1 / 5
Honda Stem Nut Driver - 07916-KA50100 Replacement
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tool to remove and install the steering stem castle nut. Replaces Honda Tool 07916-KA50100
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 177
- Makes
- 0
- Views
- 493
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
3D printed tool to replace Honda Tool 07916 - KA50100
Used to remove and install the steering stem nut on 226 different Honda Motorcycles.
The nut I designed this part around is P/N: 53229-MN1-650
You can check fitment by clicking here, and selecting “Where Used”
There are two ways to drive this tool:
- 3/8" socket - used for lower torque install steps
- 30mm hex flats - HIGHLY recommended for higher torque applications. a 30mm socket is recommended over a wrench.
Print was 100% infill, PETG.
Supports where used, and broke our very well.