22 modeli
The case fits this board: https://github.com/Freenove/Freenove_ESP32_WROVER_Board One m5 nut or bolt is needed if you want to mount the case to something. I printed the case in PETG. You have access to all pins and micro usb port as well…
These cheap ($20AUD) ESP32-WROVER CAM Board's make a great little standalone wireless streaming webcam module, that can be easily attached to any printer. Specific board:…
A remix of mhparsons Prusa camera mount. The cable channel has been modified to accommodate a usb cable - this does unfortunately mean it needs multiple supports. The included g-code file has supports painted on in all the necessary…
A remix of the case and the lid. Bigger USB C hole Add air tunnel for better cooling (back of the board) Add air slot for better cooling Air (sides) Add better finish on the lid's top. Less material used. Need Support for the case.
Box for a Freenove ESP32 board with cam. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 20 Category: 3D Printing
This model lets you mount a Freenove ESP32-WROVER board (buy from their global site or Amazon ) in your enclosure and use it to automatically upload images to Prusa Connect. The mount provides two degrees of freedom to adjust the aim of…
Notice This enclosure is still quite small to host other modules with it, unless you remove pins and solder directly to the dev board. About: Modification of General purpose ESP32-WROVER Web Cam module Mount . - extra holes for air…
Print without support. Box and lid
A basic case for the esp32-s2-wrover . Holes for the gpio pins buttons and rgb led. I used m3-10mm screws to fasten it together. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Infill: 15 Category: Gadgets
Two options, a simple tower (that is larger) and a more compact option that requires that you bend the pin and add a pin-guard (to prevent the pins from shorting out). Neither option require any soldering. Prints easily without supports…
Notes This does not include rotation, so if you want full control of the camera angle you will need to print at least one 90º turn or twist from Michal's set. I recommend Gopro_Like_Joint_Turn_90.stl My print settings PETG 0.2mm layer…
This is a case for the ESP WROVER KIT V3 (the one with the vertical switches). It uses five M3x25mm screws to keep everything together. The barrel connector is hidden on purpose to prevent damage, when connecting USB and the barrel at the…
Scaling in order to fit: X -> 102 % (+2 %, BOTH parts) Y -> 99.5% (Just on Top_v2FINAL5)
This compact enclosure is designed for the ESP32 WROVER-B module, specifically for use with Squeezelite-ESP32 firmware. However, it's also use for other application and will fit in limited space. I use this module as Wifi to Bluetooth…
A case for the ESP-WROVER-KIT
The ESP WROVER development kit is a great board to have around. It has a good color LCD screen, built in debugger and sells for less than $40 usd. I made a case to house my gateway to my MQTT network. The front panel is square so you can…
Original design had my board's pins sticking out very slightly. I simply made this piece taller to prevent that.
ESP32WROVERと秋月電子2.54mmピッチ変換基板をハンダ付けするさいに使用する治具 セットして、裏のベタグランドを手ハンダする。 自具が変形しないよう、最小に
Case for 18650 battery powered ESP32 devboard Category: Computer
ESP32-CAM Wrover board case top part V2 without header remix
All I had around were 6x2mm magnets, so I remixed it for those. Plenty strong enough. Its a bit of a loose fit for the magnets, so I glued a thin piece of card to the bottom to hold the magnets in place. I plan to replace the whole thing…
Notice This enclosure is still quite small to host other modules with it, unless you remove pins and solder directly to the dev board. About: Modification of General purpose ESP32-WROVER Web Cam module Mount . - extra holes for air…
