Counting matching models…
Nozzle 0.4 Layer hight 0.2 No Support Details are 2x100x100mm Use a textured plate. Print upside down to get a good surface quality. The track lines are 0.2mm deep. Use the support function to achieve a flat surface on the track. Or use a…
I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to fit the 1:144 airplane models for playing. Check out the additional models: Settings Value Infill 10% Perimeters 2 Layer Height…
Here some more runway module. I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to fit the 1:144 airplane models for playing. Settings Value Infill 15% Perimeters 2 Layer Height 0.20…
Here is a lamp to house a raspberry pi zero that uses aircraft tracking data and some code to flash the light when an aircraft is heading my way. Instructions on the code and how to plot aircraft can be found here…
A free runway model that you can use in your airport models.
If you downloaded the model, it means you are interested in it. Don't forget to like it, please!
Here the Heliport Module. I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to fit the 1:144 airplane models for playing. Settings Value Infill 15% Perimeters 2 Layer Height 0.20 mm…
1:200 Runway Guard Light for Model Airports I made the sticks longer that you can cut them into the correct size you need
Here some more runway modules. I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to fit the 1:144 airplane models for playing. Update: Reversed marking of the start marking. Settings…
Here some more runway modules for direction and order of the runway. L := left ; R := right ; C := center ; Numbers of degrees. I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to…
Here some more runway modules. I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to fit the 1:144 airplane models for playing. Settings Value Infill 15% Perimeters 2 Layer Height…
The printing takes about 2 hours and 30 minutes - it depends on your print settings. About 30g material. I recommend using a printing plate with a contour to make it look like asphalt. To print it like that you have to set a color change…
Here some more Runway CountDdown runway modules. I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to fit the 1:144 airplane models for playing. Settings Value Infill 15% Perimeters…
Ground marking of the runway geo orientation. Numbers of degrees. The degree pairings are: 05 - 23 (Schleswig-Jagel WBG, Hamburg HAM, Finkenwerder XFW) 06 - 24 (Sylt GWT) 07 - 25 (Lübeck Blankensee LBC) 08 - 26 (Nordholz NDZ, Kiel KEL) 09…
STL files added (18.05.2025) Printed in PLA, 0.2 mm layer height. Total need of filament: ca 68 meters Total cost of filament: ca 5,1 €
Mini Cable Runway 18mm H x 26mm W (repeatable segments) I made this to organize some wiring in my 3d printers. The runway parts are repeatable. Just stack them to the size you want. There are also variations on the parts with single-side…
Minneapolis airport runway map No supports Happy printing!!
while building my voron 2.4 I realised I needed something to manage the wiring. This set contains rails of various length that can be double sided taped to wherever you need to run your wires then there are two layers of wire runways and…
Additional Runway End-Module for the other side of the Runway-Modell: Settings Value Infill 20% (adaptive cubic) Perimeters 2 Solid Layers Top: 2 ; Bottom: 2 Layer Height 0.2 mm Speed Material PETG Supporting Material only overhangs /…
If you downloaded the model, it means you are interested in it. Don't forget to like it, please!
![Airport Runway - Heliport - Additional Modules - For the bigger planes [update]](https://media.printables.com/media/prints/993294/images/8427266_22affb0f-49b6-456a-8e5d-bca7c179d5d7_d63b2d5f-d953-45ef-a66a-3ee597d1abe8/pxl_20241220_heliport_01.jpg)
