them more round and pumpkinshaped. It's now easier to print and there are no supports needed. I recommend using brim inside and outside with 5 line counts minimum. Cheap…
This is a remix of the Rust Furnace from https://www.thingiverse.com/thing:2951215. I modified the bottom hole to be 1mm larger to accommodate most LED Tealight Candles. Some Tealights from Amazon and Hobby Lobby did not fit the original…
The 4 elemental stones from The Fifth Element movie Tealight candle holders. “Life size” Measures 24cm high so would require a printer capable of printing that high unless you split the model in half and glue together. Would require…
This unique Easter egg decor is compatible with tealights up to 40mm in diameter. I designed these to specifically print well in PETG, so PLA should be a breeze. The optional base has a spot to recess a tealight into and provisions to…
Because i like vase mode prints :-) here the remix of the LEGO like skeleton head. You can use it as candle light holder for a LED tealight(70% version) or as decoration for halloween. With the vase mode / spiralized print it will have no…
This is my first creation for Halloween, Just something simple to light up the dark. It is possible to print with minimum supports using supportblocker. 08.09.2022 - Pumpkinwithoutface.stl Added file without face if you want make your own…
Introducing the Modern Torus Tealight, a stunning fusion of form and function. Crafted in the iconic torus shape (I live up to my user name), this tealight exudes contemporary elegance. Intriguing extruded lines adorn its surface, adding…
Here is my creepy Halloween Tree Monster. In the original scale you can put it over an LED tealight with 40mm diameter or to put a fairy light inside (with cutout for the wire at the backside). Its made for easy printing, but you will…
This set of modern Easter egg tealight holders creates a warm and cozy atmosphere when used with LED tealights or small candles. The organic egg shape combined with the open lattice structure produces beautiful light patterns, making them…
This versatile design can be used as a small planter for succulents, or a dramatic electric tealight . The design features a realistic skeletal hand cupping a sturdy. Avoid using regular candles with flames, as they can melt the PLA.…
PRINT IN VASE MODE / SPIRALIZE OUTER CONTOUR This simple and elegant Christmas tree is designed for vase mode printing, making it fast and easy to print. Perfect for holding a small electric tealight at the base, it casts a soft glow…
All files are suitable for LED tealights with a diameter of up to 40 mm. Small: Height: 30 mm Medium: Height: 45 mm Large: Height: 60 mm Set of 3: Includes all three candle holder models in various heights.
Multi piece tealight holder for "standard" small candles (~4cm radius). Pieces can be stuck together but I recommend glueing them to make a full top part. Cap part is optional, circle gap in the middle avoids possible deformation by heat…
These are 80mm diameter spherical lithophanes lit by tealights. There are 4 scenes and two hole sizes ( 35.7mm and 29.6mm ) for the tealights. Each one takes a little over an hour to print (on a Bambu X or P series). I have included both…
This stylish pumpkin Halloween decoration looks great during the day and creates a mysterious atmosphere when the lights go out. Simply place an LED tea light in the pumpkin and enjoy the flickering shadows through the voronoi pattern.…
A sturdy dragon tea light holder that is easy to print.
Coziness with a tealight flower The tealights should preferably be LED There are three printing plates for the leaves, inner (7 pcs), middle (9 pcs) and outer (11 pcs). If you want, you can print in different colors! Then just press the…
A mystical loom weaves resplendent spiraling pleats from the very fabric of light. Open source version of https://cosmicjubilee.com/designs/pellucid-sweep/ - available to buy now! A tealight holder whose base gradually develops into a…
A slice of lunar surface with craters, ridges and dust ripples across the top, a small astronaut figure standing near the edge, and a recessed well sized for a standard tealight. With a candle in it the crater walls throw long shadows…
Valentine's Hearts Tealight Holder
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) Abstract Christmas Trees –…
only use battery-powered tea lights!!! No fire The overhangs on the roof require tree/organic support I used: Prusament PETG white Updated file: better transition between house wall and roof. there were problems with the hold of the…
Spooky Knit Ghost LED Tealight Holder Get ready for Halloween with this adorable yet spooky ghost! This model is designed to hold a standard LED tealight, casting a warm, eerie glow through its charming knitted texture and glowing eyes.…
Tealight Christmas globe Are you looking for a design Christmas decoration or ornament that is easy to print and yet will get everyone excited? Here you have it! Print this gorgeous M size ornament as a stand alone decoration or print the…
Made for Hallowe'en decor, they make a great little LED tealight display or a planter for small plants such as succulents or cactus. Printed on AnyCubic Kobra Plus, sculpted in Nomad Sculpt on iPad Pro.
