Liczymy pasujące modele…
Elevate your VTech Marble Rush experience with these custom-designed accessories, engineered to expand your existing track and enhance your playtime adventures. Crafted to seamlessly integrate with the VTech Marble Rush system, these…
Model of a B-Series VTEC valve cover, not much else to say. The model will probably load way far away from the build plate for some reason, just right click and select auto arrange models if you are using cura. Resize the model to however…
Track piece to extend this circuit. Short and medium rail have the same length that original parts. Half short is, as it sound, half the size of the short one. It usefull to fill gap in some cases. Print instruction: Supports needed for…
This is a sparepart for the Vtech Kidi Super Star DJ Studio.
Simple stop plate for VTech Marble Rush game.
I really like Vtec motors and I was needing a new key holder so a made this :D I already test in PLA and PETG Infill: 20% No supports Layer: 0,4mm #TopSolid7
Fake block to be used for stacking (ie elevation of other widgets/blocks) in order to save genuine (ie useful) blocks. Having more genuine blocks free allow to build more and longer funny tracks. If classic blocks (blue, orange,…
Additional tracks for Go Go Smart Wheels - Tut Tut Bolides...
Needed a bracket to mount baby monitor to wall. Lost original mount. I had issues with filament expansion due to my .6 nozzle. Printing this model may require some adjustment to scaling or wall settings in the slicer.
Ramp to lift the train. It's quite steep and only VTech Baby 80-194404 will get it with good batteries! The other self-driving trains will slip. You need a BIG printer for this thing or you have to split it up! Video:…
This is a replacement kickstand for the VTech baby monitor (VM919HD). It may fit other vtech 7"monitor displays but it has not been tested.
This ramp has a much lower angle compared to my other designed and due to its length it is splited up in parts. All the trains and card self-driven has worked for me with an angle of around 10°. Video:…
First Model Number VM924-2 They designed the monitor display in a way that it constantly falls over - Fixed it
A Mount that allows vtech cameras to mount tot he side of your baby's crib hardware free. Print PLA or PETG 0.2-0.28 layer height 3-5 perimeters 15-30% infil
Drive/transmission gear for a Vtech Remote Racer gearbox. The original was some soft plastic that quickly wore out, unlike the other similarly sized nylon gears that are also in the gearbox. The new PLA gear works well but is noisier, so…
DRAFT - MAY NEED MORE WORK 2x2 base-plate VTech Marble Rush game. Top squares sound OK but connectors may need more work to fit correctly. Check before printing. Feedback welcomed.
I wanted to put the baby monitor on a tripod instead of mounting to the crib with screws. This did the trick for me. I needed a brim to keep to the bed when printing. Tips appreciated: https://ko-fi.com/yuggniiks
I remixed this design to fit an Ender 3 (235x235) build plate. Still works with the original ramps from the creator Xylen.C4 I recommend printing with normal supports, the tree supports let the connections a little fragile and layer…
DRAFT Straight long road for VTech Marble Rush game. Based on straight (short) road from https://www.thingiverse.com/thing:5209601/files
Wanted a mount that didn't use screws in the wall and where i could take the camera down if I needed it somewhere else in the house.
Base plates for VTech Marble Rush game : 1x1, 2x1 & 3x1. Changelog : 29-Sep-22 : 1x1 released. 08-Oct-22 : 1x1 updated + 2x1 & 3x1 released. Better male connectors for all models. Print Settings : Supports : Yes Infill : 20
A configurable disc generator for the great toy lamp “funny sunny” from vtech. These discs can replace the included and extra discs in case they got lost. (Not so unlikely with young kids) Instructions: Print ideally with plastic in the…
Ich habe 2 Stützen für die Tut Tut Flitzer Parkgarage als Ersatz konstruiert um sie zu ersetzen. Beide sind im Erdgeschoss verbaut.
This is a remix of the original model by dburner, designed for easy mounting of VTech baby monitor cameras to the side of your SNOO (Happiest Baby Bassinet). For best print strength, it's recommended to print the model lying on its side.…
This is a simple Marble Rush Space https://www.printables.com/@CryBaby_2514197/ Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No Supports: No Category: Toys & Games
Remix of the microphone stand adapter for use with a 1/4" tripod mount (such as a small tripod with flexible legs).
