Kong dog toy holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Meant for holding the kong toy vertical in my freezer
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 20
- Makes
- 0
- Views
- 532
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial
This is meant for the kong toys that are about 80mm tall but it probably scales down perfectly to fit the smaller ones.
Two bodies in single step file. Use prusa slic3r or similar to split into objects and slice as needed.
Two parts, print orientation should be obvious.
I used ABS because that's what I had loaded but material, resolution/layer height are not super critical here.
I used a few drops of super glue to attach the nozzle support arm to the main body and let it cure before mounting in my freezer.
The flat part meant to adhere the part to the mounting surface is 13mm tall which should allow for both 10mm and ½ inch size double stick tape. I used ~4cm of VHB tape to attach these into my freezer door.