I printed them all with 0.15 layer height with a 0.6 mm nozzle and with 5 different matt PLA filaments. Print time with those settings are between 9 to 12 hours each, so if you don't might a rougher surface look, feel free to use a higher…
This is a simple Death Star for LED tealights with a bottom part and a top part. This can be printed with 0.16 layer height and an infill of 10-15%. No supports needed.
Print with PLA and 0,2 Layer height. Add Brim. No supports. After print: Remove Stringing with lighter or heat gun. Be careful! Brush remains with toothbrush. Remove brim or thick strings of filament with cutter knife. Use ONLY LED…
Lithophane tealight holder I modeled with inspiration from sestosanto on myminifactory . I made the gap between the candle and the image smaller because I found it wasn't lit up enough for my liking (the melted top of the lithophane in…
It's sort of amazing what you can do with a hunk of plastic: In this case, 3D printing a massive peony tealight. It comes in two parts: stamens and petals. In this case, I've printed this in clear(ish) ABS, though you can get a similar…
Made for 38mm diameter tealights. Standard print settings. If you like the design. Check out this salt bowl: https://www.printables.com/model/1135479-greek-pillar-table-salt-bowl-with-spoon
Do NOT use with fire. This Jack-o'-lantern design is based on my other model and can be found here: Ghost Pop-up Jack-o-lantern - Halloween Pumpkin Notes: Small Jack-o'-lantern electric tealight holder for approximately 40mm Print and use…
Tealight lithopane stand I uploaded a modular and customizable lithophane lamp: https://www.printables.com/model/222458-customizable-and-modular-lithophane-lamp In case you want to change a single lithopane on that lamp, I designed this…
🌋 Volcanic Tealight Holder – A Warm Eruption for Your Desk! A miniature natural wonder that instantly transforms the atmosphere of your home or office! When paired with a standard LED tealight, this Volcanic Tealight Holder creates a…
I got the best print result with a perimeters of 1, since PrusaSlicer adds the solid infill to print the inclined walls. I also used a layer fin layer height of 0.15 mm with a 0.6 mm nozzle. No support needed. The candleholder is safe to…
Screaming ghost made for LED tealight. You can also print using glow in the dark filament.
The design is available in three variants: Large - LED Lamp Kit: The original full-size version, designed for a proper LED lamp module. Best print quality and overall lighting experience. Medium - LED Candle / Mini LED: A smaller version…
This lovely house is a perfect decoration for your home. You can put it just like that or light it with an electric(!) Tea light or a small string of lights. The house has a recess on the back for this purpose. The house has the following…
Print with a low temperature roughly 195C
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) ADVENT CASTLE – A Cozy LED…
orbs · tealight modern minimalist orbs for tealight with twist lock · different orb and bottom options available there are 3 orbs and 4 bottoms for you to choose from, divided in 2 profiles (one for the orbs and another one for the…
Illuminate your space with a touch of winter magic with this snowflake tealight holder! Designed to mimic the delicate beauty of a snowflake, this model adds a cozy, festive glow to any room. Print settings 0.2mm layer height works well…
SPOOK Technology This version of danielolivier's pumpkin features the new SPOOK™ ( S cary P rintable O rnament O ptimization K it) technology which made it 80% scarier for adults* *results may vary How to print Use supports accordingly to…
Cute lotus flower tealight holder. Can also be used as a floating candle in a bowl of water 😊 Layer High: 0,2 mm Infill: 10% Support: Yes (On build plate only) Filament: PLA or PETG Note: Never leave a burning candle unattended!