Quick release wall mount for the vtech bm3800n, which allows you to move the monitor from room to room easily and fast Attach the official (supplied) mount to the camera first, then print and mount this bracket in as many rooms as you…
This specific VTech baby monitor is one of my favorites due to it supported both direct wireless as well as Wi-Fi connectivity between the cameras and the parent unit (with app viewing via Wi-Fi), but I found the parent unit to be very…
Mikro Holder for VTech Kidi Super Star DJ
A selector which can run VTech Baby 80-194404 including the railcart. I've used 608 ZZ Bearings for the gears. The gears are quite sloppy (as intended) so they are not really needed but you would need to remix the model yourself. The…
Jen kopie malé krytky, která se používá do otvorů na podiových deskách Nivtec. Tištěno na MK3s z PETg
Battery cover LeapFrog Magic Adventures Globe Cache pile VTech Genius XL Globe
A basic mounting piece for VTech baby monitors. It can be attached to surfaces using glue or double-sided tape
Ersatzteil Batteriedeckel für Vtech 119404. Spare part battery cover for Vtech 119404.
Our daughter is going through the phase where she likes to give all her toys to our (heavy chewer) dogs. As such, most chewable toys aren't long for this world if they're out of our sight for more than few minutes. Rather than letting the…
Often, a used VTECH Leaning Walker toy will have a few missing parts, such as the hide-and-seek door or phone. These are not identical, but I believe they are an improvement on the original design.
This is a thingy i made for my baby monitor as the kickstand busted off it. Print in place and snaps on. No Hardware needed. Fun little design project i hope someone else can use. PETG is what i used for all prototypes and final part.…
This is a wall mount to attach the VM5254 Baby Monitor to a wall using Wall Screws and one M4 Nut and Bolt. My second hand baby monitor didn't come with the mount.
Designed to copy the VTech Go! Go! Smart Wheels Train Station Playset 's support for the elevated track. Shouldn't need supports if printed standing up.
I didn't like the camera mounts that came with the cameras since they were kind of flimsy and required me to put holes in my walls. I printed this to use with command strips but you still have the option to use screws.
My son broke the attachment mechanism for the removable learning center on the Vtech Sit to Stand Walker. Pieces were lost. This part is my best guess at what the original might have looked like. It is a functional replacement and if I…
Suite à la casse du loquet du couvercle du logement des piles d'origine de l'appareil photo de ma fille, j'ai modélisé et imprimé une nouvelle pièce. Fonctionne très bien, plus resistant que celui d'origine. Imprimé en PETG remplissage…
need supports 0,12
I mounted this to the wall using a 3M adhesive strip but screws could easily be used. 15% Infill with organic supports using PLA+ g-code for Prusa Mk3 i3 included
This is a 2-Piece Design, Intended to be Wall Mounted and Hold the Vtech VM901HD Baby Monitor (Camera). This Cup Style Design Allows for Easy Access to the “On/Off” Switch and Also Plenty of Room for the Power Cable. I Designed This with…
Removable Bottom Shock retainer to change springs on Dravtech Shocks
Kappe zum Abdecken der Löcher in nivtec Systempodeste.
This is a replacement belt for the ramp that is included in the VTech Go! Go! Smart Wheels Train Set. Print in TPU
Monture de camera pour lit de bébé camera bébé vtech RM5754HD Rentre à la serre pour le modèle de lit que j'ai.
Eine Fusskappe für nivtec Bühnenpodest Füsse.
