1 / 3
Lego Duplo / Fisher-Price Little People adapter — image 1
1 / 3

Lego Duplo / Fisher-Price Little People adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Yet another adapter to put Fisher-Price Little People figures onto Lego Duplo bricks.

Rating
0 / 5
Likes
8
Downloads
58
Makes
0
Views
372
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

All the available adapters here either had round mounts or were too thick (i.e. a full duplo brick in height), so I quickly made my own with OpenSCAD by using W3asel's very nice Little People mount and a modified version of themelle's parametric Lego Duplo brick. Thanks to both for their great work!

Print settings

For a good balance between print time and stability I used

  • 0.2 mm layer height (0.28 mm for the first layer) @ 0.6 mm nozzle diameter
  • 4 Perimeters, top and bottom layers
  • No infill

Any material is fine, I used black DasFilament PLA. Print time is about 40 minutes on an old ass original Ender 3.

If you encounter surface artifacts on the outer vertical walls try reducing the minimum perimeter width of arachne's settings (in PrusaSlicer it's under “Print Settings” > “Advanced” > “Minimum perimeter width”). I reduced mine from 85% to 75% and the artifacts were gone.

Modifying

To build it yourself or modify it make sure to place W3asels flat Little People mount *.stl next to adapter.scad.

Tags