Liczymy pasujące modele…
Update 3/5/23: I have added a wider bulb holder for the IOM/US1M style boats. I also added Star 45 boat arms, bulb holder, plates, and clamps. Update 2/4/22: I added a longer pipe catch piece to allow the stand to go into “narrow” mode.…
Shelly plus1pm surface-mounted box for EU power outlet
I created this model of the phone so I can use it to design accessories like cases or stands. This model was created by measuring the original phone with calipers and using fillet gouges so it is only about 90% accurate. It also includes…
Use it Carry an extra round, or to carry a specialized round. (breaching, non-lethal, flare, etc) Apply 3M VHB tape or similar double sided adhesive to largest flat side for mounting. Must have a flat area below the breech on pump-action…
Update: These were originally designed based on the Shapeways processes. I've received feedback that on some other processes, the holes may be slightly too large. I have added two additional model files that have the individual gears only…
This is a collection of single lane track pieces that are compatible with Tyco Trucking US-1. Note that the turns require special clips (provided) that will allow them to securely connect with existing single lane US-1 track segments. The…
This is a reproduction of the Shell Garage from the Tyco US-1 sets. There are a few things to note when building this to get a quality result. The track should be printed upside-down on a textured PEI sheet. Also, take care to get the…
WARNING since last update X1 will heat up if there is a M3 command at the start of the G-code Who never thought: what if my 3D printer was a 2D printer ? All you need is a M6*40 bolt and a nut to go with it, simply put the nut in the…
This is a fully functional reproduction of the Tyco Trucking US-1 Phonebooth Action Accessory track. The track should be printed upside-down on a textured PEI sheet. Also, take care to get the height of the first layer dialed in before…
These are the things that always seem to have gotten lost for Tyco US-1 Trucking sets. Included are the box, log, pipe, and several barrel designs. If you find them useful, post your make! Print instructions Unassociated tags: Slot Car,…
This is a design for a selection of replacement parts for the Tyco Trucking US-1 Fire Engine. Some parts may also apply to the Wrecker, although I don't have one of those to check for sure. These probably need to be printed either via SLS…
This is a replacement freight terminal building for the Tyco Trucking US-1 freight terminal "action accessory." It includes the building, which is printed flat and assembled just like the original. And it includes the roof. I printed this…
This is a replacement sign post and sign board for the Crate Unloading platform tor Tyco US-1/ Tyco Trucking. For the sign post, I include both a version with a strategically placed brim and one without. The brim is 0.2mm thick and can be…
This is a single lane straight track (9 inch long) for use with the Tyco Trucking US-1 set. Specifically, it is for the turnouts to Action Accessories (see pictures). It requires metal track-- if you have any broken track pieces, you can…
This is a base level conversion kit to make your DragonFlight 95 into a class legal US1M. This boat conversion is sometimes known as the Dragonstein.…
These are track risers suitable for use with Tyco US-1 and similar slot car track. Models are provided for a variety of different heights.
I have created a set of files for use by everyone interested in making their own US1M bulb. These bulbs files are based on the current bulb and mold design used to cast ballast bulbs for the US1M class, but may be appropriate for other…
This is a track clip used to connect Action Accessories to turnouts for the Tyco Trucking US-1 set. Print instructions Category: Toy & Game Accessories Summary This is a track clip used to connect Action Accessories to turnouts for the…
This is the wall enclosure for the Tyco Trucking dump yard. The original walls often are warped over time, and this provides a solid replacement. Print instructions Category: Toy & Game Accessories Summary This is the wall enclosure for…
This is a replacement stop sign that will work with several of the Tyco Trucking US-1 Action Accessories Print instructions Category: Mechanical Toys Summary This is a replacement stop sign that will work with several of the Tyco Trucking…
This is a replacement structure for the Tyco Trucking US-1 "Car Unloader Action Accessory." The design is a little different from the originally, specifically in that it has a sign above the track where the truck enters. I added this to…
This is a set of parts that will let you modify the Log Loader tractor to self-reset. You will need two of the pegs. Also, you will need to trim the length of the one that goes into the disk so that it doesn't go higher than the LongSlot…
These are replacement parts for the Tyco Trucking US-1 Log Loader. This set includes the plastic armatures beneath the surface as well as the tractor that goes above. To build a replacement tractor, in addition to the plastic pieces, you…
This is a replacement backstop for the Tyco Trucking US1 Auto Unloader Print instructions Category: Toy & Game Accessories Summary This is a replacement backstop for the Tyco Trucking US1 Auto Unloader
These are replacement parts for the Tyco Trucking US-1 Log Loader. This set includes the plastic armatures beneath the surface as well as the tractor that goes above. To build a replacement tractor, in addition to the plastic pieces, you…
I started with RockChalkAZ's shell garage roof and added a hole for the chimney for the firehouse. For the crate loader, I removed all the holes. There is a tab on the inside front of both buildings, so I made an indentation for it to go…
I couldn't find a holder for this AstroAI multimeter, so I made one. I printed this with Prusa Silver PLA at a .2mm layer height and 20% infill.
Use a 2U Rackmount support like this https://www.musicstore.com/fr_BE/EUR/DAP-2-HE-Rackblende-f-Modulsystem-10-Segmente-MP-1/art-PAH0017160-000 They use half length of the 2U module
!!! I have purchased 2x more Up Plus machines and one of them has slightly different (wider) hotend mounting point, if you have one of these please bare with me while I'm amending mounts to fit this variant. If you have 3rd variant or so…
this hasent been tested so please give feadback
OnePlus15 TPU case with a battery window. I have no idea how it's going to fit, but time will tell. The OpenSCAD script is kinda hardcoded. Uses the stl from the original https://www.printables.com/model/1495840-oneplus-15-cases/remixes
Simple peg to adapt jam trailer to US1. I removed the guide wire and glued in a guide pin with resin. Category: Toys & Games
Use it Carry an extra round, or to carry a specialized round. (breaching, non-lethal, flare, etc) Apply 3M VHB tape or similar double sided adhesive to largest flat side for mounting. Must have a flat area below the breech on pump-action…
GI Joe Rocket Launcher Pivot Repair Section. Repair section that goes on the bottom of the operating Slide piece,
Project Expired patents - "Reviving Forgotten Inventions" I search Google Patents for intriguing expired patents and bring them back to life—because I believe they’re either interesting, funny, or genuinely useful. Once I find a design…
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…
I was tired of trying to hold the mast of my US12 RC model sailboat as I attached it to the hull…I needed a third hand. This “third hand” snaps to the hull and the mast, allowing you to connect the shrouds, fore and aft stays. There are…
The original keyboard uses a different part for each side, but I've been using this one for both sides without problem. 3D printing parameters: 0.2mm layer height 0.4mm extrusion width 3 walls 15% infill No suports needed
Update 3/5/23: I have added a wider bulb holder for the IOM/US1M style boats. I also added Star 45 boat arms, bulb holder, plates, and clamps. Update 2/4/22: I added a longer pipe catch piece to allow the stand to go into “narrow” mode.…
