1 / 4
Coffee wall drawing in 4 parts for Prusa MINI — image 1
1 / 4

Coffee wall drawing in 4 parts for Prusa MINI

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Coffee wall drawing remix for Prusa Mini scaled and cut into 4 pieces with snap connectors (37 cm width when assembled).

Rating
0 / 5
Likes
5
Downloads
31
Makes
0
Views
127
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Remix of the coffee wall drawing by AhmetAtalay_383956, tailored for the Prusa MINI. Total width is between 37 and 38 cm.

Tested with PLA.

Recommendations:
  • The model file contains all 4 parts with snap connector and/or corresponding holes. Mark one part as printable at a time and slice it, then proceed to the next part. You may scale down a little bit if you like.
  • Assemble the snap connectors using medium force before mounting to the wall.
  • Approx printing time (0.2 mm, 15 % cubic infill, 3 perimeters, no brims and no supports): 70 min + 110 min + 70 min + 40 min = 290 min (4 h 50 min, ca. 61 g filament).
  • No support structures needed. If you print with a skirt, it will slightly stick to the snap connectors, but can be removed easily.

Tags