Wilkhan "ON" Chair - Fix For Sliding Back Rest
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wilkhan "ON" is a great chair, but the back rest of mine kept dropping. Not anymore.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 126
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
The Wilkhan “ON” is a great office chair, but on older/used models the back rest keeps sliding down. I made this model to prevent that, to keep the back rest in a raised position with the lumbar support where it needs to be.
The spacer is designed to not damage the upholstery and not getting in the way. I printed two of them and placed them on each side against the rails of the chairs sliding mechanism.
The model as is keeps the back rest at near maximum height. I included a .step file for easy modification should you require a different height. Alternatively, you can simply use your slicer's “scale model” function in one dimension to reduce the length of the spacer.
Material: PLA (or any rigid material)
Orientation: Flat on the build plate
Supports: None
Brim: None
Infill: Not needed, maybe 10% or so makes sense.
Walls: 3
Top/bottom layers: 4