Liczymy pasujące modele…
Printed from with Flexafill 98A In my opinion/experience it should have vertical orientation with organic support touching only bottom side so the top side ( visible one ) will be smooth As always with TPU, print slow. I went 20 mm/s.…
This 3D model captures the transition from 2024 to 2025. It is a dynamic and creative representation of time flowing into the New Year, perfect for table decorations, New Year parties or as a symbolic gift. It's easy to print, you don't…
Transition plate for sensor offset along the Z axis One M3 nut and two 8mm M3 bolts are used for connection
Using dricore subfloor in the basement causes there to be a big heigh difference in transition in some areas where the floor is direclty applied to the concrete. Big box stores don't sell transitions that can cleanly handle these heigh…
reduction/pass through the enclosure wall for example for this heater: https://a.aliexpress.com/_mPlGPcS I didn't want the heater touching the wooden wall. So I created a reduction and at the same time a passage through the wooden wall.…
Inexplicably, Thule doesn't include an adapter for 12mm thru axles with the Roundtrip Transition hard case bike travel box (even though it's available as an accessory). This part solves that missing item. NOTE: This only fits the…
For my needs, I wanted a PVC connector that didn't have an inside ridge where the PVC and connector meet. Most off the shelf connectors seemed to ignore this so I modeled this. Might need to do a fitting print of just the end before…
A transition pice I designed to mount a 40mm Noctua Fan onto my hotend and replace the original 30mm fan. Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: Doesn't Matter Supports: Yes Notes: I printed it with two support…
These 4-way connectors were made for Mattel Pixar Cars track sets. There are two different models included here. One of them has the New (2023+) smaller track set connectors on all 4 sides. The other model has 2 adjacent sides with the…
Print with 100% infill, so it is sturdy outside, preferably in PETG.
Witness the magic of transition with our latest creation, 'Heartfelt Transition 2024.' Admire the sleek design showcasing the year 2024 on one side, but the real enchantment happens when the clock strikes midnight. Gently turn it over,…
transition batery parkside X20V to drill Metabo BZ12SP print: pla in the future I will also complete the project
modified the prusa mk3/s psu plastic piece to gain me a little more clearance when im doing side transitions for mmu prints with my palette2 on the right side of the bed. this gains about 2 to 3mm more in the x direction. Print…
This is purely a cut and paste remix to allow for transitions between slope and cliff on linear pieces, not as well done as the originals but made with sculptures by the original creator so the level of detail and style matches up even if…
TL;DR Fast complete 4 color transition test model to demonstrate the print quality and speed while going from any of the 4 colors to any other. updates 2026.0621 added Elegoo Centauri Carbon2 2023.0830 added Zonestar Z9v5 M4 Collection…
I wanted a transition piece to connect a cave to a dungeon, so I combined gate and wall elements from Devon Jones’ Dungeon Stone OpenForge 2.0 set with Zach’s Stony Cave walls. Since I exclusively use tiles with a triplex base and…
A duct or pipe transition or funnel with optional mounting plate support. Parametric May select interior diameter of each end, end lengths, transition length, inner/outer taper on both ends for friction fitting. Adjustable regular cross…
A Transition for BT-80 to BT-70 for rocketry. Enjoy.
Similarly to main pivot fender that Tranisiton sells for their carbon models , I designed a 3D printed one for aluminium model. Snaps on bridge connecting chainstays. Secure with 4 zip-ties. Even if you damage the zip-ties, fender should…
This is for the Frida Baby Electric NoseFrida . The transition piece between the suction device and the interchangeable rubber tip needed replacement due to a crack in the plastic.
TPMS (triply periodic minimal surface) SSurface to Gyroid Transition structure Cylinder. 50X50X50mm Scale to size 0.2mm standard 0.4mm hardened steel nozzle Sunlu Orange Silk PLA+ printed on Bambu Lab A1 mini. Printed on Bambu Lab A1 mini.
