Wyniki wyszukiwania: x43

Traxxas Xmaxx Impulse Pro-Loc MX43 Rings

I posted these before on thingyverse, but I dont like that site, just too slow, so as I am moving to this, thought I would share the design here too.

Sushi Maker 202x43mm

As a family, we like sushi nori rolls. Making it at home means we can come up with our own stuffings. This sushi maker is a revision to my past design. Perhaps not traditional Japanese, but we find it useful. This design accommodates the…

LM2596 step down 21x43mm mount

This is a remix of http://www.thingiverse.com/thing:2154260 snug fit for the popular 21x43mm boards. Mount the PCB with m3x4 screws. The v2 version has mounting holes that are 58mm apart, which is the same as for the Raspberry Pi. That…

Ratrig 500 Quick Bed Level test 7x7sq 430x430mm

Added a beacon and wanted a very quick 1 layer test of the bedmesh. Takes me 6 minutes to print and only 4 g of filament. All squares are connected so easy to pickup off build plate to discard. 430x430mm at 0.3mm layer height, for 500mm…

Linksys MX4301 /LN1301 shelf

This doesn't need supports, it leaves lots of room for airflow throughout the bottom, and provides 6 mounting holes for flexible options. Pick any two. The base is oversized enough that this isn't a tight fit, and the cables can exit…

Zebra GX420t GX430t ribbon holder(NEW)

It's a Ribbon Holder Replacement for Zebra GK420t/GX420t/GX430t Thermal Transfer Printers. I printed with 100% infill.

Cutting disc blade for Navimow X series X420 X430 X450

Cutting disc blade for Segway Navimow X series. Consist of two parts for easier printing without support. You will need 12 M4x20 hex screws and 18 M4 nuts. You can use original segway blades. When printed, holes for blades will be blocked…

Single relay mount 24x43mm

This is a remix of http://www.thingiverse.com/thing:825862 , snug fit for 24x43mm boards. Mount the PCB with m3x4 screws. The v2 version has mounting holes that are 58mm apart, which is the same as for the Raspberry Pi. That way it is…

LDARC x43 with m58 tires

You can buy as spare parts the tires for the m58 monster truck and mount them with this adapter, the m58 tires are a lot wider than the x43 rims so this adapter presses the tyres to gain the right width, also by compacting the tires you…

Platen Roller Bearings/Clips for Zebra GK420T, GX420T, GK430T, GX430T

Platen roller bearings/clips for the Zebra GK420T, GX420T, GK430T, and GX430T. I've personally designed and tested these with my GX430T. Intended to replace the OEM ones from Zebra, designed with ease-of-print in mind without supports.…

Mini Solar Panel Mount (56x43mm)

Beveled edges provide for a nice fully exposed surface that is difficult for roving miscreants to remove and deflects water/wind. Internal standoffs support the panel at its optimal height. Side notch allows for easy wiring. Watch the…

Motor terminal block cover 99x99x43

Motor terminal block cover 99x99x43

.350 Legend/9x43mmRB Cartridge

Gridfinity Base for IKEA HEMNES (Top Drawers – 390x430mm)

This model is a Gridfinity base designed specifically for the top drawers of the IKEA HEMNES Chest of 6 Drawers . Drawer internal dimensions: 390 mm × 430 mm . It was generated using gridfinity.perplexinglabs.com , then fine-tuned to…

8.6mm Blackout/8.6x43mm cartridge

World map 65x43cm (6 pieces) by 3DOffice

1,2mm thick Set pause at layer 4. If you're smart, print them on a pre-made PLA sheet instead of wasting time and filament on three full layers across the entire print bed! Core One pre-slice included. Yes I know I should reprint Oceania… 😅

6.8 Remington SPC/6.8x43mm Cartridge

Support thermomètre 43x43mm

Prévoir vis M5 ou M6 longueur 20mm avec écrou. You need 1 screw M5 or M6 lenght 20mm with a nut.

LMS2596 Support (21x43 PCB)

Simple LMS2596 bracket

Folded box 43x43x70mm

There is two styles of the end caps.

LDARC X43 Custom Body Concept

LDARC X43 Custom Body Concept, first of all this does require that you have: removed the pcb from your original body mounted the pcb on the frame with double sided tape or similar moved your battery removed the original battery holder -as…

LDARC X43 PCB Bumpers

LDARC X43 PCB protector for doing custom bodies, attach cut rubber bands as in picture to constrain the parts together. This also works well for “friction fitting” custom bodies I have designs for. (The wheels visible will have designs by…

LDARC X43 Custom Tire Extenders/Expanders

LDARC X43 Custom Tire Extenders/Expanders - print in flexible material and add gripping material like anti slip mat, cut down to size. Adds a lot to ground clearance - see the comparison pic, the scales of the two photos is matched even…

Schneider Electric TH05 43x43x10mm

it's to hang TH05 temp sensor 43x43x10mm in to Schneider Electric It isn't covering any sensor. It's easy to print. It's easy to remove. For more please suport.

airco wheel riser 37x43mm

riser for small 37x43mm wheels. It rises it bij 40mm. total hight is 55mm.

Mounting bracket for Linksys MX4300

Corner mount for Linksys MX4300. Can fit Legrand media cabinets.

Platen Roller Bearings/Clips for Zebra GK420T, GX420T, GK430T, GX430T

Platen roller bearings/clips for the Zebra GK420T, GX420T, GK430T, and GX430T. I've personally designed and tested these with my GX430T. Intended to replace the OEM ones from Zebra, designed with ease-of-print in mind without supports.…