Liczymy pasujące modele…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and i think every…
This model is for the airsoft version of the SIG Sauer P320 M17 from VFC. It's not for a real gun. Part you need to print: Body 1x Right side 1x Left side 1x Trigger 1x Endcap front (v1 or v2 ) 1x Endcap back ( v1 or v2) 1x Mag release…
This custom baseplate fits on VFC Glock magazines and has a dot matrix for markings on both sides. Print Settings i used: Printer: Prusa MK3S+ Prusament PLA (Army Green) 10% Infill 0.1mm Layer Height If you need anything, feel free to…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Model includes the grip itself and .3mf file With modifiers for adding fuzzy skin for grip already contained on the model. Highly ergonomic grip designed for easy 3D printing, uses the same grip angle as the Magpul MOE K2 grip along with…
I made an exact replica of the original VFC Speedloader adapter, because I lost mine. I tested it on a V2 416 mag and it worked fine. this probably works with other brands as well. Give it a try and submit some feedback please.
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Loading Adapter for the VFC V3 M4 Magazines, Prints completely support less and provides and easy compact loading system for those who use VFC GBBR Magazines The Rear notch allows for the easy unloading of magazines straight back into a…
***UPDATE!!! → Added a extra model for the SIG XM7. The normal Speedloader will fit as well. Its just so you have the right description on it. Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by…
(Pardon my english, I am not a native speaker) Tired of wobbly PTS mags in your magnificent 416 ? Here is a solution ! This magwell will hold your mag in place and preventing it from oscillating from right to left into the pew's magwell.…
Accidentally dropped a mag and the baseplate broke. Not a big deal, but baseplates cost way too much for a small piece of plastic. Couldn't find a proper VFC GBB version, so I quickly whipped this up. Fits just as well as the stock…
Introducing the reference file kit for VFC M4 and AR models, if you happen to need reference files look no further. This package includes the following Barrel Extension Matches the OEM Dimensions Additional stl files for printing in metal…
All parts shall be printed from stiff, strong material, prefferably PETG CF or Nylon CF
Simple and easy, the screw-less flared magwell gives you a much easier time reloading, while being very low profile and still removable. Print in PLA+ or stronger (Just make sure the material has some flex if you ever want to remove it)…
Reverse engineered OEM nozzle for VFC AR15-based GBBRs. Modified slightly to include a 45-degree cut for printing. Tested using eSun PLA+ Printed at 0.20mm layer height Recommend using tree supports
Replacement Butt pad for the VFC SCAR-L I do not know if it will fit other SCARs.
I designed this rail adapter for my friend's new airsoft replica, the VFC FAL, GBB version. This little rail adapter slips into the rear dovetail joint and replaces the rear sight.
is a good solution while you are waiting for an original part. i don't know how many shots it can take because i only fired 2 mags on it and looks nice. print on side.