Rough model of the transition pieces for the Estes Black Brant XII model rocket kit
The Thule Roundtrip Transition is a very sturdy bike travel hard case. Unfortunately in it's stock configuration it has only one set of wheels in the back, meaning that one has to lift the front to move it. Since the case is not exactly…
https://www.amazon.com/Raceway-Management-Channel-Paintable-Concealer/dp/B07GPFDL1K?ref_=ast_sto_dp&th=1 My wife bought this kit on Amazon and it's great, but it didn't have a transition for turning a corner AND changing walls. It has…
Rear mud fender to keep mud/rocks of upper linkage
This requires some minor separation with a razor. This is my first time designing 3D and using a 3D printer so it could probably be improved, but currently need to cut off the base ring after completion. Printer doesn't love going…
Parametric openscad script that lets you generate a transition between a larger and a smaller pipe using a half sphere.
If you change the cylinder for the Aeron chair, trim bushing often gets mangled in the process. Additionally, newer cylinders for the chair (I used part# 1B08VM, from MingYi.office store at Amazon.com) look better with a bushing that is…
This includes a complete set of cable chain transitions for the 2.2KW Round Spindle IndyMill.
Allows the use of one inch hexagon dies in a 1.5" round lathe die holder. Created the 3D printed prototype to prove the concept. Then I machined the steel part for actual use. Hardware required: Two ¼" dia set screws.
Transition from @DaHouzKats "Advanced Filtration System Adjustable Exhaust (v3) for the Original Prusa Enclosure" to 50mm PVC pipe outside of the enclosure. That way you can lead the exhaust through a window or something. Mount with…
For my needs, I wanted a PVC connector that didn't have an inside ridge where the PVC and connector meet. Most off the shelf connectors seemed to ignore this so I modeled this. Might need to do a fitting print of just the end before…
I made these pieces to better connect to rain barrels on my home. They allow standard PVC fittings to connect to standard downspouts. Printed here in PET-G with 4 perimeters
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and no external parts are needed (except for the belts). Happy printing This is a method of transmitting motion from a shaft at right angles…
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and only 3D printed parts are needed (except for the belts). Happy printing Another method of effecting the same result as No. 3 , without…
This is a fitting of sorts for a 6mm shaft/Rod to transition to a 8mm bearing ID. Category: DIY
A transition piece from indoor PVC electrical conduit to drywall. This allows for cleaner installation when running conduit into drywall - secure with drywall screws.
I have a Stihl Backpack blower and wanted to use the gutter cleaning attachment with this instead of the hand held blower. This should replace the original tip on the blower and snap into place then slide the first piece of the gutter…
My Transition Relay Carbon GX AXS eMTB did not come with grommets for where the rear brake hose or the dropper cable routed into the head tube, causing some rattling. I decided to fix that. There was a blank plug that I removed to copy…
It is a snug friction fit on the outlet, you could drill it for a grub screw for extra security if needed. I printed it in PETG for extra flexibility and some heat resistance, ABS would be good too, PLA might be a bit too brittle but post…
Káblová prechodka pre napájací kábel tlačiarne v boxe. Priemer montážneho otvoru je 32mm, aby sa tadiaľ zmestila káblová koncovka.
This is a small 40mm x 40mm x 18mm tower that helps you test and tune your plaette to change to different colors weak or strong. It helped me a bunch with setting my loading offset and Esteps. P.S. If you like my work check out more here!…
The OXO 9oz cup for kids can be hard for small hands to hold especially when greasy. This part fits between the lid and the bottle. TPU is highly recommended, printed with 0.25mm layer height, 5 perimeters, 40% gyroid infill. These…
Glue and smooth into place using paintable caulk eg Dynaflex 230. The tapered foundation should be recessed behind the trim. Paint to match the wall. Includes 2 extra variations: "Short" lacks the tapered foundation and is useful for…
This is a model for the transition between conveyor belts from a henhouse to a machine for stacking. This is specially made for an FP 102 S, but should fit anyone who uses the same type of part, don't know how many variants used it. Print…
Wall thickness 1.8 mm Printed without supports I used PETG
inner diameter 4.2mm, outer diameter 6mm printed on bamboo lab X1C
This track fits a specific type of vinyl floor transition. it is 200mm wide just print more pieces if your transition needs it.
