General purpose ESP32-WROVER Web Cam module Mount - mod with ventilation holes and gopro mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added extra ventilation and gopro mount to be glued on the case.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 140
- Wydruki
- 0
- Wyświetlenia
- 846
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Notice
This enclosure is still quite small to host other modules with it, unless you remove pins and solder directly to the dev board.
About:
Modification of General purpose ESP32-WROVER Web Cam module Mount.
- extra holes for air ventilation on the side of the antenna
- flat top (no insets for screws) to allow gluing other parts such as GoPro mount, also no insets allows to add other small electronics for example temperature/humidity sensor such as AHT20 or BMP280
- GoPro mount with 1mm 20x20mm base, to be manually glued to the back or front (depending on the use case).
Please give a like and post makes and provide comments for further improvements.
Print:
PETG 0.2mm, models are small enough that print without supports is possible.