54 modeli
I was looking for a really good spool guard for my Protopasta filaments. I came across this one that was near perfect. I wanted it to have flat edges instead of the tapered ones. So I cut the taper off. I also wanted it to fit better in…
Wydruk około 5,02 €–6,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
In celebrating spring, Corey Marchetti of CM Designs curated a very special design for our fellow gnome lovers. This fun, flexible gnome has floppy feet for your enjoyment. Shown in Protopasta's new April Endless PLA colors: Partly…
To get that Protopasta.com look. Great test print for metal finishing. Enjoy all the colors & finishes at all angles!
This adapter system wraps the edges of a PROTOPASTA 199mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable PROTOPASTA nameplate…
Each spool needs 2 rings. Tear the cardboard sides off the original protopasta spool and insert the adapter into the center of the spool. I added a dab of glue where the adapter touches the cardboard center to keep the spool from…
This adapter system wraps the edges of a PROTOPASTA 203mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable PROTOPASTA nameplate…
In celebrating coffee, Corey Marchetti of CM Designs curated a very special design for our fellow coffee connoisseurs. This beautiful pour over station has a place to tuck your Hario V60 Paper Cone Filters (or similar) and is height…
Don't go light on the perimeters or infill. You want this sturdy.s
This is a spool holder to allow the Protopasta filament rolls to fit into the bambu labs AMS. I remove the cardboard pieces on the outside of the protopasta roll and press these on each side one at a time. So far they seem to work well…
We designed a pasta themed clicker! Print Settings Rafts: No Supports: Yes **Resolution:** .16-.2mm Infill: 10-15% Category: Mechanical Toys
We hope this fun lamp design brightens your day! 3 lamp shades provided for your enjoyment and to demonstrate what's possible. Design your own lampshade following this tutorial: https://youtu.be/MGb4gvUI7M0 Lampshades are 3D printed with…
Our original gnome mascot from the mid 2010s with our hex P logo introduced in 2020 on his back. A great benchmark part!
Print with spiral vase mode for a clean, continuous single wall.
Designed to friction fit with center, protect edge, and leave corrugation exposed to store filament when not in use.
Print with spiral vase mode for a clean, continuous single wall.
Unfinished project of Czechoslovakia amphibious armored personnel carrier OT 62 Topas. Scale is 1/10. I intended use 3d printed water jets. I hope someone will finish it.
Filament got tangled in the 4 mm gap between the cardboard core and plastic ends when it was being used in the AMS so I added a 2 mm flange to the insert adapters so that the filament can't get caught in the gap. This is for the 1kg…
I like labels. The original model works great but doesn't have a space for a label. I have too many 500g spools to remember what’s what (thanks to the Endless PLA Filament Subscription) so I added spots for labels. I remixed the original…
I like phone cases with a good grip so your phone can't slip out of your hands. Therefore, I remixed oryweaver's case and added the pattern of my vintage SMS Sarosil Topas cutlery and made some other small adjustments. Print instructions…
This remix allows you to transfer your Protospasta 1kg cardboard spools to fit on to your Bambu reusable spools in a more fashioned fit without the use of glue and includes a support ring if wish to choose to add more support while spool…
I liked the original, but I was feeling pretty impatient about printing it. So I spent some time while the first side was printing tweaking the print settings (see the attached 3MF), and also carving out the speed holes to be even wider.…
Inspired by the sea, this bottle is thoughtfully designed by Corey of CM Design as a solid with all features at a minimum 45 degree slope to help ensure success when printing a single wall with 0% infill. Choose spiralize (vase mode) for…
Another in my spool insert collection. It really helps the cardboard spools roll easier. I recommend printing each part separately to avoid any blobs or stringing. If you like it please leave a comment, like, or make. No need to tip, just…
Insert for Protopasta's cardboard filament spool allowing it to run more smoothly over spool holders. There is now a version for the 500g spools. The parts should screw together tightly so there is also a model with looser tolerances.
Inspired by the sea, this bottle is thoughtfully designed by Corey of CM Design as a solid with all features at a minimum 45 degree slope to help ensure success when printing a single wall with 0% infill. Choose spiralize (vase mode) for…
Printed in Protopasta HPLA with default Prusa PLA printer settings.
Inspired by the sea, this bottle is thoughtfully designed by Corey of CM Design as a solid with all features at a minimum 45 degree slope to help ensure success when printing a single wall with 0% infill. Choose spiralize (vase mode) for…
isosahedron (the polyhedron used by protopasta to show off filaments on their site)
Small test print. Same size as hex P on Protopasta retail boxes found at Microcenter. Use to test 1st layer & extents.
