Liczymy pasujące modele…
This construction holds 70 pcs of the (IMHO very nice but) fairly inexpensive Ohuhu acrylic marker pens that can either be ordered straight from the Ohuhu website or Amazon and similar sites. Be aware that you'll need 850+ grams of…
Small shelf/organizer for 36 ohuhu markers
An interpretation of Lt. Uhura after hours. Print instructions Category: People
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Holder/Stand For Huhu Art markers Honolulu Series (and alike) Examples in photos printed with 0.4mm nozzle in PLA with 0.2 layer height. Markers: Europe: https://amzn.to/4gA8yJp North America: https://amzn.to/3XT449E
UHU glue holder for the Honeycomb Storage Wall
A simple disposable nozzle for UHU silicone glue. Should fit other silicone cartridges as well. The extrusionhole is 2.6mm wide. Print Settings Printer: Alfawise U30 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill:…
The uhura earpices I found so far just didnt hit the right spot, so I made one that fitted my tastes better. It derives a bit from the original design from TOS, but actually I like it better this way. It prints in one piece without…
Version 1 of my IKEA SKADIS UHU Stick holder
I have a bag from the brand Ohuhu with 320 alcohol markers. I noticed that these markers are packed rather messily in the bag and you don’t get them in numerical order. I therefore made a grid pattern that fits in my bag. It fits…
I purchased these markers some time ago; they came in a textile bag, to keep them bunched together and somewhat organized, provided you removed only one pen at a time. To remedy that I came up with this model, it requires a bit more space…
This is a minimalist organizer designed to hold 25 Ohuhu Markers per unit, with an aesthetic lean for display. Dimensions were designed with Dual Tip markers in mind. The brush tip is slightly wider and allows the markers to stay in place…
One of the best glue stick I have tried, but their screw cap is a disaster. So I printed my own. Any filament and settings will do.
Ozubené kolo vřetene mini soustruhu. Průměr 45.5mm, počet zubů 31 Průměr otvoru 10mm Drážka na pero 4mm Síla 10mm Tištěno z PETG
You need 4 magnets with 6mm in diameter and 3mm in height. Be careful not to glue them into the wrong holes in the lid.
fake glue stick, it's a pencil case
Simple earrings with Bauhuas motive. Ready for print.
I had someone on MakerWorld request a chihuahua straw topper, so here we are! Print flat with no supports. Originaly model: https://www.printables.com/model/1006584-chihuahua Category: Kitchen & Dining
a stackable marker holder for ohuhu markers and such
A public domain scan of the uniform worn by Nichelle Nichols in the role of Lt. Nyota Uhura in the original series of the television show Star Trek. The garment is part of the collection of the Smithsonian National Museum of African…
Hier möchte ich, wie weiter oben beschrieben, einige Kunstoffteile des “Kleinen Uhus” hochladen da es diese schon lange nicht mehr zum nachkaufen gibt. Vielleicht kann ja irgend jemand die Sachen gebrauchen der sich mal wieder nach langer…
Coasters with the motif of the Chinese zodiac / Podtácky s motivem Čínského zvěrokruhu
Náhrada za poškozený klip hrudního popruhu pro krosnu. Přerušení tisku pro navléknutí původního popruhu bez nutnosti šití.
Hold your thin, medium, thick and 2P-10 Bottles + a spot for a UHU stick and the small squirt applicator for the 2P-10. Print Settings: Polymaker Polyterra matte PLA is my daily driver for Gridfinity models Standard Gridfinity Print…
This is a remixed model from Jonas Schmibs. His model was made for the bigger 25mm UHU Stick. I remixed it to fit the smaller 20mm Uhu Stick (8,2g). The STEP file is included, if you wish to modify it
This is my take on Uhura from Star Trek: The Original Series. You may need to rescale this design to fit your needs.
1x1 Gridfinity bin to hold 3x mini super glue tubes (because they come in packs of 3) and 1x standard size tube, made in OpenSCAD using the great https://github.com/ostat/gridfinity_extended_openscad library. I uploaded two versions: one…
Pokud používáte tento produkt od Peak Design, pravděpodobně vám postupně prokluzuje popruh přeskou. Peak Design začali k novým brašnám dodávat takovou malou serepetičku, kterou nasadíte na přesku a tadá... popruh neprokluzuje. PD vám ji…
This is a case for the Sainsmart Huhushop Mega328 Tester/Meter. This case also contains a battery compartment and sliding panel for access to change the battery. The tester itself will automatically determine the component attached to it…
I made a quick insert to be able to store Copic Cicao markers in an Ohuhu Marker Shelf. The insert is friction fit.
Ikea Skadis holder for the UHU Plast special glue
Be sure to check out the tips on successfully printing a good, light Li'l Magnum ! This is obviously inspired by Optimum Tech's Zeromouse and Zeromouse Blade, but using FDM and a more affordable donor mouse. I wanted to design a Li'l…
I am using the UHU Glue in the 90g bottles and it is quite hard to keep it balanced up side down, so that the glue runs together. Print it with 2 perimiters as <10% geroid infill, but either with no bottom layers or better with a modifier…
Wanted something for my UHU glue - couldn't find anything already hopefully it works for you too!