Welcome to the club where redline is a lifestyle. This VTEC Club keychain is a tribute to the golden age of street racing and the legendary high-revving VTEC engines that defined a generation. Inspired by 1990s racing aesthetics, this…
# GrovTec GTSW230 6 Inch 15 Slot Keymod Black Anodized [Product link](https://www.ozgunmart.com.au/grovtec-ar-foreend-picatinny-rail-adapter-6-15-slo~120813) ## Printing Guidelines: The printing orientation is as provided in the file. The…
The original upload by Melted-B was not optimized. I printed one in the horizontal position with supports and it did not turn out well. The bottom was stringy and the end tabs broke off almost immediately due to the orientation of the…
I needed a way to temporarily mount our Vtech Baby Monitor Camera while our young one is in a bassinet next to our bed. I wanted some sort of adjustable stand, but anything babyis super expensive. So I came up with an adapter that…
Needed a way to attach my VTech baby camera to my safe to monitor the baby while in her basinet. Added 2 magnet slots on the back for a strong attachment. I originally only had one set of magnets but with the angle the camera was, it was…
Simple, provides plenty of angle for a wide view of the crib and not too askew or off horizon axis. Print with supports, tree worked well for me. May want a brim as one corner lifted but was still functional.
Over engineered under cabinet friction mount/holder for VTech VM819 baby monitor 2.8" Display. Attaches under cabinet using 3M double sided tape. The triangular truss design allows for the charging cord to pass through the model. Use it…
Without the battery clip the camera is rubbish. The spring mode also works with this clip.
A holder for the Smart Cards/Slides that come with the Microscope. Design need to be glued on (I used doublesided tape on the curved part at the front). I printed it with the angled bottom of the holder flat on the bed and used support.
I got this game at a yard sale but it only had one vehicle. It turns out that you need the other vehicles to play all game modes. if you have none of the vehicles, it's really limited. These will replace any missing vehicles. Just print…
Lower Microphone holder for vTech Kidi Superstar or Kidi DJ
VTech Kidi Star Karaoke Machine https://www.vtechkids.com/product/detail/18573/Kidi_Star_Karaoke_Machine The ABS piece that holds the microphone adjustment arm tore in multiple pieces. I recreated it and have printed a successful version…
Replacement battery cover for the VTech Tut Tut Bolide toy. Compatibility may vary between models, tested on airplane.
My wife and I were tired of having the baby monitor light up the room all night. This was an easy fix. It isn't attached to anything and rests right on top so you are still able to move the cover to check on your little one during the…
If you find my designs useful, please consider sending a tip Replacement battery cover for the Vtech Challenger Laptop Print Settings: Quality: 0.2 Infill: 20% - 40% Brim: Yes (Personal Preference) Supports: Yes Material: PLA Print…
The mechanism works normally (walker recognizes when its open and closed). Its easy to print - just print in the orientation of the model. It might need tiny bit of support on the hinge. I printed in PETG and I recommend using archimedes…
Little TPU bar to place between the monitor and the stand created by @akaderby so that it holds better in the stand and doesn't slip. Printed with 99% infill.
Adapter na uchyceni Astera pod Nivtec
Replacement wheel for Vtech toy cars. Hopefully fits all models. Just print two of the provided part with 0.15 layers or finer with 100% infill. Use CA glue to attach them on the wheel shaft.
This is a friendly smart watch stand for a kids vtech dx2 smart watch. Perhaps it's fitting some other smart watches too. Printed mine in a comibation of Prusament PETG Jet Black and Prusament PETG Neon Green Transparent at 0.2mm layer…
This model is for an easy print to mount up the BM5150 or similar Vtech 5" parent units to the wall. While rough around the edges due to minimal refinement it does the intended job fine. Prints on untuned machines reasonably well and in…
I had our baby monitor sitting on the side of the crib but it kept moving as our baby would kick and move so I made this shelf to mount it to the wall instead.
Ich habe eine Halterung für das VTECH-Mikroskop unseres Kindes entworfen, in die die mitgelieferten Objektträger perfekt passen. So sind sie ordentlich verstaut und liegen nicht mehr lose im Kinderzimmer herum. Die Halterung sorgt für…
Made a mount to hold a Vtech VM5267, though any object of similar dimensions would fit.