***UPDATE 13.05.26 Added a new variant, that will automatically reset your STOP ON EMPTY mechanisim, everytime you load a magazine. The Idea was thought up by Manamuner, a member of the Heavy Recoil Club. To honor his contribution this…
UPDATE - With help of the commiunity, the Front Loader design could be improved to load easier. Thanks to "Delta Mike" of the Heavy Recoil Club! Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by…
The rear slides over the hop up adjuster and is open at the bottom so it doesn't interfere with MLOK forward grips. The rear part is held in by the front piece once its screwed onto the barrel thread. You will have to remove the barrel…
This is a spacer that secures a Polarstar Kythera HPA engine to the alignment nub, removing back and forth travel as well as preventing some rotation. Print 2 copies, one for each side of the gearbox. This spacer is secured through…
Replaces the barrel AND muzzle of a VFC Mp5. There is space for an o-ring at the base of the 14mm threads, to prevent muzzle devices from binding. .2mm or better LH recommended for muzzle The 11mm barrel spacer must be printed at very…
***Had to name it in this wierd way, because Glock is very protective of its name. I should've expected this beforehand, the biggest producer of ...."Horse milk".... will be a bit awkward when its about reading his own name. "Big Stick" -…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
***Update 09.06.26 Edited the model so it will also fir UMP 9 Magazines. Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't…
stampatelo in PLA con nozzle da 0.4mm e 0.15mm di layer STAMPA SENZA SUPPORTI
Here is the file which you can print and use to make a NPAS valve for VFC GBBRs that dont feature muzzle energy setting. More details are in the video: https://youtu.be/JR75Rqwzj30
For the best results use a matte TPU. I used: “Sain Smart Matte Black TPU” Angle the print as show in the picture (45°). Apply Fuzzy Skin as shown in the picture. Do not print multiple levers at a time. Assembly of the RS type will take a…
This wheel it will replace the tedious vfc hop up adjustement done with an hex key with this wheel that i designed inpired by the ghk one, with this installed you'll be able to adjust the elevation of the bb's without disassembling the…
***UPDATE 13.05.26 Added a new variant, that will automatically reset your STOP ON EMPTY mechanisim, everytime you load a magazine. The Idea was thought up by Manamuner, a member of the Heavy Recoil Club. To honor his contribution this…
See video below to understand how to assemble the parts to your VFC HK417 GBBR to improve hop up performance and increase range!!! All parts printed with simple materials, have to be stiff and strong - PLA is good choice. Do 3 outlines,…
Print best from PLA, complete part should be made of outer shells. Has anti-elephant foot features implemented, for orientation check picture attached. For assembly instructions check link below:
Here are the models for VFC M249 HPA Frog mod - Hose retention clips and tube benders. For details see the video:
Conversion kit for the VFC SR25 gbbr and variants. This kit allows for the use of the 4UAD Magnus Pro Hop Chamber in the SR25 receiver. Stock SR25 barrels are not compatible unless modified using a lathe. The included barrel base is…
Magwell for glock17 of VFC Umarex. its a tight fit but still could use M3 screw to hold Printer used : Ender3 V3 SE Layer height : 0.12
***UPDATE*** Modified geometry to make it print easier. Use TPU for best performance. Empty Chamber Flag (EC-Flag) Features: Designed to not rest against the nozzle, as to not induce stress and potential damages. Pushes BB's out of HU…
Reverse engineered OEM nozzle for VFC SR25-based GBBRs. Modified slightly to include a 45-degree cut for printing. Tested using eSun PLA+ Printed at 0.20mm layer height Recommend using tree supports
A handguard made to take a Novritsch Scopecam or ClipCam. It will fit any MP5/HK53 that uses real steel specs. Model is already oriented for optimal printing. I included a model with integrated supports just place it on your printer and…
VFC M249 Feed Adapter for Box Mags and other feed types you need the Feed Adapter is placed on the bottom instead of the top, making reloads easier and more ergonomic. Designed around the following Hardware - Retro Arms M249 Bowden Spring…
ASA, NYLON, PET 0.20mm layer height 30% infill no supports
