Liczymy pasujące modele…
A case for the WT32-ETH01 with a USB Type C trigger board for power. The top snaps into the body, no screw needed here. Also needed: 5 V USB Type C Trigger board, female, e.g. https://www.aliexpress.com/item/1005005995374256.html jumper…
This is a case that I designed for WT32-ETH01 module. The case fits a WT32 module and a TP4056 Li-Ion charging module (without battery protection). This charging module is not actually needed here for charging since there is no battery in…
A case for the WT32-ETH01 with a RS485 module and USB Type C trigger board for power. The top snaps into the body, no screw needed here. Also needed: TTL to RS485 Converter Module, e.g. https://www.aliexpress.com/item/32853794532.html 5 V…
Base needs supports in order to print the zip tie holes correctly. I may post a model without them so no supports would be needed. I can easily change the angle of the screen, currently it is tilted back about 18degees. Just send me a…
Best fit is to print it on 0.2mm (standard settings for either Prusa, Bambu, Voron or other printer). 3mf file is including text for printint in multiple color.
This is a 3D model of the WT32-SC01 microcontroller board with 3.5" touch screen. It is not a case and it is not for 3D printing . Use this model to integrate it into larger designs in your preferred CAD program. I originally found a…
Case to hold your 3.5" TFT Arduino screen
I needed to install a WT32-SC01 Plus device to replace an old outdated alarm panel. Thankfully some pre-existing models existed, but needed some finessing to work. I merged the two models, and added some space to include some double sided…
Holder/mount for wt32-eth01-evo with poe module. this version adapted for specific box/ screw spacing
Press-fit and/or glue Dupont connectors into the cutout on the housing. When set onto the WT32-ETH01 the connectors will be over the correct pins in order to program the chip with a FTDI adapter.
This is an enclosure for the WT32-ETH01 featuring a Type-C connector, with options for including or excluding a POE splitter. links to the module: POE Splitter 48V To 5V Or This Type C Connector WT32-ETH01 Or This I was searching for a…
This is a housing for the ESP32 board WT32-SC01 with 320x480px LCD and two sensors: - SEN5X (PM, VOC, Temp, Humidity, NOX) - all SEN53, 54 and SEN55 have the same form factor - SenseAir S8 (CO2) The back cover is holding the sensors in…
This is a case / stand for the WT32 SC01 Plus Display module. The module just snaps into place and there is a reset button on the back. The stand is self standing but can also be attached to a surface using screws, magnets or glue. The…
This is a case / stand for the WT32 SC01 Plus Display module. The module just snaps into place and there is a reset button on the back. The stand is self standing but can also be attached to a surface using screws, magnets or glue. The…
Das dazugehörige Gehäuse MG-01 findet sich hier: https://www.printables.com/model/1144564-modulares-gehause-mg-01-fur-esp32-arduino-raspi-il Das dazugehörige Gehäuse MG-02 findet sich hier:…
The WT32-SC01 is a low cost wireless touch panel device. I have installed the firmware OXRS on this device and use it to control continuous print jobs, and query the printer through the API provided by OctoPrint. So I needed some way to…
I wanted to create case for home assistant voice command device based on wt32-eth01. Mic should be separated and should not touch the case so i am gonna use soft double-sided sticker. One day I will create the top for the case🙂
I created this print to mount a WT32-SC01 display into a regular single-gang electrical box. The print consists of two parts: The backplate mounts to the box using the standard holes, and has pins that line up with the holes in the…
This is an enclosure for the WT32-ETH01 featuring a Type-C connector, with options for including or excluding a POE splitter. links to the module: POE Splitter 48V To 5V Or This Type C Connector WT32-ETH01 Or This I was searching for a…
I created this print to mount a WT32-SC01 display into a regular single-gang electrical box. The print consists of two parts: The backplate mounts to the box using the standard holes, and has pins that line up with the holes in the…
I wanted to create case for home assistant voice command device based on wt32-eth01. Mic should be separated and should not touch the case so i am gonna use soft double-sided sticker. One day I will create the top for the case🙂
Case to hold your 3.5" TFT Arduino screen
This is a base for the WT32-SC01 Plus module. The design is made for the FriendlyStack Reminder project (please support) but will obviously work for other things as well. In contrast to the original design, this model has a larger base so…
I created a housing for my WT32-SC01 touchscreen with ESP32 that I use with the FreeTouchDeck software. Both parts print without support. Used Parts: WT32-SC01 4 x M3x10 counter sunk screw Software:…
A Remix for a esp32 (WT32-SC01 Plus) based Display in combination with OpenHASP
This is a modified version of WT32-SC01 case created by mbenten on https://sketchfab.com/3d-models/wt32-sc01-case-cfec05638de540b0acccff2091508500. I just only adopt it to the newest version of WT32-SC01 3.3 in which reset switch is moved…
Need 4 M3x12mm screws. The usb charger module is only supplying 5v to the WT32. Category: Electronics
Having built-in WiFi is nice, but not for bed levelling and quick z offset adjustment. But it could be used for anything else. If your screen has nuts it shouldn't need the spacer. If not the spacer provided can be cut down to size in…
Description Case for WT32-SC01. Display: The WT32-SC01 incorporates an ESP32-WROVER-B module with a 3.5-inch capacitive touch display. http://www.wireless-tag.com/portfolio/wt32-sc01/ Print settings: Printed via 0.3mm layer height.
I use several displays with ESP32 and openhasp firmware. I created a case to mount the display on my ender 3 enclosure. Following parts are also needed: Screws: 2x M3x 6mm + 2x M3x10 + 2 M3 nuts + 2 woodscrews 3x12mm Heatinserts: M3x5x5…
This is a minimal enclosure for the WT32-SC01 ESP32 Dev Board. The case was designed around the V3.2 dev board, which has standoffs on the corners. They are only used for positioning the board inside the case. Enclosure Features: Reset…
This is a minimal enclosure for the WT32-SC01 ESP32 Dev Board, that incorporates a USB-C charge controller, Li-ion battery, and power switch. The case was designed around the V3.2 dev board, which has standoffs on the corners. They are…
(work in progress) Supports are necessary for the front part. Organic supports like in Prusa Slicer work fine. In order to mount the module the display needs to be separated from the board. The large hole in the backplate can be used to…
Small case for wt32-eth01 with a usb c port for charging. I use the module for BTproxy with esphome and just need power to it. Used these from Temu…
This is a case / stand for the WT32 SC01 Plus Display module. The module just snaps into place and there is a reset button on the back. The stand can be attached to a surface using screws, magnets or glue. The model is optimized for SLS…
This is a case / stand for the WT32 SC01 Plus Display module. The module just snaps into place and there is a reset button on the back. The stand can be attached to a surface using screws, magnets or glue. The case was designed for the…
This is a case / stand for the WT32-SC01 Plus Display module. The module just snaps into place and the cable is hold in place by a specifically designed groove on the bottom of the case. An angled USB-C connector is required to connect…
