1946 modeli
Buy a printed fidget cube from me directly: AustinMakes.etsy.com An addictive fidget toy that you won't be able to set down! Prints in one piece and works right off the print bed. Note: vertical hinges will be stiffest after printing, but…
Made to fit snuggly so that it doesn't wobble. I also added some foam tape on the outside for even better fit. Confirmed fits 2015 Camry and 2019 Kia Sorento but should fit most 3.2 inch car cup holder. Probably should use filament with…
I created this tray set for the printables catch-all contest (01/2023). The goal was to get away from the usual box shape and right angles and offer a nice place for your belongings. These trays resemble presenting plates in irregular…
Saw the 16 part fidget cube (https://www.thingiverse.com/thing:3753469) and had printed the Yet Another Infinity Cube V2 multiple times and wanted to print the 16 part. Then I notice it was based off the V1 infinity cube so I used fusion…
This is (hopefully, don't actually know) a strong version of Yet Another Fidget Infinity Cube V2. I noticed that whenever it broke it was almost always on the part of a hinge that goes in side one of the cubes. To fix this, I just made it…
I came up with this simple and quick yet strong 3d printed peg which doesnt require any assembly, one has smooth jaws and other one has small teeth. I strongly recommend print with PETG as the spring from PLA doesnt really hold up that…
Why Yet Another Drybox Design? I was looking for a storage solution for my filament, but the popular designs I found weren't right for me in terms of size or didn't meet all of my needs. I finally found some storage containers on Amazon…
About YATT - Yet Another Temp Tower is not too different from other temp towers available. However, it features a bridging test as well as a 55 degree overhangs test. It is also stackable so you can keep your printed temp towers for…
This is YACS. (yet another calibration square) Update 24-04-2019 Added new vertical test piece Update 30-10-2017 Added vertical test piece Update 26-10-2017 Flat corners now stand on the exact square corner. Corners are now named. The…
This is a variation of the Infinity Cube. No assembly required. To be printed with 0.2mm layer height and 20% infill. If the model appear to be too restrained in the joints after printing, and using it does not fixing this, heat your bed…
Inspired by the toothbrush-chaos in most of the shared appartements I know, I wanted to design something that would solve that issue in the most simple and effective way possible while also being space saving and elegant to look at. It is…
Update April 24, 2019 Parts sized to fit 250mm x 210mm x 210mm https://youtu.be/aASsWYpQr8c Does the world need another Keyblade? This Keyblade is designed to be an easy-to-build kit with parts that screw fit together. No support material…
This is intended to be a somewhat realistic looking flex octopus. Each tentacle is made up of twelve segments. Bed plate adhesion can be a challenge. A textured plate can really help. I consistently print it in PLA on a textured plate…
This clip has been designed to handle spools with a wider frame. In addition, version B has a double-sided fiber groove, so it can be locked on both sides of the clip. Print instructions I usually print it in 0.15 but 0.2 is also accurate…
My old keyboard left me with a large amount of clicky Cherry MX Blue switches, so inspired by FlexiPals Toy Shop model I designed my own version with a slightly less "artificial" (rather unevenly cut) piece of cheese as a keycap.
I designed these cable clips specifically for OpenBuilds V-Slot rail. Other clips I found on Thingiverse didn't quite fit right. Includes 8mm, 10mm, 20mm and 30mm length clips. They can be used to route cables on any machine that uses…
Yet another knight on foot with a sword. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The…
Another Garmin bracket, this time with mountain bikes in mind. The clamp can be printed in place, with no supports necessary. The interface itself is in several parts, to improve durability and make it easier to print, again without…
Hallo liebe 3D-Druckfreunde und Centauri Carbon Fans! Bei meinem Elegoo Centauri Carbon wollte ich mehr Platz zwischen Druckkopf und Glasabdeckung bekommen. Die im Internet kursierenden Erhöhungen waren mir ein wenig zu niedrig, kosteten…
I designed this adaptor for the cupholder in my 2018 F150 to hold either my 14oz Yeti Rambler or 32oz Nalgene bottle to keep them from sliding around the truck. Should fit 2015-2020 Ford F150's and also confirmed to fit in the 2021 Ram…
Overview Yet another fingerboard/fingerboard mould collection. I'm not a finger-boarder. I can't even skateboard. This is just an interesting project for me to tackle. That means that, in my ignorance, I've probably not nailed the perfect…
V2: Redesigned in FreeCAD Updated geometry is now cleaner thanks to a complete remodel in FreeCAD. A STEP file now available to allow for a smoother and faster print V1: Designed in Blender. Bambu Labs matte grey PLA was used in this…
A toothpaste holder that holds the tube vertically and allows you to squeeze its content. Between the bottom cap and the central cage, you need to fit two springs to maintain tension. Then, you can glue the bottom cap to hold it in place.…
Print in light gray or silver PLA (e.g. Apple Aluminum Silver; I used FIL-ALFA GRIGIO METALLIC).
