Lego Duplo / Fisher-Price Little People adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another adapter to put Fisher-Price Little People figures onto Lego Duplo bricks.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 372
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
All the available adapters here either had round mounts or were too thick (i.e. a full duplo brick in height), so I quickly made my own with OpenSCAD by using W3asel's very nice Little People mount and a modified version of themelle's parametric Lego Duplo brick. Thanks to both for their great work!
Print settings
For a good balance between print time and stability I used
- 0.2 mm layer height (0.28 mm for the first layer) @ 0.6 mm nozzle diameter
- 4 Perimeters, top and bottom layers
- No infill
Any material is fine, I used black DasFilament PLA. Print time is about 40 minutes on an old ass original Ender 3.
If you encounter surface artifacts on the outer vertical walls try reducing the minimum perimeter width of arachne's settings (in PrusaSlicer it's under “Print Settings” > “Advanced” > “Minimum perimeter width”). I reduced mine from 85% to 75% and the artifacts were gone.
Modifying
To build it yourself or modify it make sure to place W3asels flat Little People mount *.stl next to adapter.scad.