***UPDATE*** Added varaint for AKS 74U Use TPU for best performance. Empty Chamber Flag (EC-Flag) Features: Designed to not rest against the nozzle, as to not induce stress and potential damages. Pushes BB's out of HU Chamber. (No broken…
This is a replacement magazine baseplate for the VFC HK417 and G28. I have painted them after printing to match the original one. Feel free to comment, remix and especially to print. If you want to have the full fusion file I maybe upload…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Printable replacement nozzle for the Maple Leaf Hummingbird for VFC gbbrs. This nozzle is designed to use standard VFC rocket valves instead of the proprietary Maple Leaf valve. I was able to achieve 450 fps on 0.25g BBs with an NPAS…
Guide hop style retro mod for VFC HK416D & M27 generations 1 & 2. Official VFC system is patent pending, this is just a retro fit upgrade mod to bring your old HK416s back to life. No profit is being made of the mod. See manual in the…
There's already a BEU (Battery Extension Unit) on the market for the PDW stock but it attaches on the inside of the metal piece that is attached to the gun, this effectively reduce the maximum possible width of the battery. Therefore I…
Low profile handguard for the VFC M249 GBBR, made to be more comfortable than pic rail handguard while still retaining the ability to mount grips Required Parts 2 - M4x8mm Heat Set Inserts 2 - M4x12 (up to 16mm) Counter Sunk Screws
Original arm has lots of slop in the pin hole allowing for front to back movement of the arm. It also has slop in the width allowing for side to side movement. The pressure point of the arm also doesn't fill the window available for…
For details see video: https://youtu.be/ ... to be linked when published
Adjustment Currently the default inner bore is 4.4mm, if you're going for UK power-limits, I think a slightly tighter 4mm is better, I've heard that is what the Waldo Crimson NPAS uses, this should basicity bring the adjustment range down…
As in the title, replacement parts to be 3d printed for FE VFC SR25 SR25ECC M110 SASS M110K1 HPA GBBR conversions, gen1. For details see video:
The VFC RAS does fit the WE Apache as standard but I found the rails were all angled down slightly and it didn't lock up very securely. This is two models that should fix that angle and help lock it all down. It also has the added bonus…
Snapped your charging handle with none left in stock? This should get you running again! I made this model taking hand measurements from my own snapped handle. Running it in my own RIF it ran and felt no different to the OEM one. Off of…
VFC GBB SCAR-H/M110/SR-25 Adapter for Odin M12 Adapter Compatible with Odin M12 Sidewinding Speed loader and most clones (though not tested) No hardware required Features an easy magazine unloader Load your VFC Gas Blowback magazines in…
A tool to help you loosen the backplate of the all too heavily glued VFC Boltcarriers. Will fit HK53/PSG1 as well. This tool is meant to help you, get the backplate loose. Do not over tighten using this tool!!!!
The O-light PL-PRO Valkyrie attachment to the M17 was a bit too far forward and thus out of easy reach while using the gun. This simple part lets the flashlight clamp in a position closer to the trigger guard. Category: Sport & Outdoors
A spacer to convert the AEG Handguard to fit your GBB it will also fit the shorter Handguard variants. It also includes barrel braces, just in case your G3 ever developes “barrel wobble”. Use M5 Grub screws for Part 2 & 3. Print…
***UPDATE*** Modified geometry to make it print easier. Added a variant for the up and comming HK33. Use TPU for best performance. Also fits HK33, HK53 and PSG-1. I included models for all variants plus HK51 & HK21. (In case you are brave…
***UPDATE*** Modified geometry to make it print easier. Use TPU for best performance. Empty Chamber Flag (EC-Flag) Features: Designed to not rest against the nozzle, as to not induce stress and potential damages. Pushes BB's out of HU…
A tool to help you loosen the backplate of the all too heavily glued VFC MP5 Boltcarriers. Will also fit G3A3/PSG1/HK53. You will need two bolts: M3 x 25mm This tool is meant to help you, get the backplate loose. Do not over tighten using…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
If threads are too tight, scale to 102% and try again
Print form STRONK filament like cf nylon I'm getting 1.2J in my sd
Speedloader adapter for VFC GBBR magazines.