These are some Modern-esk hexagonal plant pots. They have the same footprint and the same built-in water tray. There are smallish holes at the bottom of the inside to allow the tray to serve as a reservoir. The mid-sized one was designed…
Yet another hexagonal dice tray. Just wanted something not too big and portable. Template for cutting out self adhesive felt is included. Post-Printing Get yourself some self adhesive felt. Print out the included template and use it to…
Remix of Yet Another Apple Watch Stand with holes on the bottom for rubber bumpers (I used 10mm diameter, 3mm thick adhesive rubber bumpers)
Yet another Filament Clip 1,75mm
This is an open RC car chassis project. Step files are attached. Remix, update, redesign as you like. You need to print the gears with 0,2 mm nozzle and %100 infill. Rest can be printed with 0,4mm nozzle and %80 infill. I printed all…
I made a cup holder for the larger style tumblers that clamps on the edge of a desk. I have seen other cup holders for these larger mugs but, they are permanently attached to the desk via screws. That is not an option for when I am at…
I got annoyed by not being able to either print of fit the 90º heat bed covers for MK3. So I took inspiration from the last model that I've tried and built my own version from scratch based on the original Prusa source files.
Snapmaker U1 YATC – Yet Another Top Cover The official Snapmaker U1 top cover won’t be available for a while, and most community designs I found rely on custom-cut acrylic windows (accurate, but expensive and annoying to source). So I…
Remixed "MINI-knob" (Prusa Mini) and "LCD-knob" (Prusa MK2 / MK3) by PRUSA RESEARCH https://github.com/prusa3d/Original-Prusa-MINI and https://github.com/prusa3d/Original-Prusa-i3 This knob features a smaller form factor, knurled sides…
My first vase experiment ..... Print instructions print in vasemode
This is exclusively for version 1.0 and is not compatible with Dummy 13 beta.
A barrel. Yes, it's another barrel on Thingiverse. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis are…
A multi part fridge magnet in the shape of Thor's Hammer. Many Mjolnir only come in one piece or are uploaded as just an stl. I wanted to enable people to print it in multiple materials and use their own magnet so I used the model of…
WHAT IS IT? This is “Yet Another Modular Storage System.” The drawers have different sizes to meet your needs, and they pivot downward to make it easier to grab things within. The “single” size is perfect for screws, bolts, nuts, SD…
UPD v23: Fixed wall thinkness issue on top cover UPD v25: Fixed fillet fails to calculate for small “holes"; Fixed top/bot X axis pattern for large boxes (>50mm width) UPD v26: Fixed side wall holes number and offset calculation, now…
The outer ridge keeps condensation contained and the hexagonal pattern keeps it from splashing around. I printed mine out of matte PLA. I recommend printing outer walls first to maintain dimensional accuracy. The fit between the coasters…
I needed a particular size stackable boxes to organise drawer, so I designed this box. The size is 225 mm wide, 187 mm deep and 141 mm high.
Want a squeezer that is simple, sits flat and doesn't distort the empty end of the tube? Here's your answer. Designed for a toothpaste tube that is approximately 54 mm wide. Scale the part in the X dimension to fit your custom tube. This…
Please comment, rate, and post a make! My wife likes ordering the photo books through Google Photos. I wanted to have a dedicated spot for them under our sofa table. A quick search didn't get me what I was looking for so I designed my…
Here is the simple LCD Cover that you can use to.... cover LCD screen of your MK3 or MK2s. Very usefull when your girfriend/wife keeps complaining about screen brightness. UPDATE Version 2.0 Resized to fit on MK3S and MK3S+ screens…
Introduction This model combines 3 hobbies I have: Photography - allows me to take photos. Hot Peppers - Allows me to take photos of beautiful hot peppers I grow in my garden. 3D modeling and printing - Have the joy to create stuff that…
Yet another one of these - why?! I thought the original was well drawn but there were a few things I wanted to change. 1 - Make the walls a little beefier, 2mm thick 2 - Have the lid lock in place without a rubber band. None of the…
Largely inspired by Customizable Rugged Waterproof Box https://www.thingiverse.com/thing:3338826 I which to have a box that does not require any screw, and for the fun of design . This is to print in PETG or ABS with some high infill…
YET ANOTHER IRONING TEST. I've created in orca slicer an ironing test. Found many online didn't seem to translate fully for the K1 profile and had to manually adjust & check the ironing settings for each square, so I just made my own,…
Hey here is another one of those joycon jig tools. I used cat5e wire removed from its protective coating and pushed into the slots. Print at 0.1mm layers or send it off to a high quality print service. Shapeways is great for little things…
Just a small test, how much I can achieve with this design. ;-) Infill: 5% Walls: 6 layers Magnets: 15x5 mm Noise reduction: about -10 dB (from ~68 dB to ~58 dB) in 50 cm distance measured by a mobile with app “Schallmessung”.
