1 / 1
Manta M8P/M5P Mount for XMax3
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the mount for Manta M8P or M5P for your Qidi X Max3
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 27
- Makes
- 0
- Views
- 341
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
NOTE: BEFORE YOU ARE GOING DOWN THIS ROAD, MAKE SURE YOU KNOW WHAT YOU ARE DOING BEFORE SWAPPING STOCK BOARD. WARRANTY WILL BE VOIDED
This is the mount for the Manta M8P or M5P to be used on the X Max3.
BOM:
- 4x M3 dia4.5mm Heated inserts
- 4x M3 x 8mm socket cap screws
- 3x M3 x 8mm Socket cap screws (from existing MCU board)
Print flat on the plate in this orientation for both M8P and M5P
Installing the Manta on the Xm3 in the orientation as shown (USB side will face to the left (near all the peripheral cables come in).