It is a transition I made for my rocket in fusion 360 Print with 0% Infill
Ikea SESAMFRÖN to Disinfectant Dispenser Transition Kit Used with Sterillium 500 ml bottle Remove screwed Nozzle 3D printed parts: Stopper Nozzle Angle Disinfection to Pump Adaper Other parts: Tube - 6 mm outter diameter and 1mm wall Tube…
Added side supports to use the Cloweit LBE-04 inductive proximity sensor
My transition strip had a 1mm radius on one side and 2mm radius on the other, but I added the step file so you can fit it to your needs. It's a quick fix if you don't have glue or silicon. enjoy p.s. the model looks a lot smoother of you…
This can be used to transition a 4" thick wall tube (like LOC precision) to a thin wall BT70 tube (like that of apogee components) For model and high power rockets.
Assemble as shown in picture
Stackable organizer for voron cubes but with better tolerances
Description: Tired of the "death hum" of an Aquael Pat Mini vibrating against your aquarium glass? This 3D-printed transition block allows you to mount the Pat Mini head onto an SF Bio Filter (S) body, giving you a dual-sponge mechanical…
May work with other bikes from the Tranzition
Minimal reinforced transition for the American Rocketry Challenge (ARC).
In Folge einer abgerissenen Lasche(nhalterung) vom Deckel ("Sollbruchstelle") des Thule RoundTrip Transition Fahrradkoffers, habe ich zwecks Reparatur eine an den Deckel anzuklebende Manschette angefertigt. # Benötigt/Empfohlen zur…
These are transitions printed for a friend who designs and launches very large rockets. I'll post a picture of the finished product here when done.
Transition piece for Tulpig bathroom fan 150 mm to 120 mm ventilation hose Printed in PTEG with 3 perimeter/wall shells, 15% infill and support from the buildplate Like and download to support, and if you enjoy my work and want to see…
rear mudguard for transition patrol carbon 2026, Printed in TPU, Mounted with zip ties
Transition piece to put any length of 16mm PVC on your Dyson V10 (and beyond). Ideal for radiators and other tight spots. The connector is compatible with Dyson vacuums, but in design optimized for 3D-printing. Seperate connector is also…
This is a flat flooring transition strip used to transition flooring of the same height but differing colors/styles, for instance vinyl plank flooring where it meets other vinyl plank flooring of a different style. To fit on small print…
Designed ABS Plastic Transition Box with 5" Ring Back
6 inch gated pipe irrigation transition to 3/4 inch female threaded to receive filter/reducer feeding drip irrigation
it is transition conduit for wall holes.
Needs 775 motors (FOR CONSTRUCT, I HAVE ALL THE PARTS NEEDED) , and an assortment of M4 screws
Inner diameter - 19.5 mm Width of walls on the inside - 1mm Diameter of hole for cables - 7.5mm Holes for M4
I was annoyed by the edge of the floor tiles I got off ebay. The tooth profile and the height are customisable in the openscad file. It's parametric so cusomisation should be easy. Print some test pieces before committing because every…
This model captures the rugged aesthetic of a Transition-era unit coal hopper with its tall steel body and three discharge chutes. It features detailed bogies and a realistic profile for freight collection displays. Print with supports…
Added side supports to use the Cloweit LBE-04 inductive proximity sensor
Transition piece to put any length of 16mm PVC on your Dyson V10 (and beyond). Ideal for radiators and other tight spots. The connector is compatible with Dyson vacuums, but in design optimized for 3D-printing. Seperate connector is also…
