2.4GHz Helix Dual Feed LNB Antenna System V2 - QO100
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Updated Version of the well known V1, born in 2019 as QO100 open for public.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 316
- Makes
- 0
- Views
- 1,911
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
IF YOU MISS SOMETHING - LOOK in the original V1 package. There are multiple Helix Holders, multiple bend helper for different diameter and so on. I dont wanted to just copy everything here.
So, now to the V2:
Hi,
this is the V2 version of my original design (https://www.printables.com/de/model/389071-holy-the-original-qo-100-24ghz-2-45-turn-helix-dua), released in 2019 @ the QO100 - public opening.
Major Difference?
No Thread - now a fast open/close mechanism
MUCH easier to print, because NO SUPPORT NEEDED!
How does the clamping now work?
The part has theoretical split to make a hinge - Printed without support.
The split is wide enough to work, but small enough it needs no support.
After the print is finished and cooled, just “move” it a little bit and it frees up, ready to use!
Why?
because I can :) But really? The Threaded part was for some users a pita to print.
Compatible with old parts?
YES! You can use your old reflector (you find dxf etc in the V1 package!!!) and helix holder. No need to build a new metal reflector or print a new helix holder.
The holes in the helix holder are following the helix! So no ugly fiddeling the wire into it. Bend the wire with the helper and go :)
Other Changes?
also Yes. I made the cover a little bit longer to fit 4.5 turns not so flush with the cover or even to put 4.75-5 turns under it. The extra weight and lever is so lo, so why not.
I am sure to release more covers, but for now, this is the only one. Time is my problem. If you pay me, i can spend more time on it. No payment, I can only work on it at my free time, which is almost non-existend :( It is like it is.
You have no idea how to bend the HELIX?
https://www.printables.com/model/389065-bend-helper-vor-helix-antennas/files
You need another length cover? Maybe for a 2 turn? Feel free to make your own or ASK !
Happy printing
Sandor - DM4DS
Thanks for supporting me:
Patreon: https://www.patreon.com/dm4ds
Paypal donation: https://www.paypal.com/paypalme/dm4ds
BMAcoffee: https://buymeacoff.ee/dm4ds
Bitcoin: bc1qf426e46h6kdtmws4cjnu6wa3wtzy8qvctq9j9u
Etherium: 0x3447f956194706eCDab747314CFB92Bf55428F28