Spiral Cones apparently are “the next hot sh1t” in 3D models, everyone needs one, everyone prints one, not everyone models one. Here's my 2cts - mainly because I (as others) have been intrigued by these models and wanted to find out if I…
A simple Minecraft-heart-style clicker. Designed for one Cherry MX switch.
Any tips or donations are greatly appreciated ❤️ Or support on Patreon: https://www.patreon.com/printedencounter
A monitor stand that made to suit my own needs. I designed it from the ground up but used a few designs as inspiration. It uses shelves of 200x18mm and is 150mm high.
I changed location of my printer and decided that I need another purge bucket. After reviewing of available purge buckets, I stayed on https://www.printables.com/model/291141-bambu-lab-x1-purge-bucket which is the best for my purpose. I…
The warm weather is slowly arriving, Mini Yetis have started retreating to the depths of the freezers and refrigerators, but even so, if we are lucky, we can meet free-roaming specimens. Material: Prusament - Vanilla White Layerheight :…
My wife wanted a way to store the Yeti lids but didn't want any shelf space used by the holder. I designed a U-shaped holder that attaches to the inside of the cabinet door. I attached them using some double-sided tape. Gorilla tape…
6 total heads designed for the Dummy 13 model. Enjoy :)
The design is not my idea - I saw it in an instagram feed somewhere and created the model based on that memory. I have tried to find the similar model on model sharing sites as well as here on printables.com but no luck so far.…
This is a screw on adapter for the Yeti Colster 2.0. It adapts to fit a 16oz can. This ONLY fits the new 1/4 turn thread-on cap design. Edit 2023-02-12: Added an extended version to fit 19oz cans based off of another users suggested…
Another MLOK vertical grip. If you like the original Magpul MVG, then you should like this one also. Assembled using two DIN912 M4x35mm screws.
This is my modified version of Yet ANOTHER Machine Vise by TheGoofy, which is awesome to begin with. I had problem with flexible sliding jaw plate staying in place with original design, and since Chris shared the Fusion 360 project, it…
I recently lost my Drain plug to my Yeti cooler. So I made a new one! This project includes one plug that you can use with no gasket. There is another plug too this one is to be used with a gasket, and I've also included a gasket to be…
A family member wanted an adapter for their cup holder so that it could hold their 14 oz Yeti Rambler and its hot coffee safe during their morning commute. A lot of the existing designs did not allow for printing without supports or…
I needed mini vice mainly for holding small PCBs while soldering but did not like existing ones for different reasons so as usual for me I designed my version. I made it with interchangeable jaws in mind so you can print them in…
Roblox Blox Fruit - Yeti Fruit 3 models: 1 all in one with chain which I found tricky to print with supports everywhere and difficult to remove, so I added separate models for the chain and fruit with no chain. Supports - yes.
Posted as a remix for a commenter on my make of the ideal "Satsana Duct Remix for Ender 3v2 - integrated BLTouch mount (4010 + 5015 fans)" , plus the following changes: Added a cross bar between the front of the BLTouch mount and the main…
Looking for a suitable housing for the nozzles and the adapter, didn't find anything. I found many but not all as I wanted. So I sat down and drew the box according to my needs. The specification for me was to make the case as slim as…
> be me >typical monday morning >makes coffee and pours in new yeti mug >was a gift, makes me happy >get in car to go to work >new mug kinda fits in the top lip of the cupholder >eh, I'll just hold it >15 minutes later when a jerk cuts me…
Here is Yet Another Gear Bearing inspired by Emmett Lalish's https://www.thingiverse.com/thing:53451 This adds a hand friendly profile for the ring gear, bevel cuts on the gears to avoid concentrating stress and wear at the points of the…
This accessibility book holder works by placing your thumb into the ring and clamping with fingers. The wedge geometry helps spread the pages of the book for one-handed reading and enhanced grip-ability. Makes for a great gift for the…
Cup holder that holds Yeti 30oz Tumbler to your SUP (Stand up Paddle Board) using the Bunge straps.
