Liczymy pasujące modele…
Do zestawu, autorski brelok 3D przedstawiający stylizowaną głowicę wilka osadzoną na tarczach z ostrymi kolcami. Projekt łączy nośny minimalizm z wyrazistym charakterem – idealne gadżety dla fanów motywów zwierzęcych i stylu fantasy.…
Edit: 1/15/2024 Highly recommend the EMG T set that the YOYOMAKER remix was built around, including the modified control cavity piece. This is IMHO one of the best T kits around and it's a drop in replacement for the Bexgears pickups.…
Safety Razor Cove A practical cover for the Wilkinson safety razor model "classic". Notes: The case is quite tight, so it does not slide down easily. Therefore I recommend to use PETG as it is a bit more flexible. Feel free to support my…
Remix of razor holder for M3 tape (https://www.printables.com/de/model/437427-razor-holder/remixes)
Mounting Bracket for Bowers & Wilkins FPM6 Speaker
When traveling with your Wilkinson Sword keep yourself and your razor protected with this handy cover. Fits on the razor nicely with a tight fit. Parameters: If the tight fit does not work on your printer you can change the parameter…
I printed using PLA as well as PETG filament at 0.2 and 0.12 thicknesses. In all cases the print came out very nice.
A compact and sturdy wall-mounted razor holder designed for Wilkinson Sword Hydro and Xtreme series razors. It shouof fit other brands as well. Perfect for keeping your razor dry, clean, and easily accessible in the shower. The holder…
The B&W P6 speaker has the iconic external tweeter pod. The tweeter is protected by a mesh “basket” that is connected to the pod housing by a retaining ring that snaps onto ridges on housing. Most P6s on the used market no longer have…
Printed with PLA, 5% infill and organic support. Best to print with the hole part facing top.
I made stand for metal razor, straight edge barber razor and shaving brush
If you are looking for a good and cheap back razor, you can use this arm to get to your back with the Wilkinson Sword Classic razor. Advantage: It is very cheap (I bought it for 2.75 € with 5 blades on Amazon ) and also the blades are…
I loved my Px, but they have silly flimsy arm designs (thanks to Native industrial designs for being very practical), and mine broke after a few years of abuse. Supergluing the arm back into the slot was ineffectual because there is…
Posted originally in youmagine: https://www.youmagine.com/designs/wilkinson-classic-razor-case
Ein Schlüsselanhänger für unseren Wohnwagen - Zweifarbiger Druck mit einem Filamentwechsel. Das .stl wurde mit https://itslitho.com/ erstellt! “WILK” ist eingetragenes Markenzeichen des jeweiligen Inhabers, zu dem ich in keinerlei…
Whenever I needed to take my razor with me, I used to stick some tape on the blade, so that it was safe and the internal of my backpack as well. Obviously this wasn't the best solution and because of the fact that there is a 3d-printer…
Easy way to differentiate keys is by color code. Pause just before printing the top, place the key, continue, clean the hole - Voila tried with PLA and PETG, added top load options too
Do you have an extra or perhaps old Wyze cam taking up room on a shelf? Have you ever wanted that cam to look a bit like a milk carton? Good news! We have models for you that might fit (if you have a V1 or V3 cam). People will ask, “How…
For those who has Switchbot Lock Pro and want to install it on Wilka 1405 lock cylinder with round knob, original knob you can remove simply by pushing out metal rod from center, next just put adapter and lock it with original rod.
Wanted to resize the Planter 02 and made its walls thinner, had to fix some references in the features for that.
Made to Snap Fit Wilkinson Sword Double Edge Safety Razor. Might fit others. The Cover Snaps in Place Thanks to the State of the Art circle Placement. Print at 0.2mm Layer Height Recommended. Printing took 50 Minutes for me. If you Print…
I designed this pot holder to fit the Wilko 6cm bio-degradable fibre plant pot. Inspired by the Skelly style tray that allows air to get at the sides at the pot. I've also included a version of each size without the cut-outs for anyone…
Cover for Wilkinson Classic
This is a part for a "George Wilkinson Health Grill and Panini Maker" that broke off on mine. This is the left side, so flip the model horizontally in your slicer if you need to print the right side.
