Commercial Tap Handle in 2 Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is just a rework of the predecessor. I had support printing issues with the original design so I split it up to…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is just a rework of the predecessor. I had support printing issues with the original design so I split it up to be glued together later.
How I Designed This
I redid the same customizer the previous thing did, but with no hole in it.
I then hacked up some OpenSCAD just to create the little peg/hole on each part
I then subtracted out the screw hole locally using MeshMixer and a bolt of the correct size (bolt2.stl).
Now, depending on how your printer prints,you may need to adjust the hole.
If you need to, edit bolt2.stl and scale it in the X/Y direction ONLY so that the threads remain the correct height. Then, subtract that bolt out of the "handle part no hole.stl" file.
I'd recommend trying a small cylinder a few times to get things dialed in before wasting your time printing the whole tap handle.
Category: Other