what the title says \_(ツ)_/
I was intrigued by the various exhaust fan mufflers for the Bambu X1, and since I had just acquired Fusion 360, decided to create my own version as a way to get up to speed with F360. I wasn't really expecting to make a quieter version,…
Remix of the remix of "The Mad Slicer" (shorter) combined with "Spool Holder Lock Nut Clip" by AgeReyno to use the original printer locking nut. The remaining parts (roller and pins) from the remix by @TheMadSlicer_230707 need to be…
This is a design for a cupholder extender to fit large bottles that don't fit in the normal model y cup holders. This one is specifically designed to fit 2021 model Y cupholders, and a 36oz yeti bottle. I designed it to be printed on an…
Update 4/5/24: Newest version with small changes. Don't print this version! __________________________________________ This is my take on a compact travel box for Splendor. I printed one a while back that was fine, but the lid was huge…
Update 2024-03-09: I've added a new version 4. This version is 2mm shorter, in case V3 touches the buildplate. Objective I wanted a fast print , a direct replacement of the stock duct and of course, better part cooling avoiding to blow on…
Based on ISO/IEC 7810 - ID-1 for perfect fit in your credit card wallet. Thickness 4mm.
Printing Tips This model is sized for a 0.1 mm layer height anything more than that will probably fuse. The space between the model and the hinge is a single layer at 0.1 mm. If the hinges are sticking an adjustable wrench can provide…
Yet another ukulele wall hanger. Tried to make it reasonably stout since the (very small) weight is bending the hooks in the weakest direction. I tried to snap it by hand but couldn't so should be fine for a soprano/tenor ukulele. Would…
Since I've been printing all of these minis for Gloomhaven, I realized that I needed a good way to store and transport them. There are a bunch of excellent mini storage solutions out there, but I'm picky and wanted one that was slightly…
Prints well without supports. Works with original apple charger with USB connector. Inspired by https://www.prusaprinters.org/de/prints/96654-my-apple-watch-charging-stand
Yet another tube squeezer designed in CadQuery and fully parametric/customizable for custom sized tube widths. CadQuery is a type of CodeCAD and is similar to OpenSCAD and is based in python. I have included several widths that should…
If you love your Yeti can-holder like me and you also like to alternate your go-to beverage from those in the standard 375ml cans to those in the shorter 330ml cans, then this simple print is much more cost effective than buying a second…
Yet Another Creality K1 Chain link Riser - Head part For the back I use this one https://www.printables.com/model/773851 --- If you like my work, don't hesitate to support me by paying me a ☕ https://ko-fi.com/fred2u
Probably best to print with PETG rather than PLA due to how hot it gets in vehicles.
I think this style of bracelet is really cool, and thanks to Emmett that inspired me with his Strechy Bracelet ( http://www.thingiverse.com/thing:13505 ). I went for a simple rounded shape with 36 notches. The reason i really wanted to…
I got the idea for this project because I needed a case to put my lighter in my EDC (Everyday Carry). Since I don't use a lighter often, I needed the case to keep it as dry as possible. I believe it's a good addition to an EDC, for…
I tried many of the thumbgrips I found online, but I didn't like any of them so I made my own. I took the best of all designs I tried and combined it into one design to rule them all. You might need to sand it down a little for a smooth…
An updated Yeti collection perfect for your tabletop game! Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here:…
This is a quick little stand to hold up a Korg nanoKONTROL 2 up off the desktop. I use mine as an extended control surface for desktop stuff (volume, screen brightness, etc), so I wanted to have this right behind my keyboard. In case…
This handle was modelled after the official Yeti Rambler 20 oz Tumbler Handle from this link, YETI Rambler 20 oz Tumbler Handle | Sport Chek . It has a slightly loose fit so that users can add electrical tape to the inside of the rambler…
A great wall art of a Yeti, Bigfoot or Sasquatch, it has many names. Do not forget to LIKE the model and upload your makes, thanks ! Inspired by a sticker
This is my take on the brush designed by "Makers Mashup" with some of my own thoughts on design features I thought would be helpful. The idea of a nozzle brush was entirely new to me, but made some sense. I have experienced on more than a…
The model is straightforward; print the handle upside-down, and the insert on its side. Use cyanoacrylate glue for the insert. This was originally designed by jasonalday on Thingi, and the insert design remixed by DanBuro on the same…
I had several design goals in mind: Fast print Careful to cables Easy assembly Possibility to unwind without disassembling (FAILED) The raindrop design prevents cable to bend unnaturally. Box can store any type of cable as long as…
Yet Another Raspberry Pi 2 Case - Two parts, case and lid. Lid has a hex pattern of holes for ventilation. Requires two M2.5 x 12 mm bolts and threaded inserts. Printed on Creality CR-6 SE.
For printing tips/advice: https://github.com/TonyBrobston/yet-another-smart-vent/blob/master/docs/VENT_PRINTING.md Check out the GitHub project for more information. https://github.com/TonyBrobston/yet-another-smart-vent
This is yet another drag chain file in a sea of drag chain files. This one is special because: fusion 360 f3d file is included! This includes parameters which let you specify the chain length, inside diameter, etc. custom supports come…