Tubo derecho y tapón para la culata QRS de Vega Force Company ligeramente más ancha para poder albergar baterías de mayor amperaje. Recomendaciones para imprimir: Tubo: Incluir soportes solamente para sujetar los anclajes exteriores del…
If you have the old ASG VFC colab M40A3 you may have come across the issue like me that there are few good solutions for keeping spare mags to hand. I made the Molle adaptor a separate part for both ease of printing and so other types of…
Wall thickness wants to be high, as it will need to be screwed to the metal frame using the original screws, a 2mm drill bit will be needed to pilot the holes in the new handguard. You may need to cut tabs of something like electrical…
I don't like how the bolt is riding and wearing down in the APFG MCX upper receiver, so I decided to try and fix that. The whole solution uses an additional guide rod and brass bushings, so it's not an easy mod to do, but it seems that…
Convert every MP5 front sight to be able to mount to your G3A3. Especially made to use with crusader steel front sight. Print Settings: Model already oriented for printing. Use PETG or PLA. Layer height: 0.15mm Perimeters: 5 Infill: 100%…
Might be a case of a solution to a problem that doesn't exist but I wanted to paint my VFC AK105 and didn't want to paint a magazine. So instead of using tape like a normal human, I made a mag well cover to protect the inside from the…
Reference hop unit for the vfc ak series not optimized for printing
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Some small bits and pieces I've designed for my VFC AKs to either install or fix stuff. The LCT and 5KU PT-* step files are meant for CNC machining, I've had great success with mine made from 6061 alu with a hardcoat anodized finish. Be…
The other ones I've found online are all too clunky and or too angular. Mine are nicely filleted, have no sharp edges and I made sure, that they don't differ at all from the original baseplates. They fit perfectly well / nice and snug…
This adapter allows feeding the GBB magazine of the VFC FAL / OSW with a High-Cap magazine. I used a "Dboys SCAR-H Mk17 500rds Magazine". There is quite a lot of filing and dremmeling needed. Therefore I only recommend it for experienced…
Nozzle guide for the VFC Scar H AEG with a tighter inner diameter to reduce nozzle wobble. Exact clone of OEM, just with "fins" inside. Can print without supports.
There is a high chance your VFC G3 will at some point, develop a condition called "Barrel Wobble". These spacers go between outer barrel and handguard and will inhibit any independent movement of your barrel. I made two versions, one for…
There is a high chance your VFC HK53 will at some point, develop a condition called "Barrel Wobble". These spacers go between outer barrel and handguard and will inhibit any independent movement of your barrel. I made multiple versions…
Straight trigger for the VFC SCAR AEG. Much more ergonomic than the stock trigger. print sideways in a stiff material for best reasults
Tired of trying to hold your mag follower down when trying to load your magazine? This little print will help you do just that. I call it the Glock Chock. Feel free to remix it or let me know if it works with other magazines. Ignore my…
M-LOK rails to replace the Picatinny rails on the SCAR platform. I designed these based off my VFC SCAR H AEG. I believe they should fit on other makes like the WE and TM on both the H and L models but I don't have my own to test the fit.…
M-LOK rails for the SCAR H SSR MK20. These were designed based off my VFC SCAR H. they should use all the original fittings. If there are any fitment issues with your brand of SCAR please let me know. I have included two versions of the…
When you want to get rid of the wobbly ambi selector off your VFC SCAR AEG but want something to cover the hole. This super quick and simple print and a dab of glue will have it looking a lot cleaner