Put some 10x10x4mm Neodym magnets in rear pockets, put some glue in to prevent losing the magnets. Ready. Design has two files, meant for an IDEX printer or MMU or other multicolor 3D-printer. Merged it also can be printed together or…
náhrada za páku řazení
A glue storage/organiser solution for the UHU range of cyanoacrylate glues. Glues featured: https://www.amazon.de/gp/product/B005FN8F7W/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1…
Dobrý den, Mám pro vás montaz na popruh na hlaven. Montaz uz se dnes moc nevidi a tak jsem ji zakoupil a zkreslil, aby tak jako ja, ji mohl kazdy mit na svoji pusce typu M4/AR15. Funguje krasne, krasne pasuje.. Mezi fotkama je kompletni…
Basic 2020 holder for a 40g UHU stick Print settings 0.2mm layer height 20 % infill. Print standing upright.
Magnetický držáky pro kryt lože šířky 160mm, použity magnety 10x5mm
Designed for full set of marker pens from Ohuhu, I ended up only printing the pen holder parts and building a wooden box to hold the modular sections. I will upload photos once back to work. The system works, but there are some gaps in…
A small drawer to fit inside of a fully empty slot in Ohuhu's Bamboo Organizer for their line of Honolulu alcohol markers, this time allowing you to store the Ohuhu Fineliner set of 8. While it lacks a handle like my previous drawer, it…
velká 3d kolekce 3d modelů všeho druhu od každého něco
The glue bottles from Uhu brand stand out by its design and bright yellow collors. However that very last bit of glue takes forever to escoate to the nozzle. This upside down bottle holder solve this problem in the same fashion as some…
Nie mehr warten oder die Tube schütteln bis der Leim aus der Tube kommt! Der Leimtubenhalter gibt stabilen Stand und kann auf Wunsch auch auf eine Oberfläche (z.B. Tisch) geklebt werden. Ich habe ihn mit 2 Wandlinien und 15% Füllung…
Designed for PETG on the Prusa MINI+, but shouldn't have any issues printing elsewhere either. I set a denser infill for the bottom to give the cup a bit of weight to prevent it from tipping over. This was my second model in FreeCAD so my…
knitting loom / pletení na kruhu 3 different sizes of knitting circle + hook, no need for printing support and high printing accuracy / 3 různé velikosti kruhu pro pletení + háček, není potřeba podpěry pro tisk ani velká přesnost tisku
This is my take on Uhura from Star Trek: The Original Series. You may need to rescale this design to fit your needs.
Hexagonal storage modules for Ohuhu Honolulu alcohol based markers (these markers are best stored horizontally) Space for 60. Modules fit together easily and can be glued or held together with DS tape. Base piece allows modules to be…
This model contains 196 ohuhu markers. It size is approx. 30x25x13,5 cm without the cover, and approx 31*25,5*13,5 with the cover. The cover just slides on the model, no need for screws The holder is printed in PETG with 15% infill The…
A small drawer to fit inside of a fully empty slot in Ohuhu's Bamboo Organizer for their line of Honolulu alcohol markers, with a handle for easier access. It can be used to store small objects (like pencil leads as pictured, erasers,…
My wife purchased the 320 set of Ohuhu Markers, but wanted them to stand up nicely in the bag. This insert was designed to help organize the Ohuhu 320 marker set so the markers stand upright and don’t shift around when moving the bag.…
knitting loom / pletení na kruhu 3 different sizes of knitting circle + hook, no need for printing support and high printing accuracy / 3 různé velikosti kruhu pro pletení + háček, není potřeba podpěry pro tisk ani velká přesnost tisku
Hexagonal storage modules for Ohuhu Honolulu alcohol based markers (these markers are best stored horizontally) Space for 60. Modules fit together easily and can be glued or held together with DS tape. Base piece allows modules to be…
An insert for the 320 markers Huhu markers set. You need two of both of the parts.
This is the STL file set for my custom 320 Ohuhu Marker Desk Shelf Organizer , designed to recreate my own desk setup at home. The shelf is made as a long horizontal marker display, keeping the markers visible, accessible, and neatly…
Jednoduchý přípravek pro nalezení středu kruhu (kulatiny). Simple tool for finding the center of a circle (logs). Print instructions Infill: 40-50% Internal fill pattern: honeycomb
Hledač středu Je praktická pomůcka k vyhledání středu na kruhovém tvaru. Přiložením několikrát hledače středu na obvod kruhu a narýsováním několika přímek jednoduše najdete střed kruhu viz ilustrační foto. Nebo k narýsování přímky vedené…
Žáci 9. třídy v rámci hodiny ICT měli navrhnout klíčenku s logem školy, kterou si následně vytisknuli. Žákům bylo zadáno v programu TinkerCAD vytvořit klíčenku s logem školy, toto je jedna z prací našeho žáka. Logo školy žáci museli…
Modified mount to fit popular 3rd party charger & add an option that sticks out a bit with a slight upward angle
Dies ist ein Halter für UHU Kleber Tuben passen für die Honeycomb Wall. Der Durchmesser der Löcher ist 16mm, falls es auch für etwas Anderes verwendet werden soll :)
Ozubené kolo soustruhu 20z modul 2,5; střed 20mm s osazením na pero 8x4mm; tloušťka 32mm
ADDED 3/4/25: ohuhu_honolulu_x48.stl is a 6x8 grid to fit 48 Honolulu markers in the same base. I wanted a good looking, solidly standing horizontal marker organizer for the Ohuhu 40 alcohol marker set so the tips have less chance to dry…
Vybavení do dílny V3s 1:43 Od @KRtekTM_46390 Skříň na Praga V3S (Degostini, 1:43) Pozor kresleno pro model který je zvětšen na 130% Model: Praga V3S 1:43 od autora KRtekTM | Stáhněte si zdarma STL model | Printables.com Skříň na Praga V3S…
