Airport Runway - Additional Plain Module - For the bigger planes
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.46 – €4.23 net (excluding VAT)
For file: Runway-Landebahn_plain_0.4n_0.2mm_PETG,PETG_MK4ISMMU3_2h40m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.84 excluding VAT (range midpoint).
- Weight reported by the author
- 78 g
- Print time reported by the author
- 2.66 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Additional Runway Module for the Bigger Runway. This Modules have base in real Runway paintings.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 126
- Makes
- 0
- Views
- 365
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here some more runway module.
I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to fit the 1:144 airplane models for playing.
Settings | Value |
|---|---|
Infill | 15% |
Perimeters | 2 |
Layer Height | 0.20 mm |
Material | PETG (PLA) |
Supporting Material | none |
Comments |
Feedback is welcome.
Share your makes!