***UPDATE 13.05.26 Added a new variant, that will automatically reset your STOP ON EMPTY mechanisim, everytime you load a magazine. The Idea was thought up by Manamuner, a member of the Heavy Recoil Club. To honor his contribution this…
***UPDATE*** Modified geometry to make it print easier. Use TPU for best performance. Empty Chamber Flag (EC-Flag) Features: Designed to not rest against the nozzle, as to not induce stress and potential damages. Pushes BB's out of HU…
***UPDATE*** Modified geometry to make it print easier. Use TPU for best performance. Empty Chamber Flag (EC-Flag) Features: Designed to not rest against the nozzle, as to not induce stress and potential damages. Pushes BB's out of HU…
***UPDATE*** Modified geometry to make it print easier. Added a variant for the up and comming HK33. Use TPU for best performance. Also fits HK33, HK53 and PSG-1. I included models for all variants plus HK51 & HK21. (In case you are brave…
Loading Adapter for the VFC V3 M4 Magazines, Prints completely support less and provides and easy compact loading system for those who use VFC GBBR Magazines The Rear notch allows for the easy unloading of magazines straight back into a…
***UPDATE*** Added varaint for AKS 74U Use TPU for best performance. Empty Chamber Flag (EC-Flag) Features: Designed to not rest against the nozzle, as to not induce stress and potential damages. Pushes BB's out of HU Chamber. (No broken…
Original arm has lots of slop in the pin hole allowing for front to back movement of the arm. It also has slop in the width allowing for side to side movement. The pressure point of the arm also doesn't fill the window available for…
VFC M249 Feed Adapter for Box Mags and other feed types you need the Feed Adapter is placed on the bottom instead of the top, making reloads easier and more ergonomic. Designed around the following Hardware - Retro Arms M249 Bowden Spring…
Introducing the reference file kit for VFC M4 and AR models, if you happen to need reference files look no further. This package includes the following Barrel Extension Matches the OEM Dimensions Additional stl files for printing in metal…
Remix of the Hoffman Tactical ORCA for VFC V3 Modified to take VFC V3 Parts, Will not take Crucial Real AR Parts, For AIRSOFT USE ONLY Model is WIP and needs testing
A handguard made to take a Novritsch Scopecam or ClipCam. It will fit any MP5/HK53 that uses real steel specs. Model is already oriented for optimal printing. I included a model with integrated supports just place it on your printer and…
Low profile handguard for the VFC M249 GBBR, made to be more comfortable than pic rail handguard while still retaining the ability to mount grips Required Parts 2 - M4x8mm Heat Set Inserts 2 - M4x12 (up to 16mm) Counter Sunk Screws
I made an exact replica of the original VFC Speedloader adapter, because I lost mine. I tested it on a V2 416 mag and it worked fine. this probably works with other brands as well. Give it a try and submit some feedback please.
***UPDATE 13.05.26 Added a new variant, that will automatically reset your STOP ON EMPTY mechanisim, everytime you load a magazine. The Idea was thought up by Manamuner, a member of the Heavy Recoil Club. To honor his contribution this…
![Prism Arms - K-Industries "Strike" Pistol Grip [For VFC M4/AR GBBR]](https://media.printables.com/media/prints/42f3c46a-42cc-4d5a-a297-383f5528edea/images/10361191_bdee274f-2411-454e-aa6d-c79876cb6740_4e4cba5b-2a49-41be-950f-53fbb70cb871/20250731_102105.jpg)
![[AIRSOFT] VFC HK416A5 Magwell for PTS EMP](https://media.printables.com/media/prints/943621/images/7207319_e770af12-f9c6-4d61-a8f6-b93d025482fa_5a8789ef-9c3d-4243-acda-24244f075e31/20240714_213352.jpg)
![Prism Arms - K-Industries Snap On Flared Magwell [For VFC and Vipertech M4/AR GBBR]](https://media.printables.com/media/prints/f3a951ce-22db-42c8-9298-20822710f549/images/10442023_e399e830-748f-4f3d-8001-6d643039444a_15f9fc5a-6c64-42da-8155-6e5445ff795c/20250812_165710.jpg)
![VFC M249 GBBR Feed Lip Adapter [REV.2.0]](https://media.printables.com/media/prints/11ea63d0-7ea2-4c23-8ffe-9884a02f3f90/images/12600941_d14e527d-bfa4-4d32-97c0-7e1c9f45afa6_2094483c-7050-48f3-9a04-dd0e3f106d90/sqss-rev21.png)
![[Umarex/VFC] UMP 45 / 9 Charging Handle](https://media.printables.com/media/prints/0ab9e8f6-b743-4314-bff6-de94f3a8e897/images/11616230_5b34de37-2738-448f-993b-029404bb0715_66f0f407-6320-4f47-9fa9-43b2b0869463/20260103_211832.jpg)
