Venom Pro Blaster Molle Holster

A holster for the Venom Pro.  Molle compatible - use the Molle tabs from your favorite model.  I use the ones from BlitzShorta.  Or if you don't have a Molle belt, use this Molle Belt adapter.

Now includes Left & Right handed versions, and compatibility with the International variation of the Venom Pro.  I am using “US” and “International” nomenclature here - it is entirely made up just to have a reference point for the different variations.  The US version has bumps over the motor housing, and the International does not.  See pictures for details.

NOTE Compare your blaster with the pictures to see which you have and print the correct version for you.

Hardware required for all versions is a single M3 button head screw (about 18-20mm) and a M3 nut, and a small length of 3mm shock cord.  I might also recommend a lock washer for it as over time the nut can work its way free.  The assembly is super straightforward - attach the tab with the screw as shown in the images, then attach the shock cable, ensuring it wraps up and around the notch on the tab, and is tied fairly tightly.  

In the pictures, the gray one is the Left-handed straight model in PLA, the green one is the Right Handed US only straight model in PETG, and the galactic purple one is Right Handed International straight model in PLA.  

Print with  .16 layer height, 5 wall loops, 15% infill.  Supports required for all versions of the holster, but  only some versions of the tab; Right-handed US Only tab does not require any.  Shouldn't need a brim either for any of these depending on your printer.

Print instructions are the same for all versions with one exception.  Make sure you auto-orient your left-handed/international version tab (or lay on face) such that it sits vertically on the flat end like in the picture from my slicer, and use supports so that they go all the way across the bottom of the finger spot.

Most of these have two versions - a straight and an angled (45 degrees) for cross body or chest mount type situations, but there is no angled version for the International one yet.  Will only make if I get a request for it.  A third version I am testing is compatible with a rail attachment (https://www.printables.com/model/1011259-rev-2-ex-bcar-adapter-for-venom-pro-w-lower-picati).  Doesn't allow you to have anything ON the rail, but for aesthetics or for a better BCAR holder, it works great.  It is the white one with green tab in the pictures.  Currently right-handed, US only.

Note that if you have modded your VP such that it affects the front silhouette, this may not work for you as the holster is shaped pretty close to the stock shape.  It should work whether you have the stock sight piece on or not, though.

Due to the asymmetrical nature of the blaster itself, I had to find a different catch point for the tab on the left-handed version.  The best place seemed like the trigger guard.  I tried multiple orientations, this one seems to work the best.  I also used this catch point for the right-handed International version so if you prefer something else, you can try it.  I personally prefer the catch point on the motor mount which feels more ergonomic, but that is simply not present on the International version.

This holster was designed to work with molle, but if you just have a regular belt and do not want to use molle, then you can print this adapter I made which will allow you to use this holster, and many other molle things, with a regular belt. 

UPDATE 1/28/2025:

Added a beefier version of the tab for the right-handed international version based on feedback.  Both versions still available, print instructions same for both.

UPDATE 5/10/2025:

If you don't have Molle things and just want to put this on a belt, use this Molle Belt Adapter I made.

Send me your feedback!