A simple variation of satchm0h's model with the addition of a smaller ring
This is a Snap on Blade Protector for the Wilkinson Sword "The Edger" so that it doesnt damage your toilet bag. It is desgined so that you can snap it on. The fit is tight, no rattling. I printed it on an H2D in ABS with 0.2mm Layer height.
My Razor has a bit other geometry than the Edwin Jagger Razor used by pumikachu. The original was increased to 115% and a hole for the handle was added. Just import the geometry, that should work… Printed in 3DJake PETG neon orange. Not…
after the 3rd of the footcaps of this Wilkhahn Flipchart Model 442/1 fell out we decided against glueing it back but make a set of new ones, with strong fit. Works in PLA. Recommended to print “sole up” and activated ironing for a smooth…
This is a remix of SEDAudio's neat little support shims for the Bower's and Wilkin's PX series headphones. Like so many others, mine snapped off where the stamped metal ear-cup support pinned into the rolling skull-alignment barrel. The…
Just another cap for razor blades...
Gedruckt in PLA mit schichthöhe 0,2mm. Model steht auf dem kopf und muss gedreht werden damit der Radius der Kugel oben ist.
Fast and easy print No support or brim Protects the blade from being damaged in your toiletry bag Protects your fingers from being hurt when you pick your shaver out of your toiletry bag The Blade can dry inside the case If you use…
This adapter plate allows fixing the Bowers & Wilkins 705 S2 to the Atacama Nexxus Essential 600 by using 4 pcs M6 x 25 screws. Printed on Prusa Mk4, 0.2mm structural, Prusament PETG, 20% Gyroid infill
I was going to try to market this tool and license it to Zurn/Wilkins but never did. I'm posting it here in hopes it'll help others that struggle with the terrible design when repairing a relief valve. The smaller 1" and below didn't have…
Printed with 0.4mm nozzle. 0.2mm Layer height with seams painted on the outside.
changed the inside so it fits my double edged razor holder better
Graduating in 2020 is unfortunate due to the pandemic, so I had some spare time and sketched the school's logo in Solidworks. Inserted a filament change in the g-code at layer 22 through Cura. The blue is only on one side if anyone else…
Replacement peg for the cheap Wilkinson's branded plug-in timers. I think it's a generic product re-branded. Link to the timer (for reference purposes, I do not endorse)...…
The Wilkhan “ON” is a great office chair, but on older/used models the back rest keeps sliding down. I made this model to prevent that, to keep the back rest in a raised position with the lumbar support where it needs to be. The spacer is…
A basic double edge razor stand for the Wilkinson Sword. Includes a drainage hole at the bottom to reduce mold growth (I don't know if it works). Shaft diameter is 13.1mm to account for PLA shrinkage compensation. It may work for other…
Print two of these per speaker and stop wasting money on speakerstands which are too expensive, just get the Stav 24 and convert them to accept 7xx bookshelf speakers. I DO not recommend printing in PLA because it will degrade in the sun…
Needed to repair my leaking anti backflow valve on my irrigation system because the so-called spider assembly got damaged. The repair kits can get quite expensive so I thought I'd design my own--at least the non metal components. The…
Náhrada originálních "klíčů" od skříněk karavanů WILK ( v mém ořípadě Stern DeLuxe). Tištěno z ABS vrstva 0,2 - 100% výplň - 3 perimetry
Slip on cover for razor
Made to Snap Fit Wilkinson Sword Double Edge Safety Razor. Might fit others. The Cover Snaps in Place Thanks to the State of the Art circle Placement. Print at 0.2mm Layer Height Recommended. Printing took 50 Minutes for me. If you Print…
Stand for the Wilkinson Sword Intuition Body Shaver
This is the key case that you can open and close. There are two variants: with snap connections and flag. For the snap one I recommend using smaller nozzle like 0.2 mm, do the snaps can be printer. The flat one can be printed with standay…
Accurate measurement for 5mm, 10mmm 15mm, 20mm. If you have to raise the router yourself just place the gauge over the opening and measure the height in the 4 increments stated. Print size is 90x90mm or 3.5 inch. Same size as a floppy…
