1 / 2
Bambu A1 Corner Braces
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Braces to keep the A1 in place during printing.
- Rating
- 0 / 5
- Likes
- 36
- Downloads
- 93
- Makes
- 0
- Views
- 672
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Description
On some surface the Bambu A1 tends to move while printing. I created these corner braces to keep it in place.
I designed this for #6 wood screws a that is what I had laying around, however countersunk M3 should work as well.
IMPORTANT: If you go with the stls over the .3mf, you need to print one of the ones labeled “Switch Corner” and three of the others. The difference is the one labeled “switch corner” has one side shortened by 1cm to accomodate for the on/off switch on the back left corner of the A1.