Generic pack-n-play mount for a VTech VM5267 camera. Tested and works on our Guava Lotus travel crib. It should also work on a Graco or pretty much any pack-n-play. If the mount is too loose, you can stuff a burp cloth underneath to give…
I recommend printing the bolt at 105% scale, depending on your printer's resolution. You’ll also need to download the camera base from @Skyline0439’s file. I didn’t include holes in the wall-mounted part, as it’s designed to be installed…
This Plate is for Mounting Vtech VM901 Baby Monitor Camera Unit to a Vertical Wall / Surface. Plate Dimensions: 61mm Ø x 5mm Thick (+ Top Mounting Tabs) Screw Hole Dimensions: 4mm Ø (Shaft Hole) Screw Head Dimensions: 7.5mm Ø x 3mm Tall I…
This is a looping for VTech Marble Rush. It is based on the VTech Marble Rush design from @SmarThuis. To prevent the connectors from breaking, print the protruding connector parts horizontally.
New switching arm which requires an M3 (OD 4mm) insert in the track. It uses an M3 screw to hold it down to the track. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Mechanical Toys
The vTech Sandy Snacks-a-Lot Axolotl is a fun toy that has 8 plastic “meals” my daughter feeds it, by putting them on its mechanically articulated tongue. There is built-in storage for these in the toy itself, but my little one had…
This clips onto the side of the bassinet with bar sized 23 x 41 mm Compatible with RM7766HD but others that has the 8mm hole attachment as well Printed on its side with supports for the attachment points.
EasyFrom 1970 1984 1996 2000 2001 2003 2005 2009 2010 2013 2017 2023
This is the ideal mount for VTech Interactive Microscope Smart Slides. No adhesive or screws needed; simply insert it in
The Socrates is pretty easy to composite mod, just by unsoldering the RF box from the ribbon cable and then tapping off (from the left) the first (audio), second (ground) and third (video) wires. This box will then sit in the same area as…
Made a simple tool to help push down the lockring on Traxxas Big Bore and Dravtech shocks. Printed in PLA at 0,12mm layer height. 50% Gyroid infill
Just a silly little 3d model for people that like honda engines
Our VTech Alphabet train is about 10 years old now and one of the axle pins snapped. I modeled it and it works great . I recommend printing with 4 walls using PETG since it is more flexible. Also recommend printing it at 45 degrees to…
Have this "amazing" VTech Walker which you're unable to sell on eBay for some time now?! Have this plywood toy box which is being dragged around the room scratching floor surface?! Boom... Box Wheeler!!! I've only repurposed 4x wheels and…
The additional nut needed to lock the camera angle in position. We had lost ours, so printed a new one.
Adjusted thread size and diameter
VTech Babyphone Halter ca. 19-21mm
Ready to Race Lightning McQueen from VTech Neighbours kid lost the plastic pieces to select modes in this toy. No way to buy them the product seams to be out of production since half a decade. Just a few gram Prusament and some fun with…
I wanted to mount my baby monitor in a temporary location so I wanted to avoid drilling holes. Layer lines aren't the strongest in the orientation I printed, but I wasn't concerned about it being bumped, but you could try printing…
Out baby monitor camera wouldn't angle down enough to see into the cot. The camera base slots into this model to mount it sideways and allow a greater angle.
Adapter for motorcycle rear wheel balancer VFR800 Fi and VTEC.
Replacement ramp for the Vtech Tremplin Super Cascades Vtech Tut Tut Bolides 8296006 I use freecad and a python script to generate it, you can use the python script to ajust the ramp and connector, you need the…
This is a thingy i made for my baby monitor as the kickstand busted off it. Print in place and snaps on. No Hardware needed. Fun little design project i hope someone else can use. PETG is what i used for all prototypes and final part.…
Replacement battery cover for the VTech Tut Tut Bolide toy. Compatibility may vary between models, tested on airplane.
![[REPLICA] GrovTec GTSW230 6 Inch 15 Slot Keymod Picatinny Rail](https://media.printables.com/media/prints/eae493a0-47f2-4bf5-bc17-28a455c0a74b/images/10239750_391bc8e2-1bbb-499a-8c3b-e210203abea5_45f9e104-28c1-4521-81cc-70f34d7ab2a7/screenshot1.png)
