Pass or Fail Print Tubes
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.25 – €2.76 net (excluding VAT)
For file: Pass-or-Fail-Tubes_Short_0.4n_0.2mm_PLA_MINI_2h34m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.51 excluding VAT (range midpoint).
- Weight reported by the author
- 30 g
- Print time reported by the author
- 2.57 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Easily and visually keep track of passed (good) and failed prints using the purge lines from the print!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 76
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
With these simple Pass/Fail tubes, you can easily keep track of how many prints passed, and how many have failed. Simply take the printers purge line from the print and put it in the corresponding tube/cup. I thought it would be interesting to have around printers, so you can see how much that specific printer works, or doesn't work.
The photos you see are using the Short model. The purge lines in the cups are all from my Prusa Mini+. I've only had 2 failed prints, so it's a good representation to show how reliable a printer is. :)
Prints pretty easily, No supports needed, 2 walls and 10% or 15% infill is more than enough for this model.