A wonderful spheric tealight holder, with a minimalistic look. Designed in Fusion360. Print time: +-2 hours Dimensions: 6 x 4.2cm (Diameter x Height) The inner diameter of the tealight holder is 40mm and inner height is 18mm, which makes…
Moon lamp with 3.6cm (diameter) hole for a tealight. We designed this using NASA CGI Moon Kit: https://svs.gsfc.nasa.gov/cgi-bin/details.cgi?aid=4720 For this project you will need : Tealight SuperGlue Soldering kit (If you want to change…
Since the tealight height stop is at an angle, supports are not required.
Description This is a lantern model with interchangeable side panels featuring various Christmas motifs. The lantern is made exclusively for LED tealights. Do not use regular tealights! The project is very simple and consists of the main…
This is a tea light lamp. It's slightly overdimensioned. PLA is great for printing the lamp. For use with a real teal light candle I recommend the separate tea light holder. It protects the lamp from the candle's heat and also adjusts for…
Hallo, ich “musste” meine Frau aufgrund einer etwas größeren Filamentsammlung…etwas Beschwichtigen. Habe etwas mit Fusion rumgespielt und das ist dabei rausgekommen. Das ganze kann ohne Supports gedruckt werden. Ich habe die besten…
Remix of Bugman_140's Modular Lamp Cauldron. I made it smaller and modified it so it would house a 37mm LED tealight. the base is now separate legs that glue on.
A simple Christmas tree that can be printed in vase mode including the gaps, which would allow the light from a LED tealight to escape creating a special effect. The gaps and a small hole at the top may also serve as mounting points for…
Set of Octagonum flower pots - 4 sizes XS/S/M/L) with tealight and vase. Pot sizes: extra small small medium large Pots have a closed bottom. No special instructions to print. However pots are designed to be very solid and watertight.…
✨ Bring Minecraft Redstone energy into the real world! This mini lantern is designed specifically for the Bambu LED tealight. The model is made of 3 parts : Base – holds the tealight (press-fit) Shade – inner diffuser (gives that warm…
After making Makies Jack-O-Lantern for my wife, my son decided he needed a happy pumpkin. I remixed Dennis' Halloween Pumpkin light, removing the stand and adding a solid bottom for a tealight to sit on. I stuck Makies stem on top.
Remixed the Original to fit an electrical Tealight right from the get go the hole is 38mm in diameter. This fits a normal and an electrical tea light. I recommend a brim and Support at least for the inner top part, because the overhamgs…
A valentine's lampshade! Use an electric tealight only. 2 variants are provided - one with a heart cutout on the top, that will cast a big heart on the ceiling, and another with a flat top for full effect to the sides.
Multi piece tealight holder for "standard" small candles (~4cm radius). Pieces can be stuck together but I recommend glueing them to make a full top part. Cap part is optional, circle gap in the middle avoids possible deformation by heat…
Hi! Christmas is coming and we needed some decoration for our house - this was the result. Something minimalistic but still beautiful. Both sizes of the house are capable of using some LED candlelights inside. The tree can be scaled, left…
Introducing the "Cute Bunny LED Tealight Egg" – where Easter meets elegance in the most charming way! This enchanting tealight egg boasts a delightful surprise: nestled within its shell is a sweet silhouette of a bunny, casting a soft…
🎅 Santa Claus Christmas Decor Scene – Part Two! Following the recently released Christmas Decor Scene , here comes the second part! This time, it features a friendly, waving Santa Claus with his classic red hat — a perfect companion piece…
This detailed snow-covered winter cabin brings a cozy, festive atmosphere to any space. The house features a classic log-style design with snow-laden roof details, balcony, porch, and surrounding pine trees. The interior is hollow and…
LED tealight holder in the shape of a dragon's head, the tealight is placed directly in the mouth. Fits standard size (max - 37 mm diameter) tealights , but you can make it even bigger. Warning! For the default model size, only a tealight…
