Wilkhan "ON" Chair - Fix For Sliding Back Rest
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wilkhan "ON" is a great chair, but the back rest of mine kept dropping. Not anymore.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
The Wilkhan “ON” is a great office chair, but on older/used models the back rest keeps sliding down. I made this model to prevent that, to keep the back rest in a raised position with the lumbar support where it needs to be.
The spacer is designed to not damage the upholstery and not getting in the way. I printed two of them and placed them on each side against the rails of the chairs sliding mechanism.
The model as is keeps the back rest at near maximum height. I included a .step file for easy modification should you require a different height. Alternatively, you can simply use your slicer's “scale model” function in one dimension to reduce the length of the spacer.
Material: PLA (or any rigid material)
Orientation: Flat on the build plate
Supports: None
Brim: None
Infill: Not needed, maybe 10% or so makes sense.
Walls: 3
Top/bottom layers: 4