Stand Up Paddle Board (SUP) Bottle Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand Up Paddle Board (SUP) Bottle Holder for 36oz Yeti Bottles all the way down to a 12oz can of Red Bull
- Rating
- 4.667 / 5
- Likes
- 40
- Downloads
- 173
- Makes
- 3
- Views
- 997
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I wanted a bottle holder that could handle multiple sizes of bottles and cans, This can hold up to a 36oz Yeti all the way down to a 12oz can of red bull. The drain hole in the center matches the bottom of the red bull can to help hold it stable.
This is recommended to be printed in PETG because it's going to be outsize but who am I to tell you what to do. The Tabs are printed in TPU as they must be flexible.
I printed both the holder and the tabs at 50% infill with 4 walls. I used supports on the holder to help the slots print cleanly, then cleaned the supports out using a razorblade. The tabs slide into the slots on the holder and click into place. You may need to use a pair of plyers to pull them into place if you slots are tight. I didn't have any issues with the tabs backing out once in place but if you do, I designed the extra backing on the tab so you could glue the tabs into place.