Spring Valve Marching Baritone Keychain
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
So many revisions... but it works! Inside I created a spring to press down the valves on this baritone. It's got .3mm…
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 182
- Makes
- 2
- Views
- 642
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution
So many revisions... but it works! Inside I created a spring to press down the valves on this baritone. It's got .3mm clearance on the sides and 0.5, between vertical surfaces, so it prints in place without any pauses or anything else needed. Once it's done, you should be able to press the valves down with a little force at first.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
No
Supports:
Doesn't Matter
Filament:
Hatchbox PLA
Notes:
Shouldn't require much work, just good print settings. I used the tiny amount of supports cura automatically generated underneath the valves and that seemed to help. Like I said above, it has a 0.3mm gap in the XY and 0.5 in the Z, so hopefully your printer can make that work.
Category: Keychains