Inner cylinder has a 53mm OD and is designed to fit 53mm Protopasta spool side openings. Outer cylinder is 205 OD and designed to fit 203mm Protopasta spool side edge. For both, I recommend printing in spiral (vase) mode with a 1mm…
Gloop and Protopasta merged together to form a special collab for the February Endless PLA Subscription! We made this fun sculpture to celebrate this collab! Learn more about this collab here: Gloop x Protopasta Print Settings Rafts:…
How cool would weathered garden signs 3D printed with Protopasta Iron be? Corey of CM Design ran with that concept to create three wonderful signs that you can download for free. More about Protopasta x CM Design Collaboration at…
A big theme at ERRF 2023 for Protopasta was Jurassic Park! They were giving these magnets out at their table, if you missed out and wanted one, here you go! Push one 10x5mm magnet into the back and slap it on your fridge
This is a simple inner ring adapter for the ProtoPasta cardboard spool, which reduces friction during rotation on a center rod for auto-rewinders and similar devices. MAKERS: Please post a picture with comments here of any prints/makes…
Mount an esp32 camera module on a "Topas Sonic" water meter to read the value with "AI on the edge" for "Home Assistant"
8/1/23: IMPORTANT: If you are printing new spools instead of printing the original model and printing this model to hold the weight, I strongly recommend looking at this model: Proto-Pasta AMS Spool Adapter with Centering Disc for Silica…
How cool would weathered garden signs 3D printed with Protopasta Iron be? Corey of CM Design ran with that concept to create three wonderful signs that you can download for free. More about Protopasta x CM Design Collaboration at…
For Printopia 2024 we had a Starwars and Spaceballs theme. So I designed a thumb lightsaber arena to battle with the Printopia visitors! Print Settings Supports: Yes Resolution: .15mm - 2mm **Infill:** 15-25% Filament: Protopasta HTPLA…
Not durable for long-term use, but woks great as a disposable toothbrush for camping or travel. It prints quickly and easily, and doesn't need supports. The narrow tube for the toothpaste to flow doesn't clog or dry easily, enabling easy…
Protopasta Hex P logo mark design for wrangling sharpies, markers, pens, & pencils. Print in spiral vase mode w/ 1 wall.
Print in metal for a nice, weighted feel. Oxidize or polish for unique finish. Simple paper weight w/ slot for postcards
How cool would weathered garden signs 3D printed with Protopasta Iron be? Corey of CM Design ran with that concept to create three wonderful signs that you can download for free. More about Protopasta x CM Design Collaboration at…
For ERRF 2023 Protopasta went all out with a Jurassic Park theme! These are the keychains they were giving away at their table.
Customized version of https://www.thingiverse.com/thing:3346069 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3346069 Instructions Using the following options: textstring1 = ProtoPasta textsize_upper =…
its a coaster do you need a description? If you do you probably shouldn't be 3D printing… picture is the logo version, coaster version the P is recessed.
“The Logo” Pure Reality Other Than Opposing People And Suffering The Anxiety Scale it as you wish, this is a large one. be mindful of Z height.
Remix of @AnkleKrisCreations spool holder , with an extended base to fit the 14.5mm wider, 1kg, cardboard spools from ProtoPasta when using @StrandedOrg Proto-Pasta Spool Saver inserts. I'm also including the reverse-engineered FreeCAD…
Outer ring has 96mm wide diameter w/nubs so the cardboard inner ring won't slide on the plastic ring. Inner ring 82.5mm.
My 500g cardboard spools kept getting bucked off of the Bambu AMS during printing. So I threw this together to hold desiccant or some weights, or you can just put whatever you want in it. Works great with the AMS so far, I live in a humid…
Print twice for one 500g spool at any layer height Instructions: Peel/tear off one side of the filament spool Use a blade to remove the extra glue at the edge Press-fit one adapter Flip over and repeat
Customized version of https://www.thingiverse.com/thing:3346069 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3346069 Instructions Using the following options: textstring1 = ProtoPasta textsize_upper =…
Customized version of https://www.thingiverse.com/thing:3346069 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3346069 Instructions Using the following options: textstring1 = ProtoPasta textsize_upper =…
Customized version of https://www.thingiverse.com/thing:3346069 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3346069 Instructions Using the following options: textstring1 = Proto Pasta textsize_upper…
Protopasta cardboard spools are less to be desired and i had a couple sunlu reusable spools laying around so i made this adapter to fit protopasta onto a sunlu spool. 5% infill May require deburring of glue left on cardboard center.
