Liczymy pasujące modele…
Update 21-01-2025: V2 address some issues that other users noted. Additionally, I’ve added some modifications to guide the assembly pieces. Design Changes: Note: This version came out tighter than the previous one, so maybe more force is…
I got the Ikea Vesken version with 4 bins but wanted 2 towers of 2 bins out of this. So i remade the top plugs and bottom legs. The fit is quite close so you have to push them in a little, no idea if they will ever come apart easy. But…
These Gridfinity base plates are designed to fit the rounded bottom of an Ikea Vesken cart bin. Print the center plate once, and the end plate twice, and you'll have three base plates that will press-fit into the cart bin snugly for a…
Snap in place shelf divider for IKEA Vesken Trolly. Uses about 36grams of filament and takes 1.5-2H to print. Any material, no support. super easy. please post a make and like this if you find it useful thanks :)
Ikea Vesken Small Leg sized down to be able to fit flat on the bed of the Prusa MK3S
Simple hook to add to a shelf of a Ikea Vesken storage rack. Totally inspired on https://www.printables.com/model/121693 Thanks for the nice and simple model.
Hook just simply inserts to the holes on the shelf. Hook fits to the holes that are on the side (middle ones are smaller).
I couldn't use the full height of the original VESKEN unit under my desk, so I printed these extra feet to reuse the spare shelves and create a whole new, shorter unit. The design closely matches the original IKEA foot, with small tweaks…
I printed a center plate, and an original end plate to start. I placed them both in my Vesken Cart and held the center plate in place. Then I relocated the end plate to the other end, and measured the gap between the two parts. For me it…
A spacer to increase the shelf height of Vesken Selves and Trolleys
Fits perfect on IKEA VESKEN Products
Leg raiser for the Ikea Vesken . The included .stl has a top height of 90mm, and a base height of 51mm, meaning it will raise the whole shelf leg by 51mm. The included .f3d (and maybe .stp ) is parametric, so you can change these values…
Gekürzte Seiten für IKEA VESKEN Regal Dieses Modell basiert auf den Seitenteilen des IKEA VESKEN Regals und wurde gezielt in der Höhe eingekürzt , ohne die Funktionalität des Regals einzuschränken. Durch die Anpassung bleibt der lichte…
simple hook with a 19mm spacing, meant to be hooked on Ikea Vesken shelves
Simple Can/Bottle/Glass holder that snap-fits on the trays of the IKEA VESKEN trolley. Print the large overhanging part with Snug Normal supports and it should be fine. Printed mine in Bambu PLA Jade White and it mostly matches the color…
A snap-on hook for IKEA VESKEN shower shelf. No support needed.
In order to add extra security to the Filament Spool Storage Rack / Ikea VESKEN Shelf unit leg I made this rails/guides and support to make it easy to slide the rack vertically so they don't tip over, at the same time it will guide the…
S Hook for IKEA VESKEN Bathroom-Shelf
A simple part to join leg-pieces of IKEA Vesken cart if you need to lower it by cutting the original legs - and you don't feel like printing an entire new leg. When cutting the legs, make one cut 30mm from the bottom of the leg you want…
I designed this simple toilet paper holder to fit the IKEA VESKEN shelf. It allows you to conveniently store and dispense a toilet paper roll without drilling or modifying the shelf. The holder slides onto the shelf edge and keeps the…
Ich habe mir ein Ikea Vesken gekauft und wollte meine Werkzeuge fürs Perückenstyling organisieren und dieses Modell kam dabei rausStand jetzt sollte es möglich sein zwei dieser Halterungen an den langen seiten anzubringen und eine an der…
Ich habe mein erstes Modell dieser Art überarbeitet. Jetzt sind die Haken länger, sodass mehr Sachen dran gehängt werden können. Die Kanten sind teilweise abgerundet. Außerdem ist der hintere Balken kleiner, dadurch ist auf dem Vesken…
printet with basic settings in petg. 0.2 layer, 0.4 width. on enderKE
Feet to replace the castor that came with the IKEA VESKEN. Lowers the height just enough to fin under the shelf in my cupboard so i can use for filament storage.
normal version is 5mm thick, the thin version is 3mm thick.
Gridfinity base, for any gridfinity compatible model. Remixed for prusa mini. BGcode ready to print for prusa mini + prusament. Download and print one of each model. You will also need one extra end part, that you can download from the…
Work In Progress! Creates a rail to interface M6 Square Clip Nuts to an IKEA Vesken Shelf. I used these clips specifically: https://www.amazon.com/dp/B09CDT8RP9 . I had to use tweezers to pull the clips through, since the tolerances are…
STRONG Ikea VESKEN swivel castor mounts for Ikea ALEX swivel castors. A VESKEN fully loaded with 3d printer filaments is HEAVY! Trying to design strong swivel castor mounts is difficult because the VESKEN plastic legs flex. NOTE: This was…
!! It is a remix! thingiverse addd source button fail working! needed a way to increase my storage capacity in a small closet in my kitchen to put more stuff in it and I still had enough space in frnt so I looked for a design by a felllow…
printet with basic settings in petg. 0.2 layer, 0.4 width. on enderKE
Gekürzte Seiten für IKEA VESKEN Regal Dieses Modell basiert auf den Seitenteilen des IKEA VESKEN Regals und wurde gezielt in der Höhe eingekürzt , ohne die Funktionalität des Regals einzuschränken. Durch die Anpassung bleibt der lichte…
Cup holder attachment that clips onto the edge of an Ikea Vesken cart . Printed upside down with no supports in PETG. Cart is used in car between children seats.
Gridfinity base, for any gridfinity compatible model. Remixed for prusa mini. BGcode ready to print for prusa mini + prusament. Download and print one of each model. You will also need one extra end part, that you can download from the…
I'm using Ikea vesken for my filament storage solution, and made this simple bracket to keep top-rolls from falling of. Keeps them in place. Simple ting, print in PLA or PETG. Snap-on! No supports!
Pevná nožička k regalu z IKEA VESKEN. Tento regál je ideální pro filamenty do regálu se vejde 18 filamentů.
Cup holder attachment that clips onto the edge of an Ikea Vesken cart . Printed upside down with no supports in PETG. Cart is used in car between children seats.
This is a simple hook designed to attach to the IKEA VESKEN shelf. It slides onto the edge of the shelf and provides a convenient place to hang small bathroom items such as towels, brushes, loofahs, or other accessories. No screws or…
IKEA Vesken Filament Shelf Connectors Hey maker! 👋 A practical set of connectors to turn multiple IKEA Vesken shelves into a stable filament storage rack. Features: Single foot for one shelf or corner sections. Double foot to combine two…
The holder is made for a M10 rod, which fits loosely into the holder.
I have created the "Vesken Tag" a tag clip-on with a QR code and a filament sample slot. Scan, order, and go. You can of course use it for anything else like print settings etc. For the labels, I used my label printer.
Wanted to make two racks from one Vesken set. Print laying, otherwise the layers might come apart. Print instructions Category: Replacement Parts Summary Wanted to make two racks from one Vesken set. Print laying, otherwise the layers…
Inspiration is from https://www.thingiverse.com/thing:4399342 … but mine is more robust and made by myself. Also was asked to make some parts more larger. Printed like 10 of them already and still “they” asked for more.
I created this planter for IKEA VESKEN because I use these cheap shelfs for my green house. This separates the shelfs into multiple compartments for easy planting. Best use with PETG. No supports required.
I created these bins for IKEA VESKEN to separate the shelfs into multiple compartments for easy organization. No supports required.
