Commercial Tap Handle in 2 Parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is just a rework of the predecessor. I had support printing issues with the original design so I split it up to…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 25
- Makes
- 0
- Views
- 241
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is just a rework of the predecessor. I had support printing issues with the original design so I split it up to be glued together later.
How I Designed This
I redid the same customizer the previous thing did, but with no hole in it.
I then hacked up some OpenSCAD just to create the little peg/hole on each part
I then subtracted out the screw hole locally using MeshMixer and a bolt of the correct size (bolt2.stl).
Now, depending on how your printer prints,you may need to adjust the hole.
If you need to, edit bolt2.stl and scale it in the X/Y direction ONLY so that the threads remain the correct height. Then, subtract that bolt out of the "handle part no hole.stl" file.
I'd recommend trying a small cylinder a few times to get things dialed in before wasting your time printing the whole tap